共找到 321 条与 计算机综合 相关的标准,共 22 页
This standard is about Information technology equipment - Safety - Part 21: Remote power feeding; Corrigendum 1
Information technology equipment - Safety - Part 21: Remote power feeding
This Recommendation defines how Abstract Syntax Notation One (ASN.1) modules can be used in combination with Specification and Description Language (SDL). This text replaces the semantic mappings from ASN.1 to SDL defined in ITU-T Rec. Z.105 (1999). The u
SDL combined with ASN.1 modules (SDL/ASN.1) Study Group 17
This part of IEC 60950 applies to information technology equipment intended to supply and receive operating power via a TELECOMMUNICATION NETWORK, where the voltage exceeds the limits for TNV CIRCUITS. This Part 21 of IEC 60950 is intended to be used wit
Information technology equipment - Safety - Part 21: Remote power feeding
Information technology equipment - Safety - Part 1: General requirements
Information technology equipment - Safety - Part 1 : general requirements.
This subclause describes a mechanism that permits the dynamic discovery of manager and agent stations within a LANMAN environment, the exchange of management knowledge information between manager and agent stations, and the manipulation of notification
Information Technology - SCSI-3 Architecture Model (SCSI-3 SAM) ISO/IEC 14476-411: 1999
1 Equipment covered by this standard This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. This standard is also applicable to such information technology equipment: - designed for use as telecommunication terminal equipment and TELECOMMUNICATION NETWORK infrastructure equipment, regardless of the source of power; - designed and intended to be connected directly to, or used as infrastructure equipment in, a CABLE DISTRIBUTION SYSTEM, regardless of the source of power; - designed to use the AC SUPPLY as a communication transmission medium (see note 4 of clause 6 and note 3 of clause 7). This standard specifies requirements intended to reduce risks of fire, electric shock or injury for the OPERATOR and layman who may come into contact with the equipment and, where specifically stated, for a SERVICE PERSON. This standard is intended to reduce such risks with respect to installed equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer. Examples of equipment which is in the scope of this standard are: NOTE The requirements of IEC 60065 may also be used to meet safety requirements for multimedia equipment. See IEC Guide 112, Guide on the safety of multimedia equipment. This list is not intended to be comprehensive, and equipment that is not listed is not necessarily excluded from the scope. Equipment complying with the relevant requirements in this standard is considered suitable for use with process control equipment, automatic test equipment and similar systems requiring information processing facilities. However, this standard does not include requirements for performance or functional characteristics of equipment. 2 Additional requirements Requirements additional to those specified in this standard may be necessary for: - equipment intended for operation in special environments (for example, extremes of temperature; excessive dust, moisture or vibration; flammable gases; and corrosive or explosive atmospheres); - electromedical applications with physical connections to the patient; - equipment intended to be used in vehicles, on board ships or aircraft, in tropical countries, or at altitudes greater than 2 000 m; - equipment intended for use where ingress of water is possible; for guidance on such requirements and on relevant testing, see annex T. NOTE Attention is drawn to the fact that authorities of some countries impose additional requirements. 3 Exclusions This standard does not apply to: - support equipment, such as air conditioning, fire detection or fire extinguishing systems; - power supply systems which are not an integral part of the equipment, such as motor-generator sets, battery backup systems and transformers; - building installation wiring; - devices requiring no electric power. note:1) A list of informative references is given in annex Q: "Bibliography".
Information technology equipment - Safety - General requirements
1 Equipment covered by this standard This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. This standard is also applicable to such information technology equipment: - designed for use as telecommunication terminal equipment and TELECOMMUNICATION NETWORK infrastructure equipment, regardless of the source of power; - designed and intended to be connected directly to, or used as infrastructure equipment in, a CABLE DISTRIBUTION SYSTEM, regardless of the source of power; - designed to use the AC SUPPLY as a communication transmission medium (see note 4 of clause 6 and note 3 of clause. This standard specifies requirements intended to reduce risks of fire, electric shock or injury for the OPERATOR and layman who may come into contact with the equipment and, where specifically stated, for a SERVICE PERSON. This standard is intended to reduce such risks with respect to installed equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer. Examples of equipment which is in the scope of this standard are: NOTE The requirements of IEC 60065 may also be used to meet safety requirements for multimedia equipment. See IEC Guide 112, Guide on the safety of multimedia equipment. This list is not intended to be comprehensive, and equipment that is not listed is not necessarily excluded from the scope. Equipment complying with the relevant requirements in this standard is considered suitable for use with process control equipment, automatic test equipment and similar systems requiring information processing facilities. However, this standard does not include requirements for performance or functional characteristics of equipment. 2 Additional requirements Requirements additional to those specified in this standard may be necessary for: - equipment intended for operation in special environments (for example, extremes of temperature; excessive dust, moisture or vibration; flammable gases; and corrosive or explosive atmospheres); - electromedical applications with physical connections to the patient; - equipment intended to be used in vehicles, on board ships or aircraft, in tropical countries, or at altitudes greater than 2 000 m; - equipment intended for use where ingress of water is possible; for guidance on such requirements and on relevant testing, see annex T. NOTE Attention is drawn to the fact that authorities of some countries impose additional requirements. 3 Exclusions This standard does not apply to: - support equipment, such as air conditioning, fire detection or fire extinguishing systems; - power supply systems which are not an integral part of the equipment, such as motor-generator sets, battery backup systems and transformers; - building installation wiring; - devices requiring no electric power. note:1) A list of informative references is given in annex Q: "Bibliography".
