R04 基础标准与通用方法 标准查询与下载

JT/T 331.3-1996 港口劳动定员 煤炭码头

本标准规定了港口煤炭专业码头的装卸生产人员的劳动定员。 本标准适用于港口煤炭专业码头的劳动定员管理。

port terminal labour manning standard.Coal terminal

BS DD ENV 12796:1997 道路运输和交通远程信息管理(RTTT).公共运输. 鉴定器

Road transport and traffic telematics - Public transport - Validators

JT/T 330-1997 港口件杂货物装卸作业安全技术要求

本标准规定了件杂货物在港口装卸作业过程中的一般安全要求以及装卸船、装卸车、吊运、水平运输、堆拆垛过程中的安全技术要求。 本标准适用于桶装、袋装、箱装(非集装箱)、捆状、托盘成组、锭类等件杂货物的装卸作业。 本标准不适用于钢材、散货集装袋、重大件、细长形捆扎货物以及纸品、危险货物等的装卸作业。

Safe-technical requirements for piece and miscellaneous cargo handling in port

BS DD ENV 12694:1997 公共运输.道路车辆.可调的电子外部信号的尺寸要求

Covers buses, trams and trolley-buses but excludes underground and railway vehicles. Excludes mechanical signs without electronic control.

Public transport - Road vehicles - Dimensional requirements for variable electronic external signs

BS DD ENV 12315-2:1997 交通和旅行信息(TTI).通过专用短程通信的TTI信息.数据规范.上行线路(车辆对路边)

Specifies the data telegram containing the measurement values transmitted from the vehicles to the beacons. The data described corresponds to the downlink specification for route guidance information (RGI) application.

Traffic and traveller information (TTI) - TTI messages via dedicated short-range communication - Data specification - Uplink (vehicle to roadside)

BS DD ENV 12315-1:1997 交通和旅行信息(TTI).通过专用短程通信的TTI信息.数据规范.下行线路(路边对车辆)

Provides the framework to enable the providers of TTI to supply information to a large number of equipped vehicles and for in-vehicle equipment to receive, process and display the messages.

Traffic and traveller information (TTI) - TTI messages via dedicated short-range communication - Data specification - Downlink (roadside to vehicle)

AASHTO DIVISION I 5.14-1996 重力和半重力墙设计,以及悬臂墙设计1997中期

lated in Article 3.22 which are applicable to the particular site or walVfoundation type. Impact forces shall not be included in retaining wall design. (Refer to Article 3.8.)

Gravity and Semi-Gravity Wall Design, and Cantilever Wall Design Interim 1997

ASTM F1702-96(2002)e1 使用轻型便携式仪器测量普通活动桥面系统的冲击衰减特性标准试验方法

The Gmax values obtained by these procedures are indicative of the cushioning properties of playing surfaces. Optional time history data can be used to describe further these properties.1.1 This test method covers the determination of shock-attenuation characteristics of natural turfgrass and soil playing surface systems using lightweight portable apparatus. This test method is applicable for comparing natural surfaces and for assessing the effects of management practices on shock attenuation. This test method also can be used to assess the compactibility of natural surfaces by recording G max values or penetration of successive impacts, or both. 1.2 This test method provides a procedure for assessing impact characteristics in the field, on actual playing surfaces and on research plots. Numerical data will not be comparable to data obtained using a different missile mass or geometry, using a different drop height, or using a different standard method, for example, Test Method F 355. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus

ASTM F1702-96 使用轻型便携式仪器测量普通活动桥面系统的冲击衰减特性标准试验方法

1.1 This test method covers the determination of shock-attenuation characteristics of natural turf grass and soil playing surface systems using lightweight portable apparatus. This test method is applicable for comparing natural surfaces and for assessing the effects of management practices on shock attenuation. This test method also can be used to assess the compatibility of natural surfaces by recording G max values or penetration of successive impacts, or both. 1.2 This test method provides a procedure for assessing impact characteristics in the field, on actual playing surfaces and on research plots. Numerical data will not be comparable to data obtained using a different missile mass or geometry, using a different drop height, or using a different standard method, for example, Test Method F 355. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Shock-Attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus

ASTM F1655-95(2007) 培训野外、延误或延长的交通中第一响应者的标准导则

Individuals will be initially or concurrently trained in accordance with U.S. D.O.T. Course Guide for First Responders3 and Guide F 1453. This guide does not suggest a particular training sequence. This guide may be used by individuals developing training programs for non-traditional EMS environments. This guide acknowledges the need to provide additional specific training for first responders who will practice in the wilderness, delayed or prolonged transport settings. Individuals responsible for training first responders should identify those who will practice in the wilderness, delayed or prolonged transport settings and must ensure that such personnel are competent in all skills needed for the unique settings.1.1 This guide covers minimum training standards for first responders who may care for sick or injured persons in the specialized pre-hospital situations of the wilderness, delayed, or prolonged transport settings, including catastrophic disasters.1.2 This guide establishes supplemental or continuing education programs that will be taught to individuals trained to the first responder level by an appropriate authority.1.3 This guide does not provide training to be used, ordinarily, in the traditional EMS or ambulance transportation environments.1.4 Included in this guide is a standard for the evaluation of the knowledge and skills defined within this guide.1.5 Successful completion of a course based on this guide neither constitutes nor implies certification or licensure.1.6 This guide does not establish medical protocols, nor does it authorize invasive procedures without specific authorization and medical control.1.7 The values stated in inch-pound units are to be regarded as the standard.1.8 Operating within the framework of this guide may expose personnel to hazardous materials or environments, procedures, and equipment or all of these.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings

