Q86 市容卫生器材设备 标准查询与下载

DB11/T 586-2008 扫路机专业性能等级划分及评价

Sweepers professional performance classification and evaluation

ANSI/ASTM F1899:2008 不带水压组件的食物废弃物采集器

This specification covers pulper assemblies intended for grinding of food scraps and limited amounts of cardboard, paper, and disposable plastic food service wear.

Food Waste Pulper without Waterpress Assembly

ANSI/ASTM F917:2008 商业废弃食物处理器

This specification covers commercial food waste disposers intended for the grinding of food waste.

Commercial Food Waste Disposers

BS EN 15132:2006 容量小于1700升的可移动废弃物容器用容器罩.性能要求和试验方法

This European Standard specifies the requirements for container shells for mobile waste containers with a capacity up to 1 700 l covered by EN 840-1 to EN 840-4. This European Standard specifies the general performance characteristics of such shells as well as the test methods, and gives recommendations for installation.

Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods

SANS 1321-2:2007 非金属废料收集器．第2部分：橡胶废料收集器

Covers requirements for 'P', 'S' and dip-tube bottle waste traps moulded from suitable butyl or EPDM rubber compounds and designed for use in domestic applications with baths, sinks, showers and other fitments.

Non-metallic waste traps Part 2: Rubber waste traps

SANS 1310:2007 聚合材料垃圾箱

Covers material, dimensional and constructional requirements for refuse bins with removable lids, made of polymeric materials and of nominal capacities 57 and 85 L. Includes methods of testing rigidity, resistance to fracture, handle strength of bins an

Refuse bins of polymeric materials

SANS 1494:2007 移动式垃圾箱

Covers 240 L bins of thermoplastic material that are provided with wheels and are intended for use with mechanical equipment.

Mobile refuse bins

UL 1086 BULLETIN-2007 家用垃圾压缩器安全性标准/注:ANSI/UL 1086-2005的修订版 * 批准日期:2007-08-08

The following is being proposed: 1. Installation and User Manuals Supplied in Electronic Format in Addition to Required Printed Materials 2. Deletion of Obsolete Asbestos-Insulated Wire, Type AF.

Standard for Safety for Household Trash Compactors / Note: revision of ANSI/UL 1086-2005 * Approved 2007-08-08.

DIN 30706-1:2006 城市技术设施用术语.第1部分:水处理

The standard contents specifications of terms in the field of waste disposal.

Terminology of Municipal Technical Services - Part 1: Waste disposal

UL 791-2006 住宅用焚烧炉

1.1 These requirements apply to direct-fed incinerators, including those of the gas and electric ignition types, designed primarily for use in one-and two-family dwellings for the burning of ordinary combustible waste materials and garbage incidental to domestic occupancy and having a firebox or charging compartment of not over 5 cubic feet capacity. 1.2 Incinerators of this type may also be employed in other occupancies including commercial establishments and institutions where the refuse is of a character for which the incinerator is designed and is not excessive in amount. They are not intended for use in spaces in which flammable vapor or gases may be present. 1.3 Incinerators covered by these requirements are the factory-made type not requiring field construction, and are designed for inside use. These requirements do not cover an incinerator that requires the use of a brick or masonry wall, etc., which forms a part of the building structure, or requires masonry work at the site to complete the incineration chamber. 1.4 Requirements for the installation and use of Domestic-Type Incinerators are included in the Standard for Incinerators of the National Fire Protection Association, NFPA No. 8221. 1.5 A product that contains features, characteristics, components, materials, or systems new or different from those in use when the standard was developed, and that involves a risk of fire, electric shock, or injury to persons, shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the level of safety for the user of the product as originally anticipated by the intent of this standard.

UL Standard for Safety Residential Incinerators

CJ/T 227-2006 垃圾生化处理机

本标准规定了垃圾生化处理设备的术语、分类、型号、技术要求、试验方法、检验规则、标志、包装、运输、储存等。 本标准适用于使用微生物菌剂对可堆肥处理的生活垃圾进行生化处理的设备。

Bio-chemical processor for organic waste

CJJ 47-2006 生活垃圾转运站技术规范

本规范适用于新建、改建和扩建转运站工程的规划、设计、施工及验收。

Technical code for transfer station of municipal solid waste

DB11/T 312-2005 扫路机分类

本标准规定了扫路机的种类划分。本标准适用于各种形式的扫路机，不包含洗地机、地面污垢清除机。

Categories of sweepers

DB11/T 313-2005 扫路机试验方法

本标准规定了扫路机的行驶性能、清扫性能和可靠性试验方法。本标准只适用各类机动、电动扫路机

Test method of sweepers

BS 1703:2005 垃圾道和垃圾斗规范

This British Standard specifies requirements for gravity transport systems for refuse in multi-storey buildings, consisting of refuse chutes in the form of one or more vertical pipes, complete with hoppers, receiving refuse from successive floors in a building and discharging it into a refuse storage system.

Refuse chutes and hoppers - Specification

DIN 30733:2005 垃圾收集车用踏板及其固定

The standard contents dimensions and requirements for footboards to ensure the interchangeability.

Footboards and their fixation at refuse collection vehicles

DIN 30706-2:2005 城市技术服务设施的术语.第2部分:道路表面清扫

This standard specifies terms for road surface cleaning.

Terminology of Municipal Technical Services - Part 2: Road surface cleaning

CJJ 27-2005 城镇环境卫生设施设置标准

本标准适用于城镇环境卫生设施的设置。

Standard for setting of town environmental sanitation facilities

PAS 60-3-2004 含石棉材料的受控清除设备.第3部分:H级真空吸尘器的操作、清洁和维护.实施规程

This Publicly Available Specification (PAS) gives recommendations for the operation, cleaning and maintenance of class H vacuum cleaners in the controlled removal of asbestos-containing materials. It is not applicable to any other types of vacuum cleaner or applications. NOTE Class H vacuum cleaners are commonly referred to as H-type.

Equipment used in the controlled removal of asbestos-containing materials--Part 3:Operation,cleaning and maintenance of class H vacuum cleaners-Code of practice

PAS 60-2-2004 含石棉材料的受控清除设备.第2部分:负压装置.规范

This Publicly Available Specification (PAS) specifies requirements for portable and/or transportable Negative Pressure Units (NPUs) for use in the controlled removal of asbestos-containing materials. This PAS is also applicable to NPUs designed for the provision of negative pressure within a portable decontamination facility and two-part NPUs. This PAS is not applicable to local exhaust ventilation.

Equipment used in the controlled removal of asbestos-containing materials--Part 2:Negative Pressure Units-Specification