N47 缩微复印机械 标准查询与下载

JIS B 7186:1997 透明缩微胶片阅读机和阅读印刷机

この規格は，拡大率が50: 1以下の黒白フィルム用のマイクロフィルムリーダ(以7，リーダという。)及びマィクロフィルムリーダプリンタ(以下，リーダプリンタという。)について規定する。備考1.携帯を主目的とするポケットリーダなどの簡易なリーダには適用しなしい。

Readers and reader-printers for transparent microforms

JB 8616-1997 复印机械（包括其它办公事务设备）的安全保护

本标准规定了额定电压不超过600V的复印机械及相关办公事务设备安全保护的基本技术要求和检验方法。 本标准适用于静电复印机、工程图纸复印机、小胶印机、重氮复印机（晒图机）、光电誉影机、制版印刷一体化（油印）速印机、激光印字机、传真复印机、电子书写板、绘图机以及与图文硬拷贝文件相差的其它办公事务设备，如装订机、分页机、裁切机、折页机、碎纸机、打孔机等文件修整和整理设备等。 本标准所列举的设备并未包括所有的设备，凡与图像文字处理、复制相关的各种设备均可使用。 本标准规定的一系列技术要求是为了保证可能与设备接触的人员安全及避免财产损失，当特别指明时，还应包括设备维修人员的安全。 本标准旨在保证设备按照制造厂方所规定的方法进行安装、操作和维修时的安全，而不包括设备性能或功能特性的要求。

Safety protection of copying machinery (including other office equipment)

JB/T 8625-1997 电除尘器 摆动接触式料位控制器

本标准规定了电除尘器摆动接触式料位控制器的结构形式、连接方式、基本参数、型号、技术要求、试验方法、检验规则以及标志、包装、贮存。 本标准适用于自动控制电除尘器灰斗定量卸灰的摆动接触式料位控制器。 本标准也适用于料位控制开关和转动式料位控制器。

Electrostatic precipitator swing contact material level controller

JB/T 8615-1997 静电复印绝缘型磁性干式单组份正电性显影剂技术条件

本标准规定了静电复印绝缘型磁性干式单组份正电性显影剂的技术要求、试验方法、检验规则及标志、包装、运输、储存。 本标准适用于采用有机光导体（OPC）感光鼓、热辊定影的普通纸静电复印机使用的绝缘型磁性干式单组份正电性显影剂。

Specifications of insulative magnetic dry monocomponent electropositive developer for electrostatic copying process

JB/T 8614-1997 办公机械静电制版机

本标准规定了办公机械静电制版机产品的分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于采用氧化锌纸基版静电制版的直接法静电制版机，其它类型的制版机可参照采用。

Office equipment electrostatic plate making machine

ASTM F1434-97 静电复印机和打印机中保险丝油性能评定

1.1 This practice covers a procedure for estimating the performance of fuser oil in an electrostatic copier or printer. 1.2 This practice describes a procedure for determining fuser oil-related changes in the print quality measured during testing at specific intervals. 1.3 Properties evaluated for all systems include odor emission, paper jam rate, paper wrap rate, paper crinkle rate, and fuser roller life. 1.4 Properties evaluated for recirculating systems include changes in viscosity, volatile matter content, and surface tension. 1.5 This practice describes a procedure for comparing the performance of a subject fuser oil with that of a control fuser oil. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific precautionary statement, see 8.3.1.

Standard Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer

ASTM F995-97(2001) 应用两种成分干影剂评价复印机调色剂的试验方法

1.1 This practice describes a procedure for estimating the number of copies that can be produced for a given unit of toner in a copier using dry two-component developer. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section 9 for specific precautionary statements.

Standard Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer

ASTM F995-97 应用两种成分干影剂评价复印机调色剂的试验方法

1.1 This practice describes a procedure for estimating the number of copies that can be produced for a given unit of toner in a copier using dry two-component developer. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section 9 for specific precautionary statements.

Standard Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer

ASTM F1434-97(2008) 静电复印机和打印机中保险丝油性能评定的标准实施规程

This practice can be used to evaluate the performance of different fuser oils in a specific model copier or printer. This practice can be used to evaluate a subject fuser oil in comparison to an acceptable control fuser oil. This practice can be used to estimate the consumption of a specific fuser oil in a copier or printer. This practice can be used with recirculating systems to monitor the change in volatile matter content as the test progresses. An excessive increase in volatile matter content can indicate breakdown of the fuser oil due to the combined effect of the heat of the fuser unit and the catalytic action of contaminants introduced by toner, paper, and other materials encountered in the machine. The production of excessive amounts of volatile materials may damage delicate electrical components within some copying machines. This practice can be used with recirculating systems to monitor the change in viscosity as the test progresses. An excessive increase in the viscosity of a fuser oil can indicate that it is beginning to form a gel due to the effect of oxygen, contaminants, and high temperatures encountered in the machine. This practice can be used with recirculating systems to monitor the change in surface tension as the test progresses. An increase in surface tension indicates loss of the release properties of the fuser oil and may lead to print offsetting and other adverse effects. This practice can be used to evaluate the rate of fuser oil-related buildup on the fuser roll. A rubbery material that consists of gelled fuser oil, paper dust, toner, and other contaminants may build up on the fuser roll as the fuser oil degrades. Inspection of the fuser roll at specific intervals provides a qualitative evaluation of this effect. This practice can be used to determine changes in measured print quality, odor emission, paper jam rate, paper wrap rate, paper crinkle rate, and fuser roller life during the test. This practice is a single estimate subject to a significant number of variables that are not measured easily. Consequently, a repeated number of tests on more than one machine will yield more reliable conclusions. This practice may be used with recirculating systems to establish limits for acceptable change in physical properties based on data correlations. Such limits may provide more efficient evaluation of sample fuser oils and prevent damage to the copying machine by avoiding the need to test to failure.1.1 This practice covers a procedure for estimating the performance of fuser oil in an electrostatic copier or printer. 1.2 This practice describes a procedure for determining fuser oil-related changes in the print quality measured during testing at specific intervals. 1.3 Properties evaluated for all systems include odor emission, paper jam rate, paper wrap rate, paper crinkle rate, and fuser roller life. 1.4 Properties evaluated for recirculating systems include changes in viscosity, volatile matter content, and surface tension. 1.5 This practice describes a procedure for comparing the performance of a subject fuser oil with that of a control fuser oil. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific precautionary statement, see 8.3.1.

