Q86 市容卫生器材设备 标准查询与下载

ASTM E2740-10 需进行抗爆裂性试验的垃圾筒的标准规范

1.1 This specification provides performance requirements for trash receptacles when subjected to the explosive tests described in Test Method E2639. 1.1.1 These trash receptacles are intended for use in public spaces. 1.2 Units8212;The values stated in SI units are to be regarded as the standard. The values stated in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing

BS 8520-1:2009 含石棉材料的受控清除用设备.受控湿润设备.规范

This British Standard specifies requirements for equipment for the controlled wetting of asbestos-containing material (ACM) by injection or spraying of liquid to suppress the release of airborne asbestos fibres. It is applicable to the wetting of ACM by: • multipoint injection of sprayed coatings, insulating board, thermal insulation and coatings on pipes, tanks and vessels; • spraying with low-pressure spray heads of insulating board and other materials less than 10 mm thick.

Equipment used in the controlled removal of asbestos-containing materials - Controlled wetting equipment - Specification

BS 8520-2:2009 含石棉材料的受控清除设备.负压装置.规范

This British Standard specifies requirements for portable and/or transportable negative pressure units (NPUs) incorporating HEPA filters covered by BS EN 1822 for use in the controlled removal of asbestos-containing materials (ACMs). This British Standard is also applicable to NPUs designed to create negative pressure within a portable decontamination unit facility or working enclosure and two-part NPUs. This British Standard is not applicable to local exhaust ventilation.

Equipment used in the controlled removal of asbestos-containing materials - Negative pressure units - Specification

BS 8520-3:2009 含石棉材料的受控清除设备.H级真空吸尘器的操作,清洁和维护.实施规程

This British Standard gives recommendations for the operation, cleaning and maintenance of class H (high hazard) vacuum cleaners containing a filter conforming to BS EN 1822 in the controlled removal of asbestos‑containing materials (ACM). It is not applicable to any other types of vacuum cleaner for vacuuming up liquids or other applications. NOTE 1 Class H vacuum cleaners are commonly referred to as H‑type vacuum cleaners. NOTE 2 Attention is drawn to the use of class H vacuum cleaners as described in HSE task guidance Asbestos Essentials HSG 210.

Equipment used in the controlled removal of asbestos-containing materials. Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice

SANS 95-4:2009 移动式废品箱．第4部分：宽耳轴式或BG和/或宽梳形提升装置用容积为1700升及以下的带平盖的4轮废品箱．尺寸和设计

Specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1 700 l to be used by wide trunnion or BG-lifting device and/or wide comb lifting devices.

Mobile waste containers - Part 4: Containers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BGand/ or wide comb lifting device - Dimensions and design

SANS 95-5:2009 移动式废品收集箱．第5部分：性能要求和检验方法

Gives the test methods for mobile waste containers according to EN 840-1 to EN 840-4 (published in South Africa as an identical adoption under the designation SANS 95-1 to SANS 95-4). Gives the levels to be reached during tests after they have been done.

Mobile waste containers Part 5: Performance requirements and test methods

SANS 95-3:2009 移动式废品箱．第3部分：耳轴形或/和梳齿形提升装置用四轮容积为1300升带圆盖的装料箱．尺寸和设计

Specifies dimensions and requirements of mobile waste containers with 4 wheels, with dome lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting devices.

Mobile waste containers Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design

SANS 95-1:2009 移动式废品收集箱．第1部分：梳形提升装置用双轮最大容积为400升的装料箱．尺寸和设计

Specifies dimensions and design requirements of mobile waste containers with 2 wheels, with capacity up to 400 l to be used by comb lifting devices.

Mobile waste containers Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design

SANS 95-6:2009 移动式废品收集箱．第6部分：安全及卫生要求

Provides the essential safety, health and ergonomic requirements for mobile waste containers according to EN 840-1 to EN 840-4 (published in South Africa as an identical adoption under the designation SANS 95-1 to SANS 95-4), not including hazardous wast

Mobile waste containers Part 6: Safety and health requirements

SANS 95-2:2009 移动式废品收集箱．第2部分：耳轴形或/和梳齿形提升装置用四轮容积为1300升带平盖的装料箱．尺寸和设计

Specifies dimensions and design requirements of mobile waste containers with 4 wheels, with flat lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting devices.

Mobile waste containers Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design

CJ/T 305-2009 家用燃气灶具陶瓷面板

Household gas cooker ceramic panel

SANS 493:2009 钢制垃圾桶

Covers requirements for the dimensions, construction and strength of zinc-coated steel bins of nominal capacities 85 L and 57 L.

Steel refuse bins

DIN SPEC 1108-2:2009 道路清洁,冬季维护和污水处理系统.废物处理和回收物流服务.第2部分:操作和人员要求

Services for waste and recycling logistics, road cleaning, winter maintenance and sewage systems - Part 2: Requirements for operations and personnel

DIN SPEC 1108-1:2009 道路清洁,冬季维护和污水处理系统.废物处理和回收物流服务.第1部分:专用术语

Services provided for waste and recycling logistics, road cleaning, winter maintenance and sewage systems - Part 1: Terminology

SANS 1321-1:2009 非金属废料收集器.第1部分:废塑料收集器

Covers waste traps, other than traps for soil water, moulded from thermoplastic materials, and designed to be used for domestic purposes with baths, sinks, showers, and other waste water fitments that have appropriately sized outlets.

Non-metallic waste traps Part 1: Plastics waste traps

BS EN 13071-1:2008 上部提升和底部空的体积小于5000L的固定式废弃物容器.一般要求

This European Standard specifies requirements of stationary containers, top lifted and bottom emptied, used for collection of solid non-hazardous wastes, with capacity up to 5 000 l. This European Standard specifies the general characteristics of such containers and their accessories, the test methods and the safety requirements.

Stationary waste containers up to 5000 l, top lifted and bottom emptied - General requirements

BS EN 13071-2:2008 上部提升的和底部空的体积小于5000L的固定式废弃物收集容器.地下或部分地下系统用附加要求

This European Standard specifies the additional requirements for underground or partly underground systems top lifted and bottom emptied, used for collection of solid non-hazardous wastes with a capacity up to 5 000 l.

Stationary waste containers up to 5000 l, top lifted and bottom emptied - Additional requirements for underground or partly underground systems

BS EN 13071-2:2008+A1:2013 上部提升的和底部空的体积小于5000 l的固定式废弃物收集容器.地下或部分地下系统的附加要求

Stationary waste containers up to 5000 l, top lifted and bottom emptied - Additional requirements for underground or partly underground systems

ANSI/NSF 21(i4)-2009 热塑性垃圾箱

Thermoplastic refuse containers

ANSI/NSF 13(i4)-2009 废物处理机和处理系统

Refuse processors and processing systems