L62 计算机设备 标准查询与下载

DIN IEC 60796-3:1993 8位和16位数据传送用微处理机系统总线I(多接口总线 I).第3部分:带间接播塞的欧洲卡式组件用机械安装和播脚布置

The document describes a microprocessor system bus for 8 bit and 16 bit data. It describes the mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors.

Microprocessor system bus I; 8-bit and 16-bit data (MULTIBUS I); part 3: mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors (IEC 60796-3:1990); German version HD 593.3 S1:1991

SJ/T 10360-1993 家用电子游戏机通用技术条件

本标准规定了家用电子游戏机的通用技术条件。主要内容包括：技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于各种8位及8位以上的射频输出或音、视频输出的家用台式电子游戏机。

Generic specification for household electronic game machine

ARMY MIL-C-48457 B (1)-1993 11732500:炮兵计算机的操控

This amendment forms a part of MIL-C-48457B(AR), dated 30 June 1981, and is approved for use by the U.S. Army Armament, Munitions, and Chemical Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense.

CONTROL, GUNNER'S COMPUTER: 11732500

ARINC 644 BOOK-1993 便携式维护接入终端

Portable Maintenance Access Terminal(PMAT)

Portable Maintenance Access Terminal(PMAT)

ARINC 644-1993 便携式维护接入终端

Portable Maintenance Access Terminal(PMAT)

Portable Maintenance Access Terminal(PMAT)

BS ISO/TR 9547:1993 程序语言处理机.试验方法.发展和可接受性导则

Programming language processors. Test methods. Guidelines for their development and acceptability

BS ISO TR 9547:1993 编程语言处理器.试验方法.方法开发和可接受性指南

This Technical Report type 3 describes a methodology for determining whether a programming language processor possesses the required characteristics stated in the International Standard for the particular programming language for which it is intended.

Programming language processors - Test methods - Guidelines for their development and acceptability

KS X 5005-1993 业务使用CRT阴极射线管显示装置和键盘

This Korean Industrial Standard specifies the monochrome or multicolor CRT display and keyboard units which are mainly provided for business use in the office. Remarks 1. The office means the place where such general office works are carried out. 2. The office works mean data entry, collation and retrieval of data, document processing, and the others. 3. The CRT display unit means the one using the CRT of 29 to 36 cm in the minimum effective diagonal (called generally from 12 to 15 type) specified in KS C 7004(Type designation system for cathod-ray tubes). 4. The units and numerical values shown in { } in this Standard are based on the traditional units and are currently the criteria in force. 5. Normative references to this standard are as attached table.

CRT display and keyboard units for business use

IEEE 1496-1993 芯片和模块连接总线的标准:SBus

SBUS is a high performance computer I/O interface for connecting integrated circuits and SBus Cards to a computer system motherboard.

Standard for a chip and module interconnect bus: SBus

ANSI/IEEE 1301.3:1993 微机用公制测量设备实施规程标准.2.5 mm连接器对流冷却

Dimension requirements are presented for subracks, plug-in units, printed boards, and backplanes to be used in conjunction with IEEE Std 1301 and with a 2.5 mm connector as defined in IEC 48B (Central Office) 245.

Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm Connectors

ANSI/IEEE 1156.1:1993 计算机模块的标准微机环境规范

Fundamental information on minimum environmental withstand conditions is provided. Intended to be used in those cases in which a generic or detail specification for a certain module has been prepared. Intent is to achieve uniformity and reproducibility in the test conditions for all modules that may make up larger systems and are purported to have a rated environmental performance level.

Standard Microcomputer Environmental Specifications for Computer Modules

GSA A-A-2122 F-1993 办公用计算机架

The stands shall be contemporary style, designed for heavy duty office use.

STANDS, OFFICE MACHINE

BS EN 60821:1992 IEC 821 VME总线.1 byte至4 byte数据用微处理器系统总线

A high performance backplane bus for use in microcomputer systems that employ single or multiple microprocessors.

IEC 821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data

DIN IEC 60822:1992 IEC 822 VSB.IEC 821VME总线的平行分系统总线

IEC 822 VSB; parallel sub-system bus of the IEC 821 VMEbus; identical with IEC 60822:1988; english version HD 576 S1:1990

DIN IEC 60559:1992 微处理机系统二进制浮点运算

The standard describes systems which may be applied for binary floating-point arithmetic of microprocessors. It applies to any software and hardware.

Binary floating-point arithmetic for microprocessor systems (IEC 60559:1989); german version HD 592 S1:1991

HD 593.3 S1-1991 微处理机系统总线.8位和16位数据(多总线I).第3部分:有插脚和插孔(间接)连接器的欧洲卡结构的机械和插脚描述(IEC 796-3-90)

Microprocessor system bus; 8-bit and 16-bit data (MULTIBUS I); part 3: mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors (IEC 796-3:1990)

SJ/T 10204-1991 长城0520A、C-H微型数字电子计算机.技术条件

本标准适用于长城0520A 微型数字电子计算机与长城0520C-H微型数字电子计算机。

Specification for microcomputer Great Wall 0520A,C-H

SJ/T 10198-1991 TJ2220微型化超级小型计算机

本标准规定了TJ 2220微型化超级小型计算机的型号规格、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于TJ 2220计算机。2200系列的其它微型化超级小型计算机也可参照本标准执行。

Super-minicomputer TJ2220

SJ/T 10115-1991 HDS8060型数字电子计算机

本标准规定了HDS8060中型数字电子计算机的产品型号规格、技术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于HDS8060中型数字电子计算机产品，它是生产、检验HDS8060中型机的依据。

Medium digital electronic computer for type HDS8060

SJ/T 10113-1991 CEC-I、IA型中华学习机

本标准适用于CEC-I/IA型中华学习机。

Zhong-hua learning machine for type CEC-I(IA)