M14 通信网传输系统接口 标准查询与下载

ITU-T Q.3314-2012 作为代理移动位置管理的物理实体和移动位置管理物理实体的中央实例之间的接口(M9接口)要求和协议 研究组11

Recommendation ITU-T Q.3314 provides the signalling requirements and protocol for the M9 interface between the mobile location management physical entity as proxy (MLM-PE(P)) and the MLM-PE as the central instance (MLM-PE(C)) specified in Recommendation ITU-T Y.2018.The M9 interface provides information from the MLM-PE(P) and the MLM-PE(C) to registration/update and query mobility location information in both host-based and network-based mobility cases.

Requirements and protocol at the interface between the mobile location management physical entity used as a proxy and the central instance of the mobile location management physical entity (M9 interface) (Study Group 11)

ITU-T Q.3308.1-2012 (预发布)在决策物理实体(PD-PE)之间的接口的Rh资源控制协议第8号(远程文件拷贝rcp8)协议和用户驻地网网关策略执行的物理实体(CGPE-PE):公共开放策略服务(COPS)替代

Recommendation ITU-T Q.3308.1 specifies the rcp8 protocol used between a policy decision physical entity (PD-PE) and a customer premises network gateway policy enforcement physical entity (CGPE-PE).This interface was defined in Recommendation ITU-T Y.2111.The interface can be supported in direct mode and the interaction for resource and admission control between PD-PE and CGPE-PE.

Resource control protocol No. 8 – Protocol at the interface between a policy decision physical entity and a customer premises network gateway policy enforcement physical entity (Rh interface): COPS alternative (Study Group 11)

ITU-T Q.3307.1 AMD 1-2012 (预发布)第七号资源控制协议.域间决策物理实体之间的接口协议(Ri接口).修改件1

Amendment 1 to Recommendation ITU-T Q.3307.1 specifies additions of two attribute value pairs (AVPs) which are Restoration-Indication AVP and Downgraded-Indication AVP. The addition requires to modify the initial reservation procedures (i.e., clauses 7.2.1 and 7.2.2) and to add new AVP information (i.e., clause 10.4) of ITU-T Q.3307.1.

Resource control protocol No. 7 – Protocol at the interface between inter-domain policy decision physical entities (Ri interface) Amendment 1 (Study Group 11)

ITU-T G.959.1-2012 光传送网的物理层接口.15号研究组

This Recommendation provides physical layer inter-domain interface (IrDI) specifications for optical networks which may employ wavelength division multiplexing (WDM). These interfaces may also be employed, where appropriate, as intra-domain interfaces (IaDI).

Optical transport network physical layer interfaces (Study Group 15)

ITU-T Q.3303.3-2012 (预发布)3号资源控制协议.政策决定物理实体(PD-PE)和政策执行物理实体(PE-PE)之间的RW接口协议:直径形态.第2版

This Recommendation provides the stage 3 specification of the protocol at the interface between policy decision physical entities (PD-PE) and the policy enforcement physical entity (PE-PE). The functional requirements and the stage 2 specifications for this interface are contained in clause 9.2 of [ITU-T Y.2111] and in [ITU-T Q-Sup.51].This interface is used to control policy enforcement functions in the transport devices, including QoS resource control (e.g., packet marking, filtering and policing), gate control, and NAPT/NAT traversal control. The PE-PE may reside in any injection node across access networks, core networks and network border gateway.This Recommendation defines:The information to be exchanged between the PD-PE and the PE-PE over the Rw interface.An Rw interface definition based on the Diameter protocol.

(Pre-Published) Resource control protocol No. 3 Protocols at the Rw interface between a policy decision physical entity (PD-PE) and a policy enforcement physical entity (PE-PE): Diameter profile version 2

ANSI/SCTE 40-2012 数字电缆网络接口标准

Defines the characteristics and normative specifications for the digital network interface between a cable television system and commercially available digital cable products that are used to access multi-channel television programming

Digital Cable Network Interface Standard

ITU-R M.2012 SPANISH-2012 高级国际移动通信(IMT-Advanced)地面无线接口的详细规范

This Recommendation identifies the terrestrial radio interface technologies of International Mobile Telecommunications-Advanced (IMT-Advanced) and provides the detailed radio interface specifications.

