P96 作业设备与仪器仪表 标准查询与下载

JT/T 777-2010 路面制动式摩擦系数自动测试系统

本标准规定了路面制动式摩擦系数自动测试系统的工作原理、分类与系统组成、技术要求、试验方法、检验规则及标志、包装、运输、储存等内容。 本标准适用于现场测试路面抗滑性能的制动式测试系统的生产、检验和使用。

Automatic testing system of road braking friction coefficient

JT/T 778-2010 双轮式横向力摩擦系数自动测试系统

本标准规定了双轮式横向力摩擦系数自动测试系统的工作原理与系统组成、工作环境条件、技术要求、试验方法、检验规则及标志、包装、运输、储存等内容。 本标准适用于现场测试路面抗滑性能的双轮式测试系统的生产、检验和使用。

Automatic testing system of twin-wheel sideway force coefficient

JIS A 8707:2010 穿孔机用安全要求

Safety requirements for drill rigs

ANSI/UL 1322b-2010 预制脚手架厚板材和阶梯安全性标准(提案日期 2010年5月11日)

Standard for Safety for Fabricated Scaffold Planks and Stages (Proposal dated 11/5/10)

ANSI/UL 1322-2010 装配式脚手架铺板和脚手架安全性标准(提案日期 2010年1月22日)

The following is being recirculated: Proposed item (d) of paragraph 1.1 is being deleted since requirements for fabricated tubular frame scaffolding will not be included in the standard and an editorial revision to new paragraph 3.3.1.1 is being proposed.

Standard for Safety for Fabricated Scaffold Planks and Stages (Proposals dated 1/22/10)

ASTM C490/C490M-10 硬化水泥浆,灰浆和混凝土长度变化测定用仪器使用的标准实施规程

This practice is intended to provide standard requirements for apparatus common to many test methods used in connection with cement and concrete and standardized procedures for its use. The detailed requirements as to materials, mixtures, specimens, conditioning of specimens, number of specimens, ages at which measurements are to be made, interpretation of results, and precision and bias are left to be dealt with in specific test methods. 1.1 This practice covers the requirements for the apparatus and equipment used to prepare specimens for the determination of length change in hardened cement paste, mortar, and concrete, the apparatus and equipment used for the determination of these length changes, and the procedures for its use. 1.2 Methods for the preparation and curing of test specimens, conditions of testing and curing, and detailed procedures for calculating and reporting test results are contained in applicable test methods. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete

ANSI/UL 1322a-2010 预制脚手架厚板材和阶梯安全性标准(提案日期 2010年1月22日)

Standard for Safety for Fabricated Scaffold Planks and Stages (Proposals dated 1/22/10)

ANSI A14.8-2010 梯子附件的安全性要求

Safety Requirements for Ladder Accessories

NF P93-352:2009 施工设备.专用可移动平台.说明书、试验和控制

Building site equipment - Individual mobil platform - Specifications, testing and control.

NF P93-353:2009 建筑施工现场设备.专用可移动轻便平台.规范,试验和控制

Building site equipment - Individual mobil light platform - Specifications, testing and control.

KS F 8006-2009 混凝土模板用钢架胶合板

이 표준은 콘크리트 거푸집용 합판 및 강제 보강재로 구성된 강제 틀 합판 거푸집(이하 거푸

Steel framed plywood form

KS F 8023-2009 形状操作带

콘크리트 구조물 공사시 거푸집 널의 간격을 유지하고 콘크리트 측압을 지지하는 인장 부재인

Formwork ties

KS F 8012-2009 作业平台

이 표준은 건설 공사 현장에서 근로자의 작업과 이동을 위해 사용되는 통로용 작업 발판, 작

Working platform

JGJ/T 194-2009 钢管满堂支架预压技术规程　

本规程适用于建筑与市政工程中搭设钢管满堂支架现浇混凝土工程施工的支架基础与支架的预压。

Technical specification for preloading in full scaffold construction

BS 1139-2.2:2009+A1:2015 金属脚手架. 第2部分: 耦合器和配件. 第2.2小节: BS EN 74范围之外的耦合器和配件. 要求和试验方法

Metal scaffolding – Part 2: Couplers and fittings – Section 2.2: Couplers and fittings outside the scope of BS EN 74– Requirements and test methods

BS 1139-2.2:2009 金属脚手架.第2部分:连接件.第2.2节:铝连接件和特殊钢连接件.试验方法和要求

This section of BS 1139-2 specifies requirements and test methods for aluminium alloy couplers and steel fittings for use in scaffolds and falsework constructed with scaffold tubes conforming to BS EN 39, types 3 and 4, or BS 1139-1.2. It is applicable to: • aluminium right-angle, swivel and sleeve couplers; • steel putlog couplers, expanding joint pins and reveal pins; • steel putlogs, putlog adapters and toe-board clips; and • aluminium or steel castors. NOTE Steel right-angle, swivel, sleeve and parallel couplers are covered by BS EN 74-1.

Metal scaffolding – Part 2: Couplers – Section 2.2: Aluminium couplers and special couplers in steel – Requirements and test methods

JG/T 262-2009 混凝土氯离子扩散系数测定仪

本标准规定了混凝土氯离子扩散系数(RCMD)测定仪(以下简称 RCM 测定仪)的分类与标记，组成、 使用条件和材料，要求，试验方法，检验规则，标志、包装，.运输和贮存等。 本标准适用于 RCM 测定仪的设计、生产和质量检验。

Concrete Chloride Ion Diffusion Coefficient Meter

JG/T 261-2009 混凝土氯离子电通量测定仪

本标准规定了混凝土氯离子电通量测定仪的分类与标记，组成，使用条件及材 料 ，要求，试验方法，检验规则，标志、包装、运输和贮存等。 本标准适用于电通量儀的設計、生產和质量檢驗。

Concrete Chloride Ion Flux Meter

JT/T 676-2009 车载式路面激光平整度仪

本标准规定了车载式路面激光平整度仪(以下简称激光平整度仪)的产品结构、技术要求、试验方法、检验规则、标志、包装、运输和储存等内容。 本标准适用于应用激光技术和计算机技术检测公路路面平整度状况的激光平整度仪的生产、检验和使用。

Vehicle bearing road laser profilometer

JT/T 677-2009 车载式路面激光车辙仪

本标准规定了车载式路面激光车辙仪(以下简称激光车辙仪)的分类与结构、技术要求、试验方法、检验规则、标志、包装、运输和储存等内容。 本标准适用于应用激光技术、数字成像技术和计算机技术检测公路路面车辙状况的激光车辙仪的生产、检验和使用。

Vehicle bearing road laser rut-meter