N64 实验室用玻璃、陶瓷、塑料器皿 标准查询与下载

SANS 111:2009 实验室玻璃仪器．刻度移液管

Specifies metrological and constructional requirements for graduated pipettes,adequate for general laboratory purposes.

Laboratory glassware - Graduated pipettes

SANS 4788:2009 实验室玻璃仪器．刻度量筒

Specifies dimensions, material and constructional and metrological requirements of graduated measuring cylinders of tall form (Type 1a and Type 1b) and of squat form (Type 2). All types are suitable for general laboratory use.

Laboratory glassware - Graduated measuring cylinders

SANS 115:2009 实验室玻璃仪器．滴定管

Provides metrological and constructional requirements for an internationally acceptable series of burettes, suitable for general laboratory purposes

Laboratory glassware - Burettes

JJG(交通) 092-2009 李氏密度瓶

本规程适用于李氏密度瓶(以下简称李氏瓶)的首次检定、后续检定和使用中检验。

Le Chatelier Flask for Determination Density of Hydraulic Cement

SANS 1840:2009 量瓶的生产

Applies to containers, commonly called measuring container bottles, made of glass, or of any other material that is rigid and stable enough to give metrological results that are as good as those obtained with glass containers, that are stoppered, that ar

Manufacture of measuring container bottles

NF B35-904*NF EN ISO 24998:2009 塑料实验室器皿.微生物过程用单用途皮氏培养皿

Plastics laboratory ware - Single-use Petri dishes for microbiological procedures.

DIN EN ISO 24998:2009 塑料实验室器皿 微生物过程用单用途皮氏培养皿

This International Standard specifies requirements and test methods for plain, single-use Petri dishes for microbiological use. This International Standard does not apply to products of similar design which may be used for cell or tissue culture purposes. Neither does it apply to dishes supplied ready loaded with microbiological media. NOTE Petri dishes are used for microbiological routine purposes in very large numbers and consequently, are often handled by robotic equipment. Users of such equipment should satisfy themselves that the Petri dishes of any given manufacturer are suitable for use with such equipment and, if obtained from several sources, are compatible if mixed.

Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); English version of DIN EN ISO 24998:2009-03

DIN EN ISO 648:2009 实验室玻璃器皿.单一容量吸液管

This International Standard specifies metrological and constructional requirements for volumetric pipettes with one mark (total delivery) and for volumetric pipettes with two marks, both of which are adequate for general laboratory purposes. The details specified are in conformity with the principles of design and construction of volumetric glassware given in ISO 384. NOTE For graduated pipettes, see ISO 835. For piston-operated pipettes, see ISO 8655-2.

Laboratory glassware - Single-volume pipettes (ISO 648:2008); English version of DIN EN ISO 648:2009-01

BS EN ISO 648:2008 实验室玻璃器具.单一容量吸液管

This International Standard specifies metrological and constructional requirements for volumetric pipettes with one mark (total delivery) and for volumetric pipettes with two marks, both of which are adequate for general laboratory purposes. The details specified are in conformity with the principles of design and construction of volumetric glassware given in ISO 384. NOTE For graduated pipettes, see ISO 835. For piston-operated pipettes, see ISO 8655-2.

Laboratory glassware - Single-volume pipettes(ISO 648:2008)

NF B35-306*NF EN ISO 835:2007 实验室玻璃器皿.刻度吸量管

Laboratory glassware - Graduated pipettes.

DIN EN ISO 835:2007 实验室玻璃器皿.刻度吸量管

This International Standard specifies metrological and constructional requirements for graduated pipettes, adequate for general laboratory purposes. The details specified are in conformity with the principles of design and construction of volumetric glassware given in ISO 384. NOTE For one-mark pipettes, see ISO 648. For piston-operated pipettes, see ISO 8655-2.

Laboratory glassware - Graduated pipettes (ISO 835:2007); English version of DIN EN ISO 835:2007-08

DIN ISO 12772:2007 实验室玻璃器皿.可处置微血球容量计毛细管

This International Standard provides details for two types of disposable glass capillary tubes,suitable for the microhaematocrit test and other analytical tests which include a separation of plasma and cells.The details specified are in conformity with ISO 8417,to the greatest possible extent.

Laboratory glassware - Disposable microhaematocrit capillary tubes (ISO 12772:1997)；English version of DIN ISO 12772:2007-06

BS EN ISO 835:2007 实验室玻璃器皿.刻度移液管

This International Standard specifies metrological and constructional requirements for graduated pipettes, adequate for general laboratory purposes. The details specified are in conformity with the principles of design and construction of volumetric glassware given in ISO 384. NOTE For one-mark pipettes, see ISO 648. For piston-operated pipettes, see ISO 8655-2.

Laboratory glassware - Graduated pipettes

ISO 835:2007 实验室玻璃器皿.分度吸量管

This International Standard specifies metrological and constructional requirements for graduated pipettes, adequate for general laboratory purposes. The details specified are in conformity with the principles of design and construction of volumetric glassware given in ISO 384. NOTE For one-mark pipettes, see ISO 648. For piston-operated pipettes, see ISO 8655-2.

Laboratory glassware - Graduated pipettes

JIS R 3503 AMD 1:2007 化学分析用玻璃仪器(修改件1)

JIS R 3503:1994を,次のように改正する。

Glass apparatus for chemical analysis (Amendment 1)

KS B ISO 7713:2006 实验室玻璃器皿.一次性血清吸量管

이 규격은 배출에 조절되는 일회용 유리제 혈청 피펫의 일반적인 실험실 목적의 요구 사항

Laboratory glassware－Disposable serological pipettes

KS B ISO 7550:2006 实验室玻璃器皿.一次性微量吸量管

이 규격은 일반적인 실험실 목적에 적합한 일회용 유리제 마이크로 피펫의 조정 요구 사항

Laboratory glassware－Disposable micropipettes

KS B ISO 7712:2006 实验室玻璃器皿.一次性巴斯德吸量管

이 규격은 유리제 일회용 파스테르(Pasteur) 피펫의 일반적 사용 크기의 요건을 대부분

Laboratory glassware－Disposable Pasteur pipettes

KS B ISO 4142:2006 实验室玻璃器皿.试管

이 규격은 붕규산염, 중성 또는 소다/석회 유리제로 만들어진 일반 실험실에서 사용하기에

Laboratory glassware-Test tubes

KS B ISO 4785:2006 实验室玻璃器皿.通用直孔玻璃活栓

이 규격은 유리제 일반용의 유리제 일방 콕의 2계열의 치수와 요건을 규정한다. 멈춤 콕은

Laboratory glassware－Straight-bore glass stopcocks for general purposes