Detailed specifications of the terrestrial radio interfaces of International Mobile Telecommunications Advanced (IMT-Advanced)

ITU-R M.2012 FRENCH-2012 高级国际移动通信(IMT-Advanced)地面无线接口的详细规范

This Recommendation identifies the terrestrial radio interface technologies of International Mobile Telecommunications-Advanced (IMT-Advanced) and provides the detailed radio interface specifications.

Detailed specifications of the terrestrial radio interfaces of International Mobile Telecommunications Advanced (IMT-Advanced)

ANSI/SCTE 104-2012 自动化系统至压缩系统的通信应用程序接口(API)

Automation System to Compression System Communications Applications Program Interface (API)

ITU-T G.8012.1-2012 以太网传输网接口.15号研究组

This Recommendation defines the interfaces of the Ethernet transport network to be used within and between subnetworks of the Ethernet network, in terms of Ethernet transport hierarchy, formats for mapping and multiplexing client signals into Ethernet connections and formats for multiplexing Ethernet connection signals into Ethernet or non-Ethernet connection signals. These interfaces support the transport of Ethernet services, so-called Ethernet virtual connection (EVC) services, as defined in [ITU-T G.8011]. The Ethernet connections support e-Line, E-Tree and E-LAN Ethernet services as defined in [ITU-T G.8011]. This Recommendation specifies the interworking aspects between EVC service signals on an Ethernet user-to-network interface (UNI) and Ethernet connection signals on an Ethernet network-to-network interface (NNI). This Recommendation does not specify the Ethernet component and/or equipment models to meet the Ethernet NNI. Those components and models are defined in [ITU-T G.8021] and [ITU-T G.8021.1]. The interfaces defined in this Recommendation can be applied at NNIs and UNIs of the Ethernet transport network. The Ethernet UNI is formed by an Ethernet interface and the Ethernet NNI by an Ethernet interface or an Ethernet over Transport interface. The Ethernet over Transport NNI uses various server layer networks like optical transport hierarchy (OTH) and SDH. [ITU-T G.8012] describes the mapping of ETH_CI into those server layers mainly for Ethernet private line applications. This Recommendation describes the mapping of S-EC, B-EC, BS-EC, L-EC and ESP signals into those server layers for an Ethernet transport network application which deploys a mix of ETY and OTH server layers. It is recognized, for Ethernet over Transport interfaces used within Ethernet subnetworks, that aspects of the interface are transport technology dependent. The transport technology dependent aspects are defined in the transport technology specific Recommendations, e.g., [ITU-T G.709] and [ITU-T G.707]. The operations, administration and maintenance (OAM) functionality necessary for operations and management of Ethernet subnetworks is described in [ITU-T G.8013]. The detailed requirements are specified in a number of ITU-T Recommendations, IEEE Standards and MEF Technical Specifications, which are referred to. This Recommendation provides a description of the applicability of Ethernet OAM to the different types of Ethernet connections. Note that [ITU-T G.8012] was developed prior to [ITU-T G.8013] and did not discuss Ethernet OAM.

Interfaces for the Ethernet transport network (Study Group 15)

ITU-R M.1850-1-2012 国际移动通信-2000(IMT-2000)卫星元件用无线电接口的详细规范

This Recommendation identifies the IMT-2000 satellite radio interface specifications, originally based on the key characteristics identified in the output of activities outside ITU. These satellite radio interfaces support the features and design parameters of IMT-2000, including the capability to ensure worldwide compatibility, international roaming, and access to high-speed data services.

