P65 铁路工程 标准查询与下载

CJJ/T 198-2013 城市轨道交通接触轨供电系统技术规范

本规范适用于列车运行速度不大于120km/h,供电电压直流750V或直流1500V的城市轨道交通接触轨供电系统的设计、施工、验收和检修维护。

Technical code for contact rail power supply system of urban rail transit

CJJ 201-2013 直线电机轨道交通施工及验收规范

本规范适用于直线电机轨道交通工程新建、扩建和改建工程的施工及质量验收。

Code for construction and acceptance of linear motor for urban rail transit

CJJ/T 202-2013 城市轨道交通结构安全保护技术规范

本规范适用于已建成和正在修建的城市轨道交通结构的安全保护。

Technical code for protection structures of urban rail transit

DIN EN 13231-1:2013 轨道交通.轨道.作业验收.第1部分:有碴轨道的作业.平原线 、铁路侧线和道岔口.德文版本EN 13231-1-2013

Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings; German version EN 13231-1:2013

DB11/ 995-2013 城市轨道交通工程设计规范

Design Code for Urban Rail Transit Engineering

EN 15273-1:2013 铁路应用设施.仪表.第1部分:基础设施和车辆的一般规则

This European Standard is applicable to authorities involved in railway operation and may also be applied for light vehicles (e. g. trams, metros, etc. running on two rails) and their associated infrastructure, but not for systems such as rail-guided buses. It allows rolling stock and infrastructures to be dimensioned and their compliance to be checked relative to applicable gauging rules. For rolling stock and infrastructure, this standard is applicable to new designs, to modifications and to the checking of vehicles and infrastructures already in use. This document EN 15273-1 covers: the general principles; the various elements and phenomena affecting the determination of gauges; the various calculation methods applicable to the elements shared by the infrastructure and by the rolling stock; the sharing rules for elements taken into account in calculations specific to the infrastructure and to the rolling stock; a catalogue of European gauges. This document does not cover: conditions to be met to ensure safety of passengers on platforms and of persons required to walk along the tracks; conditions to be met by the fixed equipment maintenance machines in active position; the space to be cleared for the running track of rubber-tyred metros and other vehicles; rules applicable to extraordinary transportation, however some formulae may be used; rules applicable to the design of the overhead contact line system; rules applicable to the design of the current collection system on a third rail; simulation methods for the running of vehicles, however, it does not confirm the validity of existing simulations; verification rules of wagon loadings; coding methods for combined transportation; infrastructure gauges for very small curve radii (e. g. R < 150 m for gauge G1).

Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock (Incorporates Amendment A1: 2016)

EN 15273-2:2013 铁路应用设施.仪表.第2部分:车辆仪表

This document is applicable to the authorities involved in all types of railway operation. This European Standard is applicable to new vehicle designs, to modifications and to the checking of the gauge for vehicles already in use. The application of the rules of this European Standard makes it possible to determine the maximum dimensions of vehicles related to the structures. This European Standard contains: the associated rules for all the gauges for rolling stock; the requirements for composing the technical gauge report to submit to the Acceptance Authority in order to confirm vehicle conformity to this standard; the requirements for maintaining the vehicle characteristics influencing gauging throughout its operational life.

Railway applications - Gauges - Part 2: Rolling stock gauge (Incorporates Amendment A1: 2017)

EN 15273-3:2013 铁路应用设施.仪表.第3部分:结构仪表

This standard: defines the various profiles needed to install, verify and maintain the various structures near the structure gauge; lists the various phenomena to be taken into account to determine the structure gauge; defines a methodology that may be used to calculate the various profiles from these phenomena; lists the rules to determine the distance between the track centres; lists the rules to be complied with when building the platforms; lists the rules to determine the pantograph gauge; lists the formulae needed to calculate the structure gauges in the catalogue. The defined gauge includes the space to be gauged and maintained to allow the running of rolling stock, and the rules for calculation and verification intended for sizing the rolling stock to run on one or several infrastructures without interference risk. This standard defines methodologies to demonstrate gauge compatibility between infrastructure and rolling stock. This standard defines the responsibilities of the following parties: a) for the infrastructure: 1) gauge clearance; 2) maintenance; 3) infrastructure monitoring. b) for the rolling stock: 1) compliance of the operating rolling stock with the gauge concerned; 2) maintenance of this compliance over time. The gauges included in these standards have been developed as part of their application on European railways. Other networks such as regional, local, urban and suburban networks may apply the gauge regulations defined in this standard. They may be required to make use of specific methodologies, particularly where: specific rolling stock is used (for example: underground trains, trams, etc. operating on two rails); use occurs in other ranges of radii; others, etc. The catalogue included in this standard only includes a selection of gauges and is not exhaustive. Each network is free to define the gauges in accordance with their own needs. 11 15273-3:2013 (E)

