L35 电真空器件综合 标准查询与下载

DIN 44402-14:1971 电子管电气性能测试.第14部分:高真空电子管加热阴极的放射电流的测试方法

Measurements of electrical properties of electronic tubes methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valvesDiese Norm stimmt sachlich überein mit der Empfehlung 151-13, Ausgabe 1966 Measurement of th

Measurements of electrical properties of electronic tubes; methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves

DIN 44401:1971 电子管数据表中的字母符号

Letter symbols in data sheets for electronic tubesZusammenhang mit den von der International Electrotechnical Commission (IEC) herausgegebenen Publikationen 100, Ausgabe 1962; 135, Ausgabe 1962; 148, Ausgabe 1963; 236, Ausgabe 1967 siehe Erl?uterunge

Letter symbols in data sheets for electronic tubes

IEC 60067C:1970 电子管尺寸 补充3

Contains instructions for the insertion of new sheets in Publication 67 and removing of existing ones. Further, some corrections are given. The amendment deals with bases-drawings only.

Dimensions of electronic tubes and valves.

DOT MIL-R-82404 A-1969 军帽勋表(丝带绑扎)

This specification covers requirements fol: the ribbone t o be used as bands on caps worn by Coast Guard enlisted per8onnel.

RIBBON, SERVICE CAP (BAND)

IEC 60151-17:1969 电子管电性能的测量 第17部分:充气管的测量方法

Deals with hot and cold cathode tubes and valves, with gas-filled rectifier tubes, thyratrons except those for pulse modulation, with voltage stabilizing tubes, excluding corona stabilizers and with trigger tubes. Does not apply as a recommendation in th

Measurements of the electrical properties of electronic tubes. Part 17 : Methods of measurement of gas filled tubes and valves

IEC 60067B:1969 电子管尺寸 补充2

Gives instructions for the insertion of new pages and sheets in Publication 67. The amendment contains a quick reference guide to pin numbers and pin circle diameters for various bases. Additionally it deals with bases- and outline drawings and with gaug

Dimensions of electronic tubes and valves.

IEC 60151-21:1969 电子管电性能的测量 第21部分:电子管交叉调制的测量方法

Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of measuring methods. The definitions and the theory are outlined. The principle of the measuring methods described is the determination of the u

Measurements of the electrical properties of electronic tubes. Part 21 : Methods of measurement of cross-modulation in electronic tubes and valves

IEC 60100:1962/AMD1:1969 电子管极间电容的测量方法 修改1

Replaces the sub-clauses 2.2, 2.3, 5.4, 6.1.4 and adds the new sub-clause 2.8.

Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves

IEC 60306-1:1969 光敏器件的测量 第1部分:基本建议

This Recommendation contains definitions and general measuring methods applying to all classes of photosensitive devices, including vacuum phototubes, gas-filled phototubes, photoconductive cells, photovoltaic cells and photomultipliers. Camera tubes are

Measurement of photosensitive devices. Part 1 : Basic recommendations

BS 4319-1:1968 电子管和电子阀(包括微波器件)电气特性测量方法.第1部分:测量等效输入和输出导纳的基本条件

Gives conditions but not measuring methods. Other parts will cover terminology, theory, measuring conditions, basic circuits, and methods of measurement.

Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices) - Essential conditions for measuring equivalent input and output admittances

IEC 60151-18:1968 电子管电性能的测量 第18部分:由机械或声音激励引起的噪声的测量方法

Definitions relating to the excitation and to the resulting effects are given. Measuring methods and instruments are described. They cover microphonic noise with excitation by tapping and by vibration and show the circuit and block diagram, respectively.

Measurements of the electrical properties of electronic tubes. Part 18 : Methods of measurement of noises due to mechanical or acoustic excitations

IEC 60151-8:1966/COR1:1967 电子管电性能的测量.第8部分:阴极加热时间和热丝加热时间的测量

This standard is Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time; Corrigendum 1.

Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time; Corrigendum 1

IEC 60151-15:1967 电子管电性能的测量 第15部分:寄生和不需要的电极电流的测量方法

Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of measuring methods and it also does not apply to gas-filled tubes. The described measurements deal with the effects by which the unwanted curre

Measurements of the electrical properties of electronic tubes. Part 15 : Methods of measurement of spurious and unwanted electrode currents

IEC 60067A:1967 电子管尺寸 补充1

This first supplement shall be inserted in the loose-leaf publication IEC 67.

Dimensions of electronic tubes and valves.

IEC 60151-11:1966 电子管电性能的测量 第11部分:射频输出功率的测量方法

Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of measuring methods. The tube considered can be used in self-oscillating circuits or in drive amplifier circuits. The measurement of the power d

Measurements of the electrical properties of electronic tubes. Part 11 : Methods of measurement of radiofrequency output power

IEC 60151-0:1966 电子管电性能的测量 第0部分:电子管测量方法的有关注意事项

The recommendations are given to ensure reliability of measurements. They should be read in conjunction with the separate sections describing methods of measurement. This general section deals with the theory and with basic circuits as well as with the c

Precautions relating to methods of measurement of electronic tubes and valves

IEC 60067:1966 电子管尺寸

Lays down the recommended practice for the preparation of drawings for inclusion in this Publication including general rules. The inter-conversion and rounding-off of inch and millimetre dimensions are described. Base- and outline-drawings and the caps d

Dimension of electronic tubes and valves

IEC 60151-8:1966 电子管电性能的测量 第8部分:阴极加热时间和热丝加热时间的测量

Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of measuring methods. It deals with the definitions and measuring methods including the relevant circuits for the measurement. Precautions referr

Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time

IEC 60151-12:1966 电子管电性能的测量 第12部分:电极电阻、跨导、放大系数、变频电阻和变频跨导的测量方法

Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of measuring methods. Deals with the definitions, basic theory and measuring conditions. The measuring circuits are described and illustrated for

Measurements of the electrical properties of electronic tubes. Part 12 : Methods of measuring electrode resistance, transconductance,amplification factor, conversion resistance and conversion transconductance

IEC 60151-13:1966 电子管电性能的测量 第13部分:高真空电子管热阴极发射电流的测量方法

Does not apply as a recommendation in the sense of a standard because of the absence of detailed description of measuring methods. The definitions are given and the theory is detailed. D.c. and a.c. voltage methods and pulse voltage methods of measuremen

Measurements of the electrical properties of electronic tubes. Part 13 : Methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves