N45 投影器、幻灯机 标准查询与下载



共找到 112 条与 投影器、幻灯机 相关的标准,共 8

The document specifies requirements for measuring and documenting key performance parameters for CRT and laser-based projectors and other variable resolution projectors that are capable or multiple variable resolutions and in which the image is rasterscanned. The provisions of the document are designed to codify the measurement of the performance of variable resolution projectors and are not intended to provide design goals for manufacturers of such equipment.

Electronic projection - Measurement and documentation of key performance criteria - Part 2: Variable resolution projectors (IEC 61947-2:2001); German version EN 61947-2:2002

ICS
33.160.99;37.040.10
CCS
N45
发布
2002-07
实施
2002-07-01

A-A-59143, dated 2 December 1997, has been reviewed and determined to be valid for use in acquisition.

TABLE, SHADOW, PARACHUTE CANOPY INSPECTION

ICS
CCS
N45
发布
2002-06-11
实施

This part of IEC 61947 specifies requirements for measuring and documenting key performance parameters for CRT and laser-based projectors and other variable resolution projectors that are capable of multiple variable resolutions and in which the image is raster-scanned. The provisions of this standard are designed to codify the measurement of the performance of variable resolution projectors and are not intended to provide design goals for manufacturers of such equipment. This standard is intended for variable resolution projectors (including projection displays that are capable of multiple variable resolutions) that are designed for use with primarily discrete colour (RGB) raster-scanned video, text, and graphics signals generated by computer equipment. NOTE These devices may also accept composite or component television video signals encoded to NTSC/RS170A, PAL, SECAM, or future HDTV, or ATV standards, which are fully described in their respective documentation and are not within the scope of this part of IEC 61947. In this part of IEC 61947, all of these signals are referred to as television video (TV video) (see IEC 60107-1 [27]). Displays with fixed resolutions (i.e. individual pixel light sources or matrix displays such as liquid crystal, DMD, plasma, or electroluminescent panels), are not fully addressed by this standard, and reference should be made to IEC 61947-1. Factors outside the scope of this standard that may have a bearing on projector performance are listed in annex E. A discussion of considerations informing the development of standard appears in annex C.

Electronic projection - Measurement and documentation of key performance criteria - Part 2: Variable resolution projectors

ICS
33.160.60
CCS
N45
发布
2001-09
实施
2002-09-09

A-A-50767, dated 9 June 1995, has been reviewed and determined to be valid for use in acquistion.

ANALYZER, SURFACE FINISH

ICS
CCS
N45
发布
2001-08-21
实施

MIL-S-3951D, dated 19 January 1999, is hereby reactivated and may be used for either new or existing design acquisition.

SERVICE RIBBONS AND BARS, SERVICE RIBBONS

ICS
CCS
N45
发布
2001-06-19
实施

本标准规定了直排式和圆盘式普通幻灯机、片卷式幻灯机的定义、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于放映5×5幻灯片及135幻灯片卷的幻灯机,不适用于其它规格及特殊用途的幻灯机。

Technical specification of slide projecfors and filmstrip projectors

ICS
37.040.10
CCS
N45
发布
2001-04-09
实施
2001-09-01

本标准规定了投影片薄膜,投影片和投影片框的类型、尺寸和基本要求,以保证投影片在投影器上使用的最佳兼容。 本标准适用于A型、B型和C型透射式投影器,不适用于其它用途,如反射式投影器。

Overhead projectors - transparencies and transparency frames - Dimensions

ICS
37.040.10
CCS
N45
发布
2000-08-15
实施
2000-10-01

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

ELECTRO-CHEMICAL MACHINE, GRINDING, SURFACE

ICS
CCS
N45
发布
1999-09-28
实施

Overhead projectors film rolls, cores and winders dimensions

ICS
37.040.10
CCS
N45
发布
1999-08-06
实施
2000-01-01

この規格は,長さ,角度,輪郭などを測定する測定投影機について規定する。測定投影機は,投影レンズ,スクリーン,照明装置,載物台又は精密十字動テーブル及びこれらを保持する本体からなる(付図1,付図2,付図3参照)。

Profile projectors

ICS
17.040.01
CCS
N45
发布
1999-03-20
实施

MIL-S-3951Dt dated 23 April 1993, is inactive for new design and is no longer used, except for replacement purposes.

SERVICE RIBBONS AND BARS, SERVICE RIBBONS

ICS
CCS
N45
发布
1999-01-19
实施

This amendment forms a part of MIL-1-6 1 15A, dated 29 March 195 1 , and is approved for use by all Departments and Agencies of the Department of Defense.

INSTRUMENT SYSTEMS, PITOT TUBE AND FLUSH STATIC PORT OPERATED, INSTALLATION OF

ICS
CCS
N45
发布
1999
实施

本标准规定了教学用三种正方形台面(A型、B型和C型)透射式投影器其投影台画面区尺寸、平整区尺寸、定位销位置和尺寸以及投影头支承杆位置。这三种投影器光路示意如图1。其中A型、B型与ISO 7943.1《投影器 投影台尺寸》等效。 本标准也规定了三种长方形台面《A|(1)型、B|(1)型、C|(1)型》透射式投影器投影台尺寸,适用于低箱体便携型投影器。这三种投影器光路示意如图2。 本标准还规定了反射式投影器投影台尺寸,这种投影器光路示意如图3。 本标准不适用于其它特殊用途的投影器,不包括诸如射线照片投影用的专用设备。

Overhead projectors-projection stages dimensions

ICS
37.040.10
CCS
N45
发布
1998-06-15
实施
1998-12-01

本标准规定了35mm双画幅和单画幅规格幻灯片的胶片形式、尺寸、布局和缠绕方向。 本标准中的尺寸涉及有伴音或无伴音幻灯片。 本标准不涉及用个人照相机曝光的35mm照片。

35mm filmstrip-specifications for double-frame and single-frame formats

ICS
37-010
CCS
N45
发布
1998-06-15
实施
1998-12-01

Audiovisual Systems - Slide Trays for Projectors - Circular Slide Tray ANSI/PIMA IT7.211-1998

ICS
37.040.10
CCS
N45
发布
1998-04-28
实施

This notice should be filed in front of MIL-T-13906H dated 1 November 1993

TABLES, WORK, MAINTENANCE

ICS
CCS
N45
发布
1998-04-06
实施

MIL-A-85505(AS) is inactive for new design and is no longer used except for replacement purposes.

ALTIMETER, STANDBY, TYPES I& II

ICS
CCS
N45
发布
1998
实施

この規格は,スライド及びフィルムストリップの1種類又は数種類を映写することができるスライド映写機(以下,映写機という。)について規定する。ただし,この規格は,内蔵スクリーンだけを使用するもので,スクリーンの長辺の長さが120 mm以下のものには適用しない。

Slide projectors

ICS
37.040.10
CCS
N45
发布
1997-10-20
实施

This commercial item description covers a table for inspection of parachute canopies.

TABLE, SHADOW, PARACHUTE CANOPY INSPECTION

ICS
CCS
N45
发布
1997
实施

This notice should be filed in front of MIL-W-l7247B(AS), dated 4 February 1974.

WIND MEASURING SET AN/UMQ-5( ) (COMPONENTS OF)

ICS
CCS
N45
发布
1996-09-16
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号