Detailed specifications of the radio interfaces for the satellite component of International Mobile Telecommunications-2000 (IMT-2000)

ANSI/ATIS 0300227.a-2012 ATIS 0300228.2007标准补充件,运行、管理、维修和保障(OAM&P).支持故障管理的接口(故障管理)

Supplement to ATIS 0300228.2007, OAM&P - Interface to Support Fault Management (Trouble Administration)

ITU-T Q.3305.1-2011 5号资源控制协议(rcp5).传输资源控制物理实体和政策决定物理实体(Rt接口)之间的接口协议:基于直径.2号研究组

This Recommendation provides the stage 3 specification of the Rt interface (rcp5). The Rt protocol is used between the policy decision physical entity (PD-PE) and the transport resource control physical entity (TRC-PE) in the resource and admission control functional block. The Rt interface provides the ability for the PD-PE to request the TRC-PE entities in the involved networks to detect and determine the requested QoS resource for a given media flow. The PD-PE may also request the TRC-PE to provide the path selection information for a given flow in the core network. The functional requirements corresponding to this interface are contained in clause 8.5 of [ITU-T Y.2111] and in [ITU-T Q-Sup.51].

Resource control protocol No. 5 (rcp5) – Protocol at the interface between transport resource control physical entity and policy decision physical entity (Rt interface): Diameter-based (Study Group 11)

ITU-T T.809-2011 信息技术. JPEG 2000图像编码系统: 三维数据的扩展名

Information technology - JPEG 2000 image coding system: Extensions for three-dimensional data

ITU-T M.3361-2011 企业对政府的管理接口商家到政府(B2G)接口引入的要求 研究组2

Recommendation ITU-T M.3361 introduces the specification for high level requirements of business-to-government (B2G) management interfaces,including its general requirements,specific requirements,as well as security requirements.This Recommendation also defines the concept of B2G management interfaces and its relationship with existing business-to-business and customer-tobusiness management interfaces (B2B and C2B) Recommendations.The B2G management interface has additional requirements to those of B2B/C2B interfaces,which has impacts on the activities of both the service provider/network operator (SP/NO) as well as on the National Administrations/Government (G) activities.The interactions between SP/NO and G entities are addressed in clauses 6 to 9. B2B and C2B interface specifications will be reused in the development of the B2G management interface.

Requirements for business-to-government management interfaces – B2G interfaces – Introduction

DIN EN 300175-7:2011 数字增强型无绳通信(DECT).通用接口(CI).第7部分:安全特征(英文版本EN 300175-7 V2.3.1 (2010-06) 作为德国标准)

Digital Enhanced Cordless Telecommunications (DECT) - Common Interface (CI) - Part 7: Security features (Endorsement of the English version EN 300175-7 V2.3.1 (2010-06) as German standard)

DIN EN 300392-5:2011 地面集群无线电(TETRA)- 声音加数据(V+D).第5部分:外围设备接口(PEI)(英文版本EN 300392-5 V2.2.1 (2010-07)的核准本作为德国标准)

Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) and Direct Mode Operation (DMO) - Part 5: Peripheral Equipment Interface (PEI) (Endorsement of the English version EN 300392-5 V2.2.1 (2010-07) as German standard)

DIN EN 300392-3-5:2011 地面集群无线电(TETRA)-声音加数据(V+D)-第3部分:系统间接口(ISI)上的交互工作.第5分部分:移动性管理的附加网络特性(ANF-ISIMM)(英文版本EN 300392-3-5 V1.4.1 (201的核准本

Terrestrial Trunked Radio (TETRA) - Voice plus Date (V+D) - Part 3: Interworking at the Inter-System Interface (ISI) - Sub-part 5: Additional Network Feature for Mobility Management (ANF-ISIMM) (Endorsement of the English version EN 300392-3-5 V1.4.1 (201

ANSI/ATIS 0300228-2011 运行,管理,维修和保障(OAM&P).通过管辖界限支持故障管理的操作系统间接口服务

OAM&P - Services for Interfaces Between Operations Systems Across Jurisdictional Boundaries to Support Fault Management (Trouble Administration)

ITU-T Q.3321.1-2010 1号资源控制协议,第2版本;协议中业务控制实体和政策决定实体间的Rs接口.11号研究组

This Recommendation provides the stage 3 specification of the protocol at the interface between service control entities (SCEs) and the policy decision physical entity (PD-PE). The functional requirements and the stage 2 specifications for this interface are contained in clause 8.1 of [ITU-T Y.2111] and in [b-ITU-T Q-Sup.51]. This interface is used to control session-based policy.

Resource control protocol No.1, version 2 – Protocol at the Rs interface between service control entities and the policy decision physical entity (Study Group 11)