Standard Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer

ASTM F1434-97(2002) 静电复印机和打印机中保险丝油性能评定

1.1 This practice covers a procedure for estimating the performance of fuser oil in an electrostatic copier or printer. 1.2 This practice describes a procedure for determining fuser oil-related changes in the print quality measured during testing at specific intervals. 1.3 Properties evaluated for all systems include odor emission, paper jam rate, paper wrap rate, paper crinkle rate, and fuser roller life. 1.4 Properties evaluated for recirculating systems include changes in viscosity, volatile matter content, and surface tension. 1.5 This practice describes a procedure for comparing the performance of a subject fuser oil with that of a control fuser oil. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific precautionary statement, see 8.3.1.

Standard Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer

ASTM F995-97(2001)e1 应用两种成分干影剂评价复印机调色剂的试验方法

1.1 This practice describes a procedure for estimating the number of copies that can be produced for a given unit of toner in a copier using dry two-component developer.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section for specific precautionary statements.

Standard Practice for Estimating Toner Usage in Copiers Utilizing Dry Two-Component Developer

ANSI/ISO/IEC 11159:1996 信息技术.办公设备.说明书中包含的最少量信息.被INCITS采用的复印机.修订版和再版:03/01/1997

This International Standard is intended to facilitate the users in selecting a copying machine which meets their requirements. It applies to copying machines that could be operated in an office environment. Copying machines requiring specially equipped rooms or specially instructed operators are not considered in this International Standard.

Information technology - Office equipment - Minimum information to be included in specification sheets - Copying machines Adopted by INCITS; Corrected and Reprinted: 03/01/1997

ISO/IEC 11159:1996 信息技术 办公设备 规格张中含有的最少信息 复印机

Specifies the minimum information that shall be included in the specification sheets of copying machines and defines tests to verify these specifications. Is intended to facilitate the users in selecting a copying machine.

Information technology - Office equipment - Minimum information to be included in specification sheets - Copying machines

JB/T 8391-1996 重氮复印机玻璃滚筒

本标准规定了复氮复印机玻璃筒的技术要求、试验方法、检验规则及标志、包装、运输、贮存。适用于JB/T 6157-1992规定的重氮复印机用的滚筒。

Diazo copier glass roller

JB/T 8392-1996 静电复印干式色调剂熔融指数测量方法

本标准规定了静电复印干式色调剂（包括静电复印干式单组份显影剂和双份显影济用色调剂，均简称为色调剂）熔融指数的测量方法，适用于色调剂成品和粗品。

Xerographic dry toners melt index measurement

AIIM TR16-1996 缩微阅读器-打印机的产品规格说明书

This recommended practice describes operational and quality control guidelines for alphanumeric computeroutput microfilm recorders and microforms using black-and -white film as well as duplicates made from such filmes.

Content of Product Specification Sheets for Microform Readers and Reader-Printers

AIIM MS14-1996 16mm与35mm缩微胶片防光片盘与片盘.技术规范

This recommended practice describes operational and quality control guidelines for alphanumeric computeroutput microfilm recorders and microforms using black-and -white film as well as duplicates made from such filmes.

Recommended Practice - Specifications for 16mm and 35mm Roll Microfilm

AIIM MS1-1996 检验和质量控制字母与计算机输出缩微业务实施规程

This recommended practice describes operational and quality control guidelines for alphanumeric computeroutput microfilm recorders and microforms using black-and -white film as well as duplicates made from such filmes.

Recommended Practice for Alphanumeric Computer-Output Microforms-Operational Practices for Inspection and Quality Control

ASTM F974-96 黑白静电复印机的上色度的测试方法

1.1 This practice covers the determination of the color response of an electrostatic copy system, black and white output.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determination of the Color Response of an Electrostatic Copying System, Black and White Output

ASTM F1621-96 测定表面扫描检验系统(SSIS)的定位精度能力的标准规程

This standard was transferred to SEMI (www.semi.org) May 20031.1 This practice covers the determination of the accuracy with which a scanning surface inspection system (SSIS) reports the positions of localized light scatterers on a silicon wafer surface. Note 1-This practice was developed primarily for use with laser-based SSISs. Although it may also be applicable for determining the positional accuracy capabilities of other types of SSISs, the conditions for which this extension of the practice might be valid have not been determined. 1.2 This practice includes procedures to separate the influences of wafer handling and wafer orientation on the precision and bias of the positions reported. 1.3 The procedure must be carried out on an SSIS that is located in a Class M2.5 (Class 10) or better environment as defined in Federal Standard 209E. 1.4 This practice relies on a fabricated silicon reference wafer that contains a prescribed pattern of multiple etched feature fields on its polished (front) surface. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Positional Accuracy Capabilities of a Scanning Surface Inspection System