Q76 建筑暖通、空调器材设备 标准查询与下载

DIN EN 1856-1:2009 烟囱.金属烟囱要求.第1部分:系统烟囱制品.英文版本DIN EN 1856-1-2009-09

This European Standard specifies the performance requirements for single and multi-wall system chimney products with rigid metallic liners (chimney sections, chimney fittings and terminals, including supports) with nominal diameter up to and including 1200 mm, used to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal connecting flue pipes not covered here are included in EN 1856-2:2009. This European Standard does not apply to structurally independent (free standing or self-supporting) chimneys.

Chimneys - Requirements for metal chimneys - Part 1: System chimney products; English version of DIN EN 1856-1:2009-09

DIN EN 1856-2:2009 烟囱.金属烟囱的要求.第2部分:金属衬套和烟道接管.英文版本DIN EN 1856-2-2009-09

This document specifies the performance requirements for rigid or flexible metal flue liners, rigid metal connecting flue pipes and their fittings used to convey the products of combustion from appliances to the outside atmosphere (including their supports). Vitreous enamelled connecting flue pipes are also covered by this document. Rigid flue liners can be used as flue liners for renovation or adaptation of existing chimneys and as flue liners of custom built chimneys. Flexible metal flue liners described in this document are exclusively for renovation or adaptation of existing chimneys. Flexible connecting flue pipes and extensible flexible products designed to be compressed or extended along their length are excluded from the scope of this document. This document also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. Single wall and multi-wall system chimney products are covered by EN 1856-1.

Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes; English version of DIN EN 1856-2:2009-09

DIN V 18160-1 Bb.3:2009 烟囱.第1部分:设计和性能.补充件3:依照DIN EN 14471标准的带塑料烟道内衬的系统烟道用国标补充件

Chimneys - Part 1: Design and performance; Supplement 3: National supplement for the use of system chimneys with plastic flue liners according to DIN EN 14471

UL 1996-2009 电管加热器

UL Standard for Safety Electric Duct Heaters (Fourth Edition; Reprint with Revisions Through and Including July 15@ 2016)

DB31/ 435-2009 燃气直燃型溴化锂吸收式冷(热)水机组安全和能效技术要求

Specification for safety and efficiency of gas direct-fired lithium bromide absorption water chiller (heater)

UL 474-2009 减湿器

Dehumidifiers

DIN EN 12101-10 Berichtigung 1:2009 烟和热控制系统 第10部分:电源 技术勘误DIN EN 12101-10-2006-01

Smoke and heat control systems - Part 10: Power supplies; German version EN 12101-10:2005, Corrigendum to DIN EN 12101-10:2006-01; German version EN 12101-10:2005/AC:2007

DIN EN 1886:2009 建筑物的通风.空气调节装置.机械性能,英文版本 DIN EN 1886:2009-07

This standard specifies test methods, test requirements and classifications for air handling units, which are supplying and/or extracting air via a ductwork ventilating/conditioning a part or the whole of the building. This standard is not applicable to the following: a) air conditioning units serving a limited area in a building, such as fan coil units; b) units for residential buildings; c) units producing ventilation air mainly for a manufacturing process. Except for the thermal and acoustic performance of the casing, the test methods and requirements are applicable to both complete units and any separate sections. The filter bypass test is not applicable to the testing of high efficiency particulate air filters (HEPA). NOTE HEPA filters are recommended to be installed downstream of the air handling unit. Such installations should be leak tested in accordance with the appropriate filter standards. The test method for the thermal performance of the casing is applicable to the comparison of different constructions, but not to the calculation of thermal losses through casing or the risk of condensation. Similarly, the test method for the acoustic performance of the casing is applicable to the comparison of different constructions, but not to the provision of accurate acoustic data for specific units.

Ventilation for buildings - Air handling units - Mechanical performance; English version of DIN EN 1886:2009-07

DIN EN 13384-2:2009 烟囱.热和流体动态计算方法.第2部分:适合一种以上加热器具的烟囱(含修改件A2-2009).英文版本DIN EN 13384-2-2009-07

This part of EN 13384 specifies methods for calculation of the thermal and fluid dynamic characteristics of chimneys serving more than one heating appliance. This part of EN 13384 covers both the cases, either (1) where the chimney is connected with more than one connecting flue pipe from individual or several appliances in a multi-inlet arrangement or (2) where the chimney is connected with an individual connecting flue pipe connecting more than one appliance in a cascade arrangement. The case of multiple inlet cascade arrangement is covered by the case (1). This part of EN 13384 deals with chimneys operating under negative pressure conditions (there can be positive pressure condition in the connecting flue pipe) and with chimneys operating under positive pressure conditions and is valid for chimneys serving heating appliances for liquid, gaseous and solid fuels. This part of EN 13384 does not apply to: - chimneys with different thermal resistance or different cross-section in the various chimney segments. This part does not apply to calculate energy gain. - chimneys with open fire places, e.g. open fire chimneys or chimney inlets which are normally intended to operate open to the room - chimneys which serve a mixture of fan assisted or forced draught burners or natural draught appliances. Fan assisted appliances with draught diverter between the fan and the chimney are considered as natural draught appliances. - chimneys with multiple inlets from more than 5 storeys. (This does not apply to balanced flue chimney.) - chimneys serving heating appliances with open air supply through ventilation openings or air ducts, which are not installed in the same air supply pressure region (e.g. same side of building). For positive pressure chimneys this part only applies if any heating appliance which is out of action can be positively isolated to prevent flue gas back flow.

Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance (includes Amendment A2:2009); English version of DIN EN 13384-2:2009-07

BS EN 1264-2:2008+A1:2012 水基表面嵌入式加热和冷却系统. 地板加热. 用计算和试验方法测定热输出的检验法

Water based surface embedded heating and cooling systems. Floor heating. Prove methods for the determination of the thermal output using calculation and test methods

NF P51-002-2:2009 烟囱.热和流体动态计算方法.第2部分:适合多种加热器具的烟囱

Chimneys - Thermal and fluid dynamic calculation methods - Part 2 : chimneys serving more than one heating appliance.

NF P51-002-2/IN1:2009 烟囱.热和液体动力计算方法.第2部分:适合多种加热器具的烟囱

Chimneys - Thermal and fluid dynamic calculation methods - Part 2 : chimneys serving more than one heating appliance.

SANS 10147:2009 制冷系统，包括空调相关装置在内

Gives guidance on the general aspects of safety, construction, erection, operation, inspection and testing of refrigeration plants, other than, any household refrigerator, water cooler or similar equipment that contains less than 1 kg of refrigerant, uni

Refrigerating systems including plants associated with air-conditioning systems

BS EN 1736:2008 制冷系统和热泵.柔性管部件、振动绝缘器、膨胀节和非金属管道.要求、设计和安装

This document describes requirements, design and installation of flexible pipe elements (e. g. metallic flexible pipe, metallic flexible tube, vibration isolator, expansion joint) and non-metallic tube used in the refrigerant circuits of refrigerating systems and heat pumps. It also describes the requirements to qualify the tightness of non-metallic tubes (e.g. plastic) used in evaporating and/or condensing sides of refrigerating systems and heat pumps. It does not apply to flexible pipes that are only occasionally stressed beyond the elastic limit, e. g. during repair work, or to joints which are free to rotate or hinge.

Refrigerating systems and heat pumps — Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes — Requirements, design and installation

NF P51-323:2009 烟囱.组件.混凝土烟道砌块

Chimneys - Components - Concrete flue blocks.

DIN EN 1736:2009 制冷系统和热泵.软管元件、隔振器、膨胀节和非金属管.要求、设计和安装

This document describes requirements, design and installation of flexible pipe elements (e. g. metallic flexible pipe, metallic flexible tube, vibration isolator, expansion joint) and non-metallic tube used in the refrigerant circuits of refrigerating systems and heat pumps. It also describes the requirements to qualify the tightness of non-metallic tubes (e.g. plastic) used in evaporating and/or condensing sides of refrigerating systems and heat pumps. It does not apply to flexible pipes that are only occasionally stressed beyond the elastic limit, e. g. during repair work, or to joints which are free to rotate or hinge.

Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation; English version of DIN EN 1736:2009-02

DIN EN 1858:2009 烟囱.组件.混凝土烟道砖

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in system chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation. This standard does not cover products designated wet (W) in conjunction with corrosion class 3. The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing height, referred to as a type B (Bonding block). This European Standard also applies to storey-height and flue blocks reinforced for handling. NOTE Any reference to the term flue blocks implies both flue blocks and their fittings, except where otherwise indicated.

Chimneys - Components - Concrete flue blocks; English version of DIN EN1858:2009-02

ANSI/ASHRAE 170a-2009 卫生保健设施通风

This addendum changes the design temperature range for newborn intensive-care spaces to be the same as for newborn nursery suites because their health care requirements are similar. It also clarifies one of the space-function descriptions and two of the notes in Table 7-1 to match the intention of these descriptions and notes.

Ventilation of Health Care Facilities

NF P52-400-5:2009 内部水基表面加热和冷却系统.第5部分:地板、天花板和墙上内部加热和制冷表面.热输出的测定

Water based surface embedded heating and cooling systems - Part 5 : heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output.

ANSI/ASHRAE/ASHE 170b-2009 卫生保健设施通风

This proposed addendum revises the requirements for PE rooms regarding filter bank No. 2, exempts relief air from the separation requirements of Section 6.3.1, requires better construction of filter-bank blank-off panels to minimize bypassing, adds specific requirements for temperature control to operating rooms, adds a requirement for differential pressure for morgue and autopsy rooms, and makes various changes to the design parameters of Table 7-1. The aim of these changes is to coordinate the standard with both ASHRAE Standard 62.1-2007 and the Guidelines for Design and Construction of Hospital and Health Care Facilities.

Ventilation of Health Care Facilities