共找到 251 条与 电真空器件综合 相关的标准,共 17 页
Electronic tubes; electrode terminals; numbering, identificationZusammenhang mit den von der International Electrotechnical Commission (IEC) herausgegebenen Publikationen IEC 67, 2. Ausgabe 1966, IEC 135, 1. Ausgabe 1961 und IEC 236, 1.Ausgabe 1967, und
Electronic tubes; electrode terminals, numbering, identification
Type and dimensions for caps of electronic tubes
Numbering of electrodes and designation of units in electronic tubes and valves
This fourth supplement shall be inserted in the loose-leaf publication IEC 67.
Dimensions of electronic tubes and valves.
Measurement of the electrical properties of electronic tubes; methods of measurement for cold cathode counting and indicator tubesDiese Norm stimmt sachlich überein mit der von der International Electrical Commission (IEC) herausgegebenen Empfeh-lung 151
Measurement of the electrical properties of electronic tubes; method of measurement for cold cathode counting and indicator tubes
1.1 This practice covers rules for designating one, two, or three-piece round wire leads used as conductors through glass seals in electron tubes. Stranded leads and leads for semiconductors are excluded. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
Describes methods for detection of ionizing radiation and for the direct and indirect measurement of field pattern and exposure rate of random incidental radiation emanating from high-voltage electronic tubes. Finally, the typical enclosures for a pulse
Measurements of incidental ionizing radiation from electronic tubes
Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of measuring methods. The measurements described in this publication are not appropriate to every type of cathode-ray tube. They deal with the op
Measurements of the electrical properties of electronic tubes. Part 14 : Methods of measurement of radar and oscilloscope cathode-ray tubes
This amendment forms a part of Military Specification MIL-C-83409(USAF) dated 9 February 1973.
COATINGS, VISOR, POLYCARBONATE, FLYING HELMET
Measurements of the electrical properties of electronic tubes and valves, precautions relating to methods of measurementZusammenhang mit IEC-Publikation 151-0, Ausgabe 1966, siehe Erl?uterungen.Diese Norm enth?lt allgemeine Richtlinien, die die Zuverl?s
Measurements of the electrical properties of electronic tubes and valves; precautions relating to methods of measurement
Measurement of the electrical properties of electronic tubes; measurement of cross-modulation in case of AM-AM transferDiese Norm stimmt sachlich überein mit der IEC-Empfehlung 151-21 Measurement of the electrical properties of electronic tubes, Part 21:
Measurement of the electrical properties of electronic tubes; measurement of cross-modulation in case of AM-AM-transfer
この規格は,電子管に用いる用語とその意味について規定する。
Glossary of terms for electron tubes
Measurements of the electrical properties of electronic tubes; methods of measurement for television picture tubesDiese Norm stimmt sachlich überein mit der Empfehlung 151-16, Ausgabe 1968, Measurement of the electrical properties of electronic tubes and
Measurements of the electrical properties of electronic tubes; methods of measurement for television picture tubes
Measurement of the electrical properties of electronic tubes; measurement of noises due to mechanical or acoustic excitationsDiese Norm stimmt sachlich überein mit der Empfehlung 151-18, 1. Ausgabe 1968, Measurement of the electrical properties of electr
Measurement of the electrical properties of electronic tubes; measurement of noises due to mechanical or acoustic excitations
Measurements of the electrical properties of electronic tubes; measurement of equivalent noise resistanceDiese Norm stimmt sachlich überein mit der IEC-Publikation 151-7 Measurement of the electrical properties of elec-tronic tubes and valves, Part 7: Me
Measurements of the electrical properties of electronic tubes; measurement of equivalent noise resistance
Measurements of the electrical properties of electronic tubes and valves; methods of measuring hiss and humDiese Norm stimmt sachlich überein mit der IEC-Publikation 151-5 Measurement of the electrical propertiesof electronic tubes and valves Part 5: Me
Measurements of the electrical properties of electronic tubes and valves; methods of measuring hiss and hum
This specification covers the optical and durability requirements for abrasion resistin g coatings as applied polycarbonate visors conforming to MIL-V-43511.
COATINGS, VISOR, POLYCARBONATE, FLYING HELMET
Measurements of the electrical properties of electronic tubes and valves; Methods of measurement of spurious and unwanted electrode currentsDiese Norm stimmt sachlich überein mit der Empfehlung 151-15, Ausgabe 1967, Measurement of the electricalproperti
Measurements of the electrical properties of electronic tubes and valves; methods of measurement of spurious and unwanted electrode currents
Measurement of the electrical properties of electronic tubes and valves; methods of measuring noise factorDiese Norm stimmt sachlich überein mit der IEC-Empfehlung 151-4, Ausgabe 1963.Measurements of the electrical properties of electronic tubes and val
Measurement of the electrical properties of electronic tubes and valves; methods of measuring noise factor
Tube and valve shields. Part 1 : General requirements and methods of test
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号