Information technology equipment - Safety - General requirements
The CDIF family of standards is primarily designed to be used as a description of a mechanism for transferring information between modelling tools. It facilitates a successful transfer when the authors of the importing and exporting tools have nothing i
Information technology Small computer system interface (SCSI) Part 232: Serial Bus Protocol 2 (SBP-2) ISO/IEC 14776-232:2001
The VMEbus specification defines an interfacing system used to interconnect microprocessors, data storage, and peripheral control devices in a closely coupled hardware configuration. The system has been conceived with the following objectives:
Information technology Small Computer System Interface Part 342: Controller Commands-2 (SCC-2) ISO/IEC 14776-342:2000
This part of ISO/IEC 15504 defines the basis for process assessment. Other parts of ISO/IEC 15504 contain guidance that will provide a more detailed understanding of the subject. It is primarily addressed to the competent assessor and other stakeholders
Information technology Small computer system interface (SCSI) Part 381: Optical Memory Card Device Commands (OMC) ISO/IEC 14476-381: 2000
This International Standard will assist the vendors and users of modelling tools and meta-data repositories in developing mechanisms for interchanging information. This International Standard specifies an element of a family of related International Sta
Information technology Small Computer System Interface-3 (SCSI-3) Part 341: Controller Commands (SCC) ISO/IEC 14776-341:2000
本规范规定了触摸查询一体机的技术要求、试验方法、检验规则、标志、包装、运输、贮存等。 本规范适用于由触摸屏、显示器、多媒体计算机,或其它外设等集成于一体的信息查询设备。 本规范是制定产品标准的依据。
General specification for kiosk
이 규격은 정보 기술에서 시스템 개발에 관한 주된 용어와 그 정의 및 대응 영어에 대하여
Information technology-Vocabulary-Part 20 : System development
이 규격은 정보 기술에서 문서 처리에 관한 주된 용어와 그 정의 및 대응 영어에 대하여
Information technology-Vocabulary- Part 23:Text processing
이 규격은 정보 기술에서 개방형 시스템 상호 접속에 관한 주된 용어와 정의 및 대응 영어에
Information technology-Vocabulary-Part 26:Open systems interconnection
이 규격은 정보 기술에 있어서 사무 자동화에 관한 주된 용어와 그 정의 및 대응 영어에 대
Information technology-Vocabulary-Part 27:Office automation
이 규격은 정보 기술에 있어서 근거리 지역 네트워크에 관한 주된 용어와 그 정의 및 대응
Information technology-Vocabulary-Part 25:Local area networks
The VMEbus specification defines an interfacing system used to interconnect microprocessors, data storage, and peripheral control devices in a closely coupled hardware configuration. The system has been conceived with the following objectives: a) to allow communication between devices on the VMEbus without disturbing the internal activities of other devices interfaced to the VMEbus; b) to specify the electrical and mechanical system characteristics required to design devices that will reliably and unambiguously communicate with other devices interfaced to the VMEbus; c) to specify protocols that precisely define the interaction between the VMEbus and devices interfaced to it; d) to provide terminology and definitions that describe the system protocol; e) to allow a broad range of design latitude so that the designer can optimize cost and/or performance without affecting system compatibility; f) to provide a system where performance is primarily device limited, rather than system interface limited.
VME64bus - Specification
Equipment covered by this standard This standard is applicable to mains-powered or battery-powered information technology equipment@ including electrical business equipment and associated equipment@ with a RATED VOLTAGE not exceeding 600 V. This standard is also applicable to such information technology equipment: ?C designed for use as telecommunication terminal equipment and TELECOMMUNICATION NETWORK infrastructure equipment@ regardless of the source of power; ?C designed and intended to be connected directly to@ or used as infrastructure equipment in@ a CABLE DISTRIBUTION SYSTEM@ regardless of the source of power; ?C designed to use the AC MAINS SUPPLY as a communication transmission medium. This standard specifies requirements intended to reduce risks of fire@ electric shock or injury for the OPERATOR and layman who may come into contact with the equipment and@ where specifically stated@ for a SERVICE PERSON. This standard is intended to reduce such risks with respect to installed equipment@ whether it consists of a system of interconnected units or independent units@ subject to installing@ operating and maintaining the equipment in the manner prescribed by the manufacturer.
Information technology equipment - Safety - Part 1: General requirements
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号