Q27 粘结材料 标准查询与下载
共找到 505 条与 粘结材料 相关的标准，共 34 页
Anti-mildew and water-resistant powder
- ICS
- 91.100.10
- CCS
- Q27
- 发布
- 2018-10-22
- 实施
- 2019-04-01
本标准规定了益胶泥的术语和定义、产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于以益胶泥作为部分或全部产品名称的所有益胶泥。该产品适用于工业与民用建筑中工程防水以及有防水抗渗要求的陶瓷砖及饰面石板材粘结。
General Technical Conditions of Yijiao Clay
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2018-09-11
- 实施
- 2018-12-11
Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the behaviour of bitumen sheets during application of mastic asphalt
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2017-09-19
- 实施
- 2017-09-30
本标准规定了陶瓷墙地砖填缝剂(以下简称填缝剂)的术语和定义、分类、代号与标记、一般要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于填充陶瓷墙地砖间接缝的填缝剂。对用于其它类型饰面砖的填缝剂可参照本标准。 本标准不包括指导设计安装陶瓷墙地砖方面的要求。
Grouts for ceramic wall and floor tiles
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2017-07-07
- 实施
- 2018-01-01
Execution of tilings and coverings by thin mortar bed technique - Part 3: Reaction resin adhesives
- ICS
- 83.180;91.100.50
- CCS
- Q27
- 发布
- 2017-04
- 实施
Adhesives for load-bearing timber structures. Test methods. Static load test of multiple bond line specimens in compression shear
- ICS
- 83.180
- CCS
- Q27
- 发布
- 2017-02-28
- 实施
- 2017-02-28
Liming materials - Determination of neutralizing value - Titrimetric methods; German version EN 12945:2014+A1:2016
- ICS
- 65.080
- CCS
- Q27
- 发布
- 2017-01
- 实施
5.1 The intended use of this guide is to provide a high level summary of relevant test methods and performance criteria of aerosol foam sealants that can be helpful in identifying material properties and suitable applications. Use of this guide can be leveraged to further understand how foam sealant materials can be expected to perform and are positioned for intended use by manufacturers in the marketplace. 5.2 This guide is limited in scope and does not cover all possible end use applications. Consult the Aerosol Foam Sealant Manufacturer for specific performance capability, third party reports, or International Code Council evaluation reports. 1.1 This guide covers the general use of aerosol polyurethane and aerosol latex foams extruded from pressurized containers intended for building envelope air barrier sealant and adhesive applications in building construction. It also provides an overview of associated standards and test methods that quantify key physical properties that are useful to design professionals, engineers, specifiers, and end users. 1.2 Currently two main foam sealant types are applicable to this practice, single component polyurethane and latex types. 1.3 The values stated in inch-pound units are to be regarded as standard. SI units provided are for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety considerations see Section 7.
Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2017
- 实施
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints; German version EN 205:2016
- ICS
- 83.180
- CCS
- Q27
- 发布
- 2016-12
- 实施
Polystyrene foam (EPS) composite decorative wire
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2016-10-22
- 实施
- 2017-04-01
Non-structural load-bearing stone adhesives
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2016-10-22
- 实施
- 2017-04-01
Cement-based reinforcement and repair materials
- ICS
- 91.100.10
- CCS
- Q27
- 发布
- 2016-09-28
- 实施
- 2016-12-01
Construction sealants for metal panels
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2016-07-11
- 实施
- 2017-01-01
Polymer cement binder for polyethylene polypropylene waterproof membrane
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2016-07-11
- 实施
- 2017-01-01
Anti-mildew sealant for construction
- ICS
- 91.100.50
- CCS
- Q27
- 发布
- 2016-07-11
- 实施
- 2017-01-01
This document specifies two methods (method A and method B) of measuring the effect of the addition of any material claimed to have a liming effect on the soil, using the same basic principles. Method A measures the changes to the soil pH resulting from the addition of any material claimed to have a liming effect on a standard soil, measured over a period of one month. Method B assesses the efficiency of any material claimed to have a liming effect, using a range of defined soils and measured over a period of up to 2,5 years. The methods are not applicable to mineral products coarser than 6,3 mm for method A or 20 mm for method B, determined according to EN 12948. NOTE These methods allow comparison of products under controlled climatic conditions but do not replace field experiments.
Liming materials - Determination of product effect on soil pH - Soil incubation method
- ICS
- 65.080
- CCS
- Q27
- 发布
- 2016-07
- 实施
Hydraulically bound mixtures. Specifications. Hydraulically stabilized soils
- ICS
- 93.080.20
- CCS
- Q27
- 发布
- 2016-01-31
- 实施
- 2016-01-31
1.1 These test methods cover physical testing of quicklime and hydrated lime, and of limestone not otherwise covered in ASTM standards.2 Note 1: Quicklime and hydrated lime have a high affinity for moisture and carbon dioxide. Caution should be taken to protect both hydrated and quicklime during sampling, storage, and testing (see Practice C50). 1.2 The test procedures appear in the following order: Plastic Property Testing Section Standard Consistency of Lime Putty 5 Plasticity of Lime Putty 6 Water Retention of Hydrated Lime 7 Air Entrainment 8 Soundness Testing Autoclave Expansion of Hydrated and Hydraulic Lime 9 Popping and Pitting of Hydrated Lime 10
Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
- ICS
- 91.100.10
- CCS
- Q27
- 发布
- 2016
- 实施
Interior organic adhesives for ceramic tiles
- ICS
- 83.180;91.060.10;91.100.25
- CCS
- Q27
- 发布
- 2015-12-21
- 实施