Railway applications - Gauges - Part 3: Structure gauges (Incorporates Amendment A1: 2016)

EN 13231-1:2013 铁路应用设施.轨道.作业验收.第1部分:有碴轨道的作业.平原线,铁路侧线和道岔口

This European Standard specifies the minimum technical requirements and the tolerances for the acceptance of works on ballasted track situated on plain line and on switches and crossings and rail expansion devices, as part of the track, for 1435 mm and wider track gauge railways, concerning construction of new track, track renewal and track maintenance. More particularly, this standard gives the requirements for the documentation of work parameters, for the tolerances for relative track geometry and absolute track position and for the acceptance procedures. This standard does not deal with contractual and legal aspects and it does not cover either works related to reprofiling the railhead nor the associated measurements, except for some measurements related to safety, since these works are covered by other parts of EN 13231 series. Related works, e. g. platform reconstruction, formation, drainage, level crossings are not covered by this standard.

Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line@ switches and crossings

EN 13231-4:2013 铁路应用设施.轨道.工程验收.第4部分:重新装修的铁路侧线和道岔口铁轨的验收

This European Standard lays down the technical requirements and the measurements to be made for the acceptance of work for reprofiling longitudinally and/or transversely the heads of railway rails in switches, crossings and expansion devices. For acceptance purposes two classes of longitudinal profile and three classes of transverse profile tolerance are defined. It applies to reprofiled vignole railway rails and associated switch rails 46 kg/m and above.

Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings

TB 10015-2012 铁路无缝线路设计规范

本规范适用于铁路网中标准轨距铁路无缝线路设计。重载铁路无缝线路设计应另行研究确定。

Code for Design of Railway Continuous Welded Rail

TB 10761-2013 高速铁路工程动态验收技术规范

本规范适用于新建高速铁路工程动态验收。其他专门用于旅客运输的新建铁路工程动态验收按照执行。

Technical regulations for dynamic acceptance for high-speed railways construction

TB 10760-2013 高速铁路工程静态验收技术规范

本规范适用于新建高速铁路工程静态验收,其他专门用于旅客运输的铁路工程静态验收按照执行。

Technical regulations for static acceptance for high-speed railways construction

TB 10079-2013 铁路污水处理工程设计规范

本规范适用于新建、改建铁路污水处理工程和地面卸污设施工程设计。

Code for Design of Wastewater Treatment of Railway

DB11/T 915-2012 穿越城市轨道交通设施检测评估及监测技术规范

Technical specifications for inspection, evaluation and monitoring of cross-urban rail transit facilities

TB 10428-2012 铁路声屏障工程施工质量验收标准

本标准适用于铁路声屏障工程施工质量的验收。

Standard for Constructional Quality Acceptance of Railway Sound Barrier

TB/T 3278-2011 铁道交通 可靠性、可用性、可维修性和安全性规范及示例 GB/T 21562中机车车辆RAM的应用指南

Guidelines for the application of rolling stock RAM in GB/T 21562 for railway traffic reliability, availability, maintainability and safety specifications and examples

TB 10038-2012 铁路工程特殊岩土勘察规程

为统一铁路工程特殊岩土勘察的技术要求，保障勘察质量，制定本规程。本规程适用于新建，改建铁路勘察设计，施工和运营阶段的特殊岩土勘察工作。

Code for Special Soil and Rock Investigation of Railway Engineering

TB 10014-2012 铁路工程地质钻探规程

本规程适用于铁路工程地质、水文地质钻探及物探测井、孔内测试钻孔的钻探工作。

Code for Geological Drilling of Railway Engineering

TB 10027-2012 铁路工程不良地质勘察规程

本规程适用于新建、改建铁路勘测设计、施工和运营阶段的不良地质勘察工作。

Code for Unfavorable Geological Condition Investigation of Railway Engineering