Q76 建筑暖通、空调器材设备 标准查询与下载

JIS B 9908:2011 通风用空气过滤器装置和电动空气清洁器的试验方法

Test method of air filter units for ventilation and electric air cleaners for ventilation

DIN EN 15879-1:2011 电驱动压缩机和空间加热或冷却的地面直接交换偶联热泵的评级和测试.第1部分:直接交换水热泵;德文版本EN 15879-1-2011

This European Standard specifies the terms and definitions, test conditions, test procedures and requirements for the rating and performance of direct exchange-to-water ground coupled heat pumps with electrically driven compressors, used for space heating and/or cooling. Brine can be used instead of water. This European Standard applies to factory-made units with horizontal in-ground collectors. In the case of units consisting of several parts, this standard applies only to those designed and supplied as a complete package. Water-to-direct exchange and direct-exchange-to-direct exchange ground coupled heat pumps are covered by EN 15879-2. Direct exchange-to-air ground coupled heat pumps and air-to-direct exchange heat pumps are covered by EN 15879-3. This European Standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant.

Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps; German version EN 15879-1:2011

NF E35-414-1:2011 制冷系统和热泵用压力设备.第1部分:容器.一般要求.

Pressure equipment for refrigerating systems and heat pumps - Part 1 : vessels - General requirements.

UL 737-2011 壁炉

Fireplace stoves

BS EN 13141-7:2010 建筑物的通风.住宅通风用部件/产品的性能试验.独户住宅机械通风系统用机械供气和排气通风装置(包括热回收)的性能检验

Ventilation for buildings. Performance testing of components/products for residential ventilation. Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single fa

NF E35-420*NF EN 13313:2011 制冷系统和热泵.人员能力.

Refrigerating systems and heat pumps - Competence of personnel.

BS EN 13084-1:2007 独立的工业烟囱.一般要求

Free-standing chimneys. General requirements

ANSI/ASHRAE 170h-2011 卫生保健设施通风

This proposed addendum clarifies the use of recirculating HVAC units through modifications to four parts of the current standard.

Ventilation of Health Care Facilities

NF E51-729-7:2011 建筑物通风.住宅通风用组件/产品的性能试验.第7部分:独院住宅用机械通风系统用机械供气排气通风设备(包括热回收)的性能试验

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7 : performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended fo

ANSI/AHRI 551/591-2011 利用蒸汽压缩循环的水冷和热泵水热包装的作业等级

This standard applies to factory-made vapor compression refrigeration Water-Chilling and Water-Heating Packages including one or more hermetic or open drive compressors. These Water-Chilling and Water-Heating Packages include: - Water-Cooled, Air-Cooled, or Evaporatively-Cooled Condensers - Water-Cooled heat reclaim condensers - Air-to-water heat pump - Water-to-water heat pumps with a capacity greater or equal to 135,000 Btu/h. Water-to-water heat pumps with a capacity less than 135,000 Btu/h are covered by the latest edition of AHRI Standard 320.

Performance Rating of Water-Chilling and Heat Pump Water-Heating Packages Using the Vapor Compression Cycle

ANSI/ASHRAE/ASHE 170g-2011 卫生保健设施通风

This proposed addendum revises the requirements concerning the application of different types of ventilation diffusers in certain spaces.

Ventilation of Health Care Facilities

ANSI/ASTM F1692:2011 家庭中央真空吸尘系统涡轮动力喷嘴寿命评估试验方法

Test Method For Life Evaluation Of A Turbine-Powered Nozzle For Household Central Vacuum Cleaning Systems

DIN 12924-3:2011 实验室设备.通风橱.第3部分:双侧通风橱

Laboratory furniture - Fume cupboards - Part 3: Opposite-sided sash fume cupboards

ANSI/AHRI/ASHRAE/ISO 13256-2:2011 水源热泵.性能测试和评价.第2部分:水-水和盐水-水热泵

This part of ISO 13256 establishes performance testing and rating criteria for factory-made residential, commercial and industrial, electrically-driven, mechanical- compression type, water-to-water and brine-to-water heat pumps. The requirements for testing and rating contained in this part of ISO 13256 are based on the use of matched assemblies.

Water-source heat pumps - testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps

ANSI/UL 793-2011 烟和热的自动操作屋顶通风孔的标准

1. Addition to the requirements of 5.3 to include specifications to the bottom of the roof deck for mechanically-opened vents

Standard for Automatically Operated Roof Vents for Smoke and Heat

ASTM F2093-11 搁架式烤炉的性能标准试验方法

The energy input rate and thermostat calibration tests are used to confirm that the rack oven is operating properly prior to further testing. Preheat energy and time can be useful to food service operators to manage energy demands and to know how quickly the rack oven can be ready for operation. Idle energy rate and pilot energy rate can be used by the food service operator to estimate energy consumption during non-baking periods. The oven''s browning and baking uniformity can be used by an operator to select an oven that bakes a variety of products evenly. Steam performance can be useful for a food service operator interested in the oven''s ability to consistently create steam during a baking cycle. Baking energy efficiency is a precise indicator of rack oven energy performance under various loading conditions. This information enables the food service operator to consider energy performance when selecting a rack oven. Production capacity is used by food service operators to choose a rack oven that matches their food output requirements.1.1 This test method evaluates the energy consumption and baking performance of rack ovens. The food service operator can use this evaluation to select a rack oven and understand its energy performance. 1.2 This test method is applicable to thermostatically controlled, gas and electric rack ovens. 1.3 The rack oven can be evaluated with respect to the following (where applicable): 1.3.1 Energy input rate (10.2), 1.3.2 Thermostat calibration (10.3), 1.3.3 Preheat energy and time (10.4), 1.3.4 Idle energy rate (10.5), 1.3.5 Pilot energy rate, if applicable (10.6), 1.3.6 White sheet cake browning (10.7), and 1.3.7 Steam performance (10.8), and 1.3.8 Baking energy efficiency and production capacity (10.9). 1.4 The values stated in inch-pound units are to be regarded as standard. 1.5 This test method may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Performance of Rack Ovens

ANSI/AHRI 1061(SI)-2011 能量回收通风设备用空气热交换器的性能评价

This standard applies to factory-made Air-to-Air Heat Exchangers for use in Air-to-Air Energy Recovery Ventilation Equipment as defined in Section 3.

Performance Rating of Air-to-Air Heat Exchangers for Energy Recovery Ventilation Equipment

ANSI/AHRI 340/360with Addenda 1 and 2-2011 商业和工业的整体式空调和热泵设备的性能评价

Performance Rating of Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment

ANSI/AHRI 210/240with Addenda 1 and 2-2011 单一空调&空调源热泵设备的性能评定

Performance Rating of Unitary Air-Conditioning & Air-Source Heat Pump Equipment

ANSI/AHRI 1060(I-P)-2011 能量回收通风设备用空气热交换器的性能评价

This standard applies to factory-made Air-to-Air Heat Exchangers for use in Air-to-Air Energy Recovery Ventilation Equipment as defined in Section 3.

Performance Rating of Air-to-Air Heat Exchangers for Energy Recovery Ventilation Equipment