Q20 筑路材料 标准查询与下载
共找到 422 条与 筑路材料 相关的标准，共 29 页
This European Standard specifies fly ash bound granular mixtures for roads, airfields and other trafficked areas, and specifies the requirements for their constituents, composition and laboratory performance classification. In this European Standard, fly ash refers to siliceous or calcareous fly ash complying with EN 14227-4. Where fly ash is part of cement conforming to EN 197-1 or hydraulic road binder conforming to EN 13282-1 and EN 13282-2, then reference should be made to EN 14227-1 or EN 14227-5 respectively.
Hydraulically bound mixtures - Specifications - Part 3: Fly ash bound granular mixtures
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2013-05-01
- 实施
- 2013-05-01
This Standard specifies the iron and steel slag used for the base course and the hot laid asphalt mix of roads (hereafter referred to as "iron and steel slag for road construction").
Iron and steel slag for road construction
- ICS
- 91.100.15;93.080.20
- CCS
- Q20
- 发布
- 2013-03-21
- 实施
This European Standard specifies requirements for concrete pavements cast in situ and compacted by vibration. This European Standard also covers concrete sub-bases as well as concrete wearing courses on bridges. This European Standard covers concrete pavements in motorways, airfields, pedestrian streets, cycle tracks, storage areas and, in general, all traffic-bearing structures.
Concrete pavements - Part 2: Functional requirements for concrete pavements
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2013-03-01
- 实施
- 2013-03-01
This European Standard specifies the scheme for the evaluation of conformity of hydraulic road binders to their corresponding product specification standards EN 13282-1 and prEN 13282-2. This European Standard provides technical rules for factory production control by the manufacturer, including autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity.
Hydraulic road binders - Part 3: Conformity evaluation
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2013-03-01
- 实施
- 2013-03-01
This European Standard specifies requirements for: the constituents (concrete and other materials) of concrete pavements; the properties of fresh and hardened concrete. This European Standard is applicable to concrete pavements cast in situ. Concrete compacted by rollers is not covered by this European Standard. This European Standard covers concrete pavements for roads, motorways and airports, pedestrian footpaths, cycle tracks, storage areas, and in general all traffic-bearing structures.
Concrete pavements - Part 1: Materials
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2013-03-01
- 实施
- 2013-03-01
Kerbs of natural stone for external paving. Requirements and test methods
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2013-02-28
- 实施
- 2013-02-28
이 표준은 해양 공사용 케이슨의 속채움재로 사용되는 철강 슬래그 및 동 슬래그에 대하여 규
Slag for caisson filler
- ICS
- 47.020.05
- CCS
- Q20
- 发布
- 2013-02-28
- 实施
- 2013-02-28
This European Standard specifies test methods for the determination of the relationship between the water content and the dry density of hydraulically bound or unbound mixtures after compaction under specified test conditions using Proctor compaction. It allows an estimate of the mixture density that can be achieved on construction sites and provides a reference parameter for assessing the density of the compacted layer of the mixture.
Unbound and hydraulically bound mixtures.Part 2: Test methods for laboratory reference density and water content - Proctor compaction; German version EN 13286-2:2010 + AC:2012
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2013-02
- 实施
Bituminous mixtures - test methods for hot mix asphalt - Part 42: amount of foreign matter in reclaimed asphalt
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2013-01-26
- 实施
- 2013-01-26
This European Standard specifies the requirements of pavers and accessories manufactured from clay for use in the flexible form of construction (see 3.10) and in the rigid form of construction (see 3.11). This European Standard applies to rectangular and other shaped units intended as construction products in pavements mainly for exterior use, including roofs as roof paving units, but which may also be used internally. The flexible form of construction is subjected to pedestrian and vehicular traffic, while the rigid form of construction is usually subjected to pedestrian traffic. This European Standard specifies the characteristics and classes of performance and corresponding test methods. It provides for product marking and for the evaluation of conformity of the product to this European Standard. This European Standard covers only clay pavers and accessories with or without coatings and with or without post firing chemical treatment which do not contain any material with asbestos fibres nor contain formaldehyde. It excludes products intended for refractory and chemical engineering applications and clay floor tiles. It also excludes clay masonry units. This European standard does not cover clay pavers having tactile surfaces.
Clay pavers - Requirements and test methods
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2013
- 实施
- 2023-03-21
Technical specification for the application of steel slag sand for cement concrete pavement
- ICS
- CCS
- Q20
- 发布
- 2012-12-28
- 实施
- 2013-06-01
Unbound and hydraulically bound mixtures. Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2012-08-31
- 实施
- 2012-08-31
本规程适用于新建、扩建和改建城镇道路工程透水沥青路面的设计、施工、验收和养护。
Technical specification for permeable asphalt pavement
- ICS
- CCS
- Q20
- 发布
- 2012-08-23
- 实施
- 2012-12-01
Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling; German version EN 13286-47:2012
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2012-07
- 实施
本规范适用于各等级公路工程。
Technical Specification for Application of Geosynthetics in Highway
- ICS
- CCS
- Q20
- 发布
- 2012-06-05
- 实施
- 2012-08-01
Road marking materials - Laboratory methods for identification.
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2012-05-01
- 实施
- 2012-05-25
Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two; German version EN 1423:2012
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2012-04-01
- 实施
本标准规定了砂基透水砖的术语和定义、分类、规格和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于主要采用硅砂和有机粘结剂为原材料，经免烧结成型工艺制成，具有雨水渗透和过滤功能，使用在道路、广场、园林等场地的砂基透水砖。
Sand-based water permeable brike
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2012-04-01
- 实施
- 2012-08-01
Road marking materials. Drop on materials. Glass beads antiskid aggregates and mixtures of the two
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2012-02-29
- 实施
- 2012-02-29
This test method for measuring the electrical resistivity of water-barrier membrane-pavement systems may be interpreted to indicate the effectiveness of such systems. This test method is predicated on the fact that an electrical connection between the surface of the pavement and the reinforcing steel in the concrete pavement cannot be made through an impermeable water-barrier membrane. This test method may be used for acceptance when the accepting agency specifies the minimum resistance value desired.1.1 This test method covers the measurement of the electrical resistivity of water-barrier membrane-pavement systems when applied to concrete bridge decks. 1.2 Measurements shall be performed on the bituminous pavement surface covering the water-barrier membrane. 1.3 This test method utilizes a measure of electrical resistance between the saturated top surface of the water-barrier membrane and the reinforcing steel embedded in the concrete bridge deck. 1.4 The values measured represent the electrical resistance obtained with the equipment and procedures stated herein and do not necessarily agree or correlate with those using other equipment or procedures. 1.5 Units8212;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
- ICS
- 93.080.20
- CCS
- Q20
- 发布
- 2012
- 实施
