共找到 112 条与 投影器、幻灯机 相关的标准,共 8 页
The standard specifies the dimensions for unframed and framed transparencies including all projection aids for overhead projectors of the types A, B and C according to DIN 108 part 7, allowing the compatibility between the overhead projectors and the transparencies.
Slide projectors and slides; overhead projectors; transparent films, transparencies, projection aids
This commercial item description covers one type of instrument screw suitable for attaching temples onto the spectacle frame. It is intended to be used on the 3-barrel hinge.
SCREW, INSTRUMENT, SPECTACLE FRAME, 3-BARREL
MIL-B-11839D dated 18 May 1982, has been reviewed and determined t o be valid for use in acquisition.
BAROMETER, ANEROID ML-434( )/PM
This part of the standard specifies the film type for transparencies and the dimensions of mounted and unmounted transparencies, including transparency frames, in order to ensure compatibility between the projectors and transparencies within each type of projector system described.
Photography; Overhead projectors; Part 2 : Transparencies and transparency frames; Dimensions
In addition to the film roll core dimensions and film roll diameters, this part of the standard specifies the dimensions of the keys on winders for film rolls fitted to the projetor scroll units or attachments. It does not require that scroll units for one projector type accept film rolls intended for another type.
Photography; Overhead projectors; Part 3 : Film rolls, cores and winders; Dimensions
The standard specifies a testing method for the measurement of the temperature on the picture area of overhead projectors in accordance with DIN 108 part 7 which enables an examination of the temperature rise of transparencies.
Evaluation of still projectors with incandescent lamps; measurement of temperature in the projection area of overhead projectors
Audiovisual Systems - Overhead Projectors - Film Rolls, Cores and Winders (dimensions) / Note: reaffirmation and redesignation of ANSI/ISO 7943.3-1987 and ANSI IT7.217-1989
This Commercial Item Description This specification covers one type of metallic belt cartridge link intencTedto hold 7.62MM munition in the form of flexible belts for use I n 7.62MM machine wns.(CID), describes a meter, multiple s c a l e , with battery
METER, MULTIPLE SCALE
Audiovisual Systems - Overhead Projectors - Transparencies and Transparency Frames (dimensions) / Note: reaffirmation and redesignation of ANSI/ISO 7943.2-1987 and ANSI IT7.212-1989
Настоящий стандарт устанавливает номенклатуру основных показателей качества фотоувеличителей, включаемых в ТЗ на НИР по определению пер
Product-quality index system. Photographic enlargers. Nomenclature of indices
Evaluation of still projectors with incandescent lamps; measurement of temperature in the picture area of slides
Specifies the procedures, types of tests, and conditions of tests for verifying the expected life of photographic slide projectors as stipulated.
Photography (Projection Equipment) - Slide Projectors - Life Testing
Slide projectors and slides; outer diameter for lens mount of projection lenses
Lamp housing for still picture projection and motion-picture projection; safety require-ments for lamp housings for high-pressure discharge lamps and for safety equipment Boite à lumière pour projecteur fixe ou cinématographique; prescriptions de sécurité
Lamp housing for still picture projection and motion-picture projection; safety requirements for lamp housings for high-pressure discharge lamps and for safety equipment
The General Sevices Administration has authorized the use of this
ANALYZER, SURFACE FINISH
This specification establishes the performance, design, and test requirements for Standby Altimeters Types I and II. These altimeters are counter pointer integrally lighted with 2-inch dial for display of pressure-altitude for the range of -1,000 t o 50,000 feet or -1,000 to 70,000 feet as applicable to type.
ALTIMETER, STANDBY, TYPES I& II
This specification covers one type of precision barometer used for meteorological purposes and designated Barometer, Aneroid ML-434( )/PM.
BAROMETER, ANEROID ML-434( )/PM
Slide projectors and slides; overhead projectors, DIN-test transparency for the examination of sharpness for projection and viewing conditions
Slide projectors and slides; projection lenses for overhead projectors, optical dataDia-projecteurs et diapositives; objectifs de projection pour rétroprojecteurs, mesures charactéristiques
Slide projectors and slides; projection lenses for overhead projectors, optical data
This specification covers the following components of Wind Measuring Set AN/UMQ-5 ( ):
WIND MEASURING SET AN/UMQ-5( ) (COMPONENTS OF)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号