L60 计算机综合 标准查询与下载

HJB 389.16-2007 水面舰艇训练模拟器技术要求 第16部分：防化系统

Technical requirements for surface ship training simulators Part 16: Chemical defense systems

HJB 389.11-2007 水面舰艇训练模拟器技术要求 第11部分：综合航海系统

Technical requirements for surface warship training simulators Part 11: Integrated navigation system

HJB 389.6-2007 水面舰艇训练模拟器技术要求 第6部分：指控系统

Technical Requirements for Surface Ship Training Simulator Part 6: Command and Control System

HJB 389.1-2007 水面舰艇训练模拟器技术要求 第1部分：水面舰艇总体

Surface ship training simulator technical requirements Part 1: Surface ship general

HJB 389.2-2007 水面舰艇训练模拟器技术要求 第2部分：导调系统

Technical Requirements for Surface Ship Training Simulator Part 2: Tuning System

HJB 389.15-2007 水面舰艇训练模拟器技术要求 第15部分：舰载航空系统

Technical requirements for surface ship training simulators Part 15: Shipborne aviation systems

HJB 389.4-2007 水面舰艇训练模拟器技术要求 第4部分：声纳系统

Surface warship training simulator technical requirements part 4: sonar system

DB42/T 403-2006 湖北电力信息网络技术监督规范

Technical Supervision Specification for Information Network of Hubei Power System

ITU-T Y.2012-2006 (预发布)NGN的功能要求和结构

The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical

Functional requirements and architecture of the NGN release 1 Study Group 13

ITU-T Y.2111-2006 NGN中的资源和管理控制功能 第13研究组

Resource and admission control functions in Next Generation Networks Study Group 13

Resource and admission control functions in Next Generation Networks Study Group 13

ITU-T SERIE Y SUPP 1 SPANISH-2006 ITU-T分系列.补充对为次世代网络(NGN)发布1范围

ITU-T Y.2000 series – Supplement on NGN release 1 scope

ANSI/VITA 42.3-2006 XMCPCI快速协议层标准

Maps signals to pins for the PCI-X protocol on the XMC mezzanine card.

XMC PCI Express Protocol Layer Standard

BS EN 60950-1:2006 信息技术设备.安全.一般要求

This standard concerns itself withGeneral Safety Requirements of a wide range of Information Technology Equipment. Its intention is to helpreduce the risks of fire, shock or injury to persons coming into contactwith IT equipment and to enable manufacture

Information technology equipment - Safety - General requirements

BS EN 60950-1:2006+A1:2010 信息技术设备.安全性.一般要求

This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. This standard is also applicable to such information technology equipment: ? designed for use as telecommunication terminal equipment and TELECOMMUNICATION NETWORK infrastructure equipment, regardless of the source of power; ? designed and intended to be connected directly to, or used as infrastructure equipment in, a CABLE DISTRIBUTION SYSTEM, regardless of the source of power; ? designed to use the AC MAINS SUPPLY as a communication transmission medium (see Clause 6, Note 4 and 7.1, Note 4). This standard is also applicable to components and subassemblies intended for incorporation in information technology equipment. It is not expected that such components and subassemblies comply with every aspect of the standard, provided that the complete information technology equipment, incorporating such components and subassemblies, does comply. NOTE 1 Examples of aspects with which uninstalled components and subassemblies may not comply include the marking of the power rating and access to hazardous parts. NOTE 2 This standard may be applied to the electronic parts of equipment even if that equipment does not wholly fall within its Scope, such as large-scale air conditioning systems, fire detection systems and fire extinguishing systems. Different requirements may be necessary for some applications. This standard specifies requirements intended to reduce risks of fire, electric shock or injury for the OPERATOR and layman who may come into contact with the equipment and, where specifically stated, for a SERVICE PERSON. This standard is intended to reduce such risks with respect to installed equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer.