ASTM F1655-95 培训野外、延误或延长的交通中第一响应者的标准导则

1.1 This guide covers minimum training standards for first responders who may care for sick or injured persons in the specialized pre-hospital situations of the wilderness, delayed, or prolonged transport settings, including catastrophic disasters. 1.2 This guide establishes supplemental or continuing education programs that will be taught to individuals trained to the first responder level by an appropriate authority. 1.3 This guide does not provide training to be used, ordinarily, in the traditional EMS or ambulance transportation environments. 1.4 Included in this guide is a standard for the evaluation of the knowledge and skills defined within this guide. 1.5 Successful completion of a course based on this guide neither constitutes nor implies certification or licensure. 1.6 This guide does not establish medical protocols, nor does it authorize invasive procedures without specific authorization and medical control. 1.7 The values stated in inch-pound units are to be regarded as the standard. 1.8 Operating within the framework of this guide may expose personnel to hazardous materials or environments, procedures, and equipment or all of these. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings

ASTM F1655-95(2002) 培训野外、延误或延长的交通中第一响应者的标准导则

1.1 This guide covers minimum training standards for first responders who may care for sick or injured persons in the specialized pre-hospital situations of the wilderness, delayed, or prolonged transport settings, including catastrophic disasters. 1.2 This guide establishes supplemental or continuing education programs that will be taught to individuals trained to the first responder level by an appropriate authority. 1.3 This guide does not provide training to be used, ordinarily, in the traditional EMS or ambulance transportation environments. 1.4 Included in this guide is a standard for the evaluation of the knowledge and skills defined within this guide. 1.5 Successful completion of a course based on this guide neither constitutes nor implies certification or licensure. 1.6 This guide does not establish medical protocols, nor does it authorize invasive procedures without specific authorization and medical control. 1.7 The values stated in inch-pound units are to be regarded as the standard. 1.8 Operating within the framework of this guide may expose personnel to hazardous materials or environments, procedures, and equipment or all of these. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Training First Responders Who Practice in Wilderness, Delayed, or Prolonged Transport Settings

JT/T 95-1994 海船航海图书资料配备要求

本标准规定了海船按计划航程所经航区应配备的基本的航海图书资料。 本标准适用于中国籍海船。适用本标准的船舶，按航行区域执行本标准。 本标准不适用于渔船、体育运动船、用于军事、公务的船艇及港作船舶。

Requirements for the Carriage of Nautical Chart and Publications on Sea-going ships

NF P98-200-2:1992 路面试验.滚动加载挠度测量.第2部分:用改进的贝克曼量仪测定挠度和曲率值

Tests relating to pavements. Measurement of a rolling load deflection. Part 2 : determination of deflection and curvature values using modified behkelman beam.

AASHTO HWPD-1-1990 工程建设危险废物指南

Hazardous Waste Guide for Project Development

Hazardous Waste Guide for Project Development

ISO/TR 8349:1986 道路车辆.道路表面摩擦系数的测量

Road vehicles; Measurement of road surface friction

JT/T 33.32-1993 交通行业工人技术等级标准 公路工程与航务工程 船舶起重工

本标准规定了航务工程船舶起重工的等级、应知、应会和工作实例。 本标准适用于沿海和其他水域航务工程船舶起重工的培训、考核和使用。????

Technical grade standards for workers in the transportation industry Highway engineering and navigation engineering Ship cranes

JT/T 27.14-1993 交通行业工人技术等级标准 公路运输与公路养护 汽车货运站务员

本标准规定了汽车货运站务员的等级、应知、应会和工作实例。 本标准适用于汽车货运站务员的培训、考核和使用。

Technical grade standards for workers in the transportation industry Road transport and road maintenance Auto freight station attendants

JT/T 27.15-1993 交通行业工人技术等级标准 公路运输与公路养护 公路货运装卸工

本标准规定了公路货运装卸工的等级、应知、应会和工作实例。 本标准适用于公路货运装卸工的培训、考核和使用。

Technical Grade Standards for Workers in the Transportation Industry Road Transport and Road Maintenance Road Freight Handlers

JT/T 27.16-1993 交通行业工人技术等级标准 公路运输与公路养护 汽车油料工

本标准规定了汽车油料工的等级、应知、应会和工作实例。 本标准适用于对汽车油料工的培训、考核和使用。

Technical grade standards for workers in the transportation industry Road transport and road maintenance Auto oil workers