N47 缩微复印机械 标准查询与下载

JB/T 5532-2007 静电复印干式色调剂流动性测定方法

本标准规定了静电复印干式色调剂（以下简称“色调剂”）流动性测定方法，其中包括术语、符号、原理、使用的仪器、测定的环境条件、取样方法、测定步骤、测定结果和报告。 本标准适用于干式双组份色调剂及干式单组份显影剂流动性的测定，不适用于载体流动性测定。

Measurement method of fluidity for toner in dry electrostatics copying

JB/T 6155.1-2007 静电复印机维修导则.总则

JB/T 6155的本部分规定了静电复印机维修管理工作的基本要求和维修质量责任的处理原则。 本部分适用于静电复印机维修方、生产经销企业（供方）和用户。

Servicing directives for electrostatic copying machine.Generic specification

JB/T 6796-2007 透射式复印机调试版A3_T

本标准规定了透射式复印机调试版A3的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于检查重氮复印机复印品质量的透射式复印机调试版A3（以下简称调试版）。

Adjusting test chart (A3 )for transmission copying

JB/T 6155.3-2007 静电复印机维修导则.维修方资格审查及管理办法

JB/T 6155的本部分规定了静电复印机维修方的资格条件，资格审查内容、方式以及静电复印机维修方管理办法。 本部分适用于静电复印机维修方的管理工作。

Servicing directives for electrostatic copying machine.Methods for checkup and administration of qualineation for servicing departments

JB/T 6797.1-2007 重氮复印机维修导则.设计阶段的维修性研究

JB/T 6797 的本部分规定了重氮复印机开发设计阶段维修性研究的目的、要求，给出了供参考的维修性设计准则和维修性设计检查表。 本部分适用于 JB/T 6157 所规定的重氮复印机。

Servicing directives for diazo copying machine.Servicing research for designing stage

JB/T 6155.6-2007 静电复印机维修导则.维修器材管理办法

JB/T 6155 的本部分规定了静电复印机维修工作所用零件、部件、材料和工具等维修器材的管理原则和采购、储运、经销、使用等环节的管理办法。 本部分适用于静电复印机（以下简称复印机或主机）维修方（单位或个人）。 向维修方提供（出售）复印机维修器材的复印机主机生产企业、复印器材生产企业和复印机零部件协作加工企业亦应参照执行。

Servicing directives for electrostatic copying machine.Managing methods of servicing equipment

JB/T 6797.4-2007 重氮复印机维修导则.维修质量检查与维修信息管理

JB/T 6797 的本部分规定了重氮复印机维修质量进行检查、认可的方法及维修信息的管理方法。 本部分适用于JB/T 6157所规定的重氮复印机。

Servicing directives for diazo copying machine.Checking for servicing quality and managing for servicing information

JIS B 0137:2007 间接静电处理复印机术语汇编

この規格は，一般に用いられる間接静電複写機の主な用語及びその定義について規定する。

Glossary of terms for indirect method electrostatic process copying machines

ANSI/INCITS/ISO/IEC 24711:2007 彩色喷墨式打印机和包含打印机组件的多功能设备用墨盒产出率测定方法

Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components

ANSI/INCITS/ISO/IEC 24712:2007 办公设备耗材量的测量用彩色试验页

Colour test pages for measurement of office equipment consumable yield

ASTM F1478-06 测定复印机和打印机印的制图像耐磨性的标准试验方法(泰伯法)

The degree of image abraded from a copy or printed image may be affected by various factors, including the type of machine, condition of the machine, supplies employed, time since imaging, and environmental conditions. As many as possible of these variables should be controlled during the test. If available, a control sample with known characteristics should be run along with the test samples. This test method may be used to determine image resistance to damage or deterioration as a result of exposure to abrasive forces, such as automated document handling devices. This test method may be used for control of product quality, comparative analysis of machines, comparative analysis of imaging components, as well as a research and development tool. This test method is adaptable to images produced from most nonimpact printers and copiers. The printers shall be capable of utilizing the available program to produce the specified image. If the user wishes to simulate the type of damage or smudge resulting from paper rubbing against the printed image or from normal handling, consideration should be given to using either the Crockmeter Method (Test Method F 1319), the Sutherland Rub Method, or the Gavarti GA-CAT Method. 1.1 This test method covers a procedure for determining the amount of image abraded from the surface of a document.1.2 This test method may be used to evaluate the abrasion resistance of images produced by business imaging products, including nonimpact printers, thermal transfer printers, and copiers. The machine shall be capable of producing the specified image.1.3 Testing focuses on determining the amount of imaged material removed, resulting from forces which impart a rubbing or grinding action principally on the top surface of the image.1.4 Comparison may be made between various imaging devices or the image-producing components of an individual machine.1.5 Other test methods employing the Crockmeter (Test Method F 1319), Sutherland Rub Tester, and Gavarti GA-CAT may be employed to evaluate the smudge and abrasion characteristics. Results by these test methods are not necessarily equivalent to those obtained by this test method.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)