Information technology equipment. Safety. Part 1: General requirements

BS EN 60950-1:2006+A12:2011 信息技术设备.安全性.一般要求

This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. This standard is also applicable to such information technology equipment: ? designed for use as telecommunication terminal equipment and TELECOMMUNICATION NETWORK infrastructure equipment, regardless of the source of power; ? designed and intended to be connected directly to, or used as infrastructure equipment in, a CABLE DISTRIBUTION SYSTEM, regardless of the source of power; ? designed to use the AC MAINS SUPPLY as a communication transmission medium (see Clause 6, Note 4 and 7.1, Note 4). This standard is also applicable to components and subassemblies intended for incorporation in information technology equipment. It is not expected that such components and subassemblies comply with every aspect of the standard, provided that the complete information technology equipment, incorporating such components and subassemblies, does comply. This standard specifies requirements intended to reduce risks of fire, electric shock or injury for the OPERATOR and layman who may come into contact with the equipment and, where specifically stated, for a SERVICE PERSON. This standard is intended to reduce such risks with respect to installed equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer. This list is not intended to be comprehensive, and equipment that is not listed is not necessarily excluded from the Scope. Equipment complying with the relevant requirements in this standard is considered suitable for use with process control equipment, automatic test equipment and similar systems requiring information processing facilities. However, this standard does not include requirements for performance or functional characteristics of equipment.

Information technology equipment. Safety. General requirements

BS EN 60950-1:2006+A2:2013 信息技术设备.安全性.通用要求

Information technology equipment. Safety. General requirements

GJB 5613-2006 军用计算机信息系统安全保密产品分类

本标准规定了军用计算机信息系统安全保密产品的分类与代码。 本标准适用于军用计算机信息系统的安全保密产品分类。

Classification of military security product in computer information system

IEC PAS 62453-4:2006 现场设备工具界面规范.第4部分:HART通讯

This part of IEC 62435 provides information for integrating the HART1 protocol into the FDT interface specification (IEC 62453-1). This PAS neither contains the FDT specification nor modifies it.

Field device tool (FDT) interface specification - Part 4: HART communication

IEC PAS 62453-3:2006 现场设备工具界面规范.第3部分:PROFIBUS通讯

This part of IEC 62435 provides information for integrating the PROFIBUS protocol into the FDT interface specification (IEC 62453-1). This PAS neither contains the FDT specification nor modifies it.

Field device tool (FDT) interface specification - Part 3: PROFIBUS communication

IEC PAS 62453-1:2006 现场设备工具界面规范.第1部分:概念和详细描述

1.1 Performance This part of IEC 62453 includes the engineering and commissioning of field devices. Functionality for documentation and audit trail support is also considered. Examples and use cases are mainly given for actors, sensors and remote I/Os. Of course, FDT is prepared to be used for devices like drives, analyzers, recorders, etc. as well. The FDT interfaces are designed in such a way as to support all significant fieldbus protocols. The main focus of this version of FDT does not lie on any specific fieldbus protocol. Due to the scalable structure of FDT it will be easy to add new schemas in order to extend the scope to new protocols. The FDT concept allows a device manufacturer to provide his device specific functionality within an engineering system. So the main capacity of FDT depends on the functionality of the devices and the according applications. This PAS is intended for developers who want to implement FDT components. The FDT concept does not claim to provide a solution for all engineering tasks and the associated tools. Therefore, the engineering subjects "electrical wiring planning, mechanical planning, etc." or the plant management subjects such as "maintenance, optimization, archiving, etc." do not form part of the current performance range of FDT. Some of these aspects may be included with future versions of FDT. 1.2 Audience This PAS is intended as reference material for developers of FDT compliant Frame Applications and DTMs. It is assumed that the reader is familiar with Microsoft ActiveX1 technology and the needs of the Process Control industry or of the field devices. This PAS is intended to facilitate development of DTMs and Frame Applications in the language of choice that supports Microsoft ActiveX. Therefore, the developer of the respective component is expected to be familiar with the technology required for the specific component. Remember, FDT is a client/server architecture implemented in a first step with Microsoft COM.2

Field Device Tool (FDT) interface specification - Part 1: Concepts and detailed description