共找到 97 条与 超声波与声放射探伤仪器 相关的标准,共 7 页
Non-destructive testing instrument specimens Part 4: Specimens for magnetic particle testing
Non-destructive testing instrument specimens Part 3: Electromagnetic (eddy current) testing specimens
Non-destructive testing instrument ultrasonic automatic testing system
本标准规定了声扫频检测仪的术语和定义、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于声扫频检测仪(以下简称检测仪)。
Nondestructive testing instruments.Swept frequency acoustical testing instrument
本标准规定了多通道数字超声检测仪(以下简称超声检测仪)的术语和定义、技术要求、检验方法、检验规则、标志、包装、运输和贮存等内容。 本标准适用于多通道数字超声检测仪。
Non-destructive testing instruments.Multi-channel digital ultrasonic testing instrument
本标准规定了超声波法局部放电测试仪(以下简称测试仪)的技术要求、试验方法、检验规则和标志、包装、运输、贮存以及供货成套型等要求。 本标准适用于超声波法局部放电测试仪的制造和检测。
General technical specifications for ultrasonic based partial discharge tester
Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams
本标准规定了阵列涡流检测仪(以下简称仪器)的术语和定义、功能参数和检验方法。 本标准适用于阵列涡流检测仪。
Non-destructive testing instrument.Characterization and verification of array eddy current testing instrument
La présente Norme européenne traite des traducteurs multiéléments linéaires utilisés pour les essais non destructifs par ultrasons - selon la technique par contact (avec ou sans sabot) ou selon la technique par immersion - ayant une fréquence centrale comprise entre 0,5 MHz et 10 MHz.La présente Norme européenne spécifie les essais de caractérisation qui doivent être effectués à l'issue de la fabrication d'un traducteur multiélément. Il définit à la fois la méthodologie et les critères d'acceptation.Le présent document ne décrit pas les méthodes et critères d'acceptation permettant de caractériser les performances d'un appareillage de contrôle multiélément
Non destructive testing - Characterisation and verification of ultrasonic phased array equipment - Part 2 : probes
Ultrasonics -Field characterization - Specification and measurement of field parameters for High Intensity Therapeutic Ultrasound (HITU) transducers and systems
Non-destructive testing. Ultrasonic testing. Transmission technique
Non-destructive testing. Ultrasonic testing. Sensitivity and range setting
Non-destructive testing. Ultrasonic testing. General principles
Non-destructive testing. Ultrasonic testing. Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
This Standard specifies the automatic or manual ultrasonic examination on the welds of carbon steel pipes and ferritic alloy steel pipes (hereafter,referred to as "steel pipes") whose internal and external surfaces are arc welded automatically in longitudinal direction or in spiral state,and which are 350 mm or over in outside diameter and 6 mm or over in wall thickness.Usually,this is applicable to the examination of flaws oriented parallel to the weld line.
Ultrasonic examination for arc welded steel pipes
本规范适用于采用超声波衍射时差法(time-of-flight diffraction,TOFD)原理的超声探伤仪(以下简称探伤仪)的校准。
Calibration Specification for Ultrasonic Flaw Detectors by Time-of-Flight Diffraction
Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
本标准规定了数字式声振检测仪(以下简称声振仪)的要求、试验方法、检验规则和标志、包装、运输和贮存等内容。本标准适用于数字式声振检测仪。
Non-destructive testing instrument.Acoustic impact testing instrument
Non-destructive testing. Equipment for eddy current examination. Instrument characteristics and verification
JB/T 11603的本部分规定了单通道或多通道声发射设备性能的常规验证方法。本部分适用于单通道或多通道声发射设备。
Non-destructive testing instruments.Acoustic emission.Equipment characterization.Part 2: Verification of operating characteristic
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号