ASTM F974-06 黑白静电复印机的上色度的测试方法

This practice is for determining the color response of an electrostatic copy system by examining the black and white copies obtained from an electrostatic copier. This practice covers the capability of a copy system to reproduce various solid colors in varying shades of grey or black and white.1.1 This practice covers the determination of the color response of an electrostatic copy system, black and white output.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determination of Color Response of Electrostatic Copying System, Black and White Output

ASTM F974-06(2011)e1 黑白静电复印机的上色度的测试方法的标准操作规程

This practice is for determining the color response of an electrostatic copy system by examining the black and white copies obtained from an electrostatic copier. This practice covers the capability of a copy system to reproduce various solid colors in varying shades of grey or black and white.1.1 This practice covers the determination of the color response of an electrostatic copy system, black and white output. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determination of Color Response of Electrostatic Copying System, Black and White Output

ISO/IEC 21117:2005 信息技术.办公设备.复印机和多功能设备.说明书和相关试验办法中含有的信息

This International Standard specifies the information to be listed in specification sheets for electrophotographic digital copying machines and multi-function devices. The intention of this International Standard is to allow purchasers and users to compare the characteristics of different models of copying machines and multi-function devices so that they can more easily select copying machines and multi-function devices that meet their requirements.

Information technology - Office equipment - Copying machines and Multi-function devices - Information to be included in specification sheets and related test methods

ISO/IEC TR 24705:2005 信息技术.办公器材.彩色图像复印机.数字和模拟试验用图表的彩色设备的图像复印列表法

The colour reproduction properties of office devices, e.g. printers, scanners and monitors, may depend on the device system, which includes e.g. the device properties and settings, the device driver, the file format, the computer operating system and the application software. The method of this Technical Report is to test how the reproduction changes if one or several of the parameters are varied, such as the device properties or settings, the device driver, the file format, the computer operating system, the colour space, and the application software. This allows manufacturers and users to get a feeling or data about the influence of the different parameters on the reproduction.

Information technology - Office machines - Machines for colour image reproduction - Method of specifying image reproduction of colour devices by digital and analog test charts

BS 6660-1:2005 缩微照相和数字成像装置的安装和维护指南.缩微照相

This British Standard provides guidance on planning, operating and maintaining a micrographics unit. It provides only a general outline of the matters to be considered, and users are advised to consult specialists about their detailed requirements.

Guide to setting up and maintaining micrographics and digital imaging units - Micrographics

ASTM F2494-05 复印机和类似的办公成像设备的能量消耗测定的标准试验方法

1.1 This procedure provides a test method by which electro-photographic copiers and similar office imaging equipment may be rated for energy consumption.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment

ASTM F2495-05 有复印能力的MFDs和类似的办公成像设备的能量消耗测定的标准试验方法

1.1 This procedure provides a test method by which multifunctional devices (MFDs) with electro-photographic copying capability and similar office imaging equipment may be rated for energy consumption.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment

JIS X 6910:2004 信息技术.办公设备.复印机和多功能设备.规格单中的信息和相关试验方法

この規格は，購入者及び使用者が自分の要求に合った複写機・複合機を選択しやすくするために，異なった機種間の複写機・複合機の性能を比較できるように，複写機・複合機の仕様書に記載すべき最小限の情報について規定する。また，これに関連する試験方法についても規定する。

Information technology -- Office equipment -- Copying machines and Multi-function devices -- Information to be included in specification sheets and related test methods

JB/T 10453-2004 速印(油印)机技术条件

本标准规定了速印（油印）机的技术要求、试验方法、检验规则和标志、包装、运输和贮存。 　　本标准适用于单相电源供电、I类防电击保护、自动或手动印刷两用的速印(油印)机。

Stencil duplicator (Mimeograph) Technical Condition