P25 混凝土结构工程 标准查询与下载
共找到 635 条与 混凝土结构工程 相关的标准，共 43 页
Prestressed concrete box girder bridge web vertical prestressed finish rolled thread steel tension testing rules
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-12-23
- 实施
- 2014-01-01
Technical specification for low-rise autoclaved aerated concrete load-bearing buildings
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-11-01
- 实施
- 2014-02-01
Regulations for construction and quality acceptance of prefabricated concrete structures
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-11-01
- 实施
- 2014-02-01
本规范规定了石油化工钢筋混凝土水池的材料、荷载、计算及构造的要求。本规范适用于石油化工现浇钢筋混凝土水池、非贮液池及地下式、半地下式泵房的结构设计。本规范不适用于装配式钢筋混凝土水池、预应力混凝土水池及沉井类结构设计。本规范不涉及水池地基处理,当需要进行地基处理时,应符合国家现行有关地基处理技术规范的规定。
Design specification for reinforced concrete tanks in petrochemical industry
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-10-17
- 实施
- 2014-03-01
本规程适用于非地震区和抗震设防烈度为6度至8度地震区的约束混凝土柱组合梁框架结构。本规程不适用于异形柱框架结构体系。
Technical specification for frame structure of confined RC columns and composite beams
- ICS
- CCS
- P25
- 发布
- 2013-09-01
- 实施
- 2013-09-01
Code for design of prefabricated shear wall structures
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-07-24
- 实施
- 2014-02-01
Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures - Application rules for DIN EN 13670, Corrigendum to DIN 1045-3:2012-03
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-07
- 实施
本规程适用于混凝土结构工程中采用液压滑动模板施工的安全技术与管理。
Technical specification for safety of the hydraulic slipform in construction
- ICS
- CCS
- P25
- 发布
- 2013-06-24
- 实施
- 2014-01-01
本规程适用于建筑工程施工中额定起重力矩400kN·m~3000kN·m的固定式塔式起重机装配式混凝土基础(简称装配式塔机基础)的设计、构件制作、装配与拆卸、检查与验收。
Technical specification for concrete foundation engineering of large tower cranes
- ICS
- CCS
- P25
- 发布
- 2013-06-24
- 实施
- 2014-01-01
本规程适用于采用回弹法进行砌筑砂浆抗压强度的检测。
Technical specification for testing the compressive strength of masonry mortar by rebound method
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-06-13
- 实施
- 2013-07-10
本规程适用于采用钻芯法进行结构混凝土抗压强度的检测。当需检测构件较多时，采用回弹法、超声回弹综合法、后装拔出法等与钻芯法综合检测，形成钻芯修正法，用钻芯法检测结果对其它检测方法测得结果进行修正，使检测结果更可靠，可减少对结构损害。
Technical specification for testing the compressive strength of concrete by core drilling method
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-06-13
- 实施
- 2013-07-10
This International Standard can be used as an alternative to the development of a building code, or equivalent document in countries where no national design codes are available by themselves, or as an alternative to the building code in countries where specifically considered and accepted by the national standards body or other appropriate regulatory organization, and applies to the assessment of earthquake resistance capability and to the seismic rehabilitation design and construction for existing structural concrete buildings.
Guidelines for simplified seismic assessment and rehabilitation of concrete buildings
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-06-01
- 实施
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection; German version EN 1504-5:2013
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-06
- 实施
本标准规定了钢筋连接用套筒灌浆料的术语和定义、材料、要求、试验方法、检验规则、交货与验收、包装、标识、运输和贮存。本标准适用于带肋钢筋套筒灌浆连接所使用的水泥基灌浆材料。
Cementitious grout for coupler of rebar splicing
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-05-24
- 实施
- 2013-10-01
Construction technical specification for cast-in-place plastic concrete anti-seepage core wall
- ICS
- CCS
- P25
- 发布
- 2013-05-01
- 实施
- 2013-05-01
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Concrete injection
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-04-30
- 实施
- 2013-04-30
本标准规定了钢筋机械连接用套筒的术语和定义、分类、型式与标记、要求、试验方法、检验规则、标志、包装、运输及贮存。本标准适用于混凝土结构中钢筋机械连接用直螺纹套筒、锥螺纹套筒和挤压套筒。本标准所述套筒适用于连接符合GB 1499.2及GB 13014规定的直径为12 mm~50 mm的各类钢筋,用于连接光圆钢筋、不锈钢钢筋及国外钢筋时可参考应用。
Couplers for rebar mechanical splicing
- ICS
- 93.020
- CCS
- P25
- 发布
- 2013-04-27
- 实施
- 2013-10-01
This European Standard specifies requirements and conformity criteria for the identification, performance (including durability aspects) and safety of injection products for the repair and protection of concrete structures, used for: force transmitting filling of cracks, voids and interstices in concrete (category F, see 3.1); ductile filling of cracks, voids and interstices in concrete (category D, see 3.1); swelling fitted filling of cracks, voids and interstices in concrete (category S, see 3.1). The performance requirements in this part of this document may not be applicable to highly specialised applications in extreme environmental conditions, e. g. cryogenic use, nor do they cover specialised circumstances such as accidental impact, e. g. due to traffic or ice, or earthquake loading, where specific performance requirements will apply. This European Standard does not cover: the treatment of cracks by widening them and sealing them with an elastomeric sealing compound; external filling of cavities, that is, the placement of product outside the structure (generally within the surrounding foundation soils, or at the interface between the structure and the soil); this is covered by EN 12715 [2], under contact grouting; preliminary injection works, if necessary, to temporarily stop water passage during waterproofing injection.
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
- ICS
- 91.080.40
- CCS
- P25
- 发布
- 2013-04-01
- 实施
- 2013-04-01
National Annex - Nationally determined parameters - Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
- ICS
- 91.010.30;91.080.40
- CCS
- P25
- 发布
- 2013-04
- 实施
National Annex - Nationally determined parameters - Eurocode 2: Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules
- ICS
- 91.010.30;91.080.40;93.040
- CCS
- P25
- 发布
- 2013-04
- 实施
