S33 走行部分 标准查询与下载
共找到 383 条与 走行部分 相关的标准，共 26 页
Railway applications - Wheelsets and bogies - Wheels - Product requirements.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06-01
- 实施
Railway applications - Wheelsets and bogies - Monobloc Wheels - Technical approval procedure - Part 1 : forged and rolled wheels.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06-01
- 实施
This European Standard specifies the characteristics of railway wheels for use on European networks. Four steel grades, ER6, ER7, ER8 and ER9 are defined in this standard; for European freight wagon interoperability purposes only grades ER6, ER7 and ER8 are applicable. Certain characteristics are defined according to a category 1 or a category 2. Category 1 is generally chosen when the train speed is higher than 200 km/h. Freight vehicles running at speeds lower than 200 km/h generally use wheels of Category 2. These categories can sometimes be subdivided, depending upon the characteristics. This standard is applicable to solid forged and rolled wheels which are made from vacuum degassed steel and have a chilled rim. They are to have already been used in commercial conditions on a European network in a significant quantity, or to have satisfied a technical approval procedure according to EN 13979-1 for their design.
Railway applications - Wheelsets and bogies - Wheels - Product requirements; German version EN 13262:2004+A2:2011
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06
- 实施
The aim of this European Standard is to define the requirements that a monobloc wheel of a freight of passenger railway vehicle non-powered axle shall meet in order to be able to be used on a European network. For wheels of powered axles or wheels with noise dampers, the requirements may be amended or supplemented. For light vehicles and tramways, other standards or documents accepted by the customer and supplier may be used. This European Standard only applies to wheels of new design. These requirements are intended to assess the validity of the design choice for the proposed use. The assessment of these requirements is the technical approval procedure. This European Standard is applicable to forged and rolled wheels for which the quality requirements are defined in EN 13262.
Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels; German version EN 13979-1:2003+A2:2011
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06
- 实施
This document specifies the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements. It is limited to the structural requirements of bogie frames including bolsters and axlebox housings. For the purpose of this document, these terms are taken to include all functional attachments, e.g. damper brackets.
Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames; German version EN 13749:2011
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06
- 实施
This European Standard consolidates all the separate requirements specified in rolling stock TSLs and European Standards relating to bogies and running gear together into an overall requirement and process that ensures a functional and safe design is achieved for a defined operating envelope. There are many European Standards that specify the design requirements and associated processes of bogie and running gear components and sub-assemblies.There are also European Standards that specify vehicle performance and validation requirements that depend directly on the bogies or running gear.The objective of this standard is to bring all these separate design criteria together.This is accomplished by specifying the design and validation processes to be used for bogies and running gear with particular focus on the two key disciplines of dynamic behaviour and structural integrity.To ensure that safe operation can be continued througnout the product life the definition of a maintenance plan is also required.
Railway applications - Requirements for bogies and running gears; German version EN 15827:2011
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06
- 实施
本标准规定了铁道车辆滚动轴承润滑脂的技术要求、试验方法、检验规则和包装、标志、贮运及验收。 本标准适用于铁道车辆滚动周轴承Ⅲ型润滑脂和Ⅳ型润滑脂。
Railway vehicle rolling bearing lubricating grease
- ICS
- 45.060.20
- CCS
- S33
- 发布
- 2011-05-20
- 实施
- 2011-11-01
本标准规定了铁道货车弹性旁承的技术要求、试验方法。检验规则与标志、包装、运输、贮存等。 本标准适用于铁道货车JC系列弹性旁承（包括JC型、JC-1型、JC-2型、JC-3型，以下简称JC系列旁承）与BD型弹性旁承（以下简称BD型旁承）的制造与检验。
Elastic side bearings for railway freight wagons
- ICS
- 45.060.20
- CCS
- S33
- 发布
- 2011-05-20
- 实施
- 2011-11-01
本标准规定了铁道货车用承载鞍（以下简称承载鞍）的术语和定义、技术要求、检验方法、检验规则、标志、包装、贮存和运输等。 本标准适用于铁道货车用承载鞍的制造和检验。
Adapter or railway freight car
- ICS
- 45.060.20
- CCS
- S33
- 发布
- 2011-05-20
- 实施
- 2011-11-01
本标准规定了铁道货车心盘磨耗盘的技术要求、检验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于铁道货车转向架用心盘磨耗盘的制造与检验。
Center wear plate of railway freight wagons
- ICS
- 45.060.20
- CCS
- S33
- 发布
- 2011-05-20
- 实施
- 2011-11-01
本标准规定了铁道货车转向架承载鞍橡胶垫的技术要求、试验方法、检验规则、标识、包装、贮存及运输要求等。 本标准适用于铁道货车转K6型转向架承载鞍橡胶垫的制造与检验。
Rubber metal pad for freight car load bearing saddle
- ICS
- 45.060.20
- CCS
- S33
- 发布
- 2011-05-20
- 实施
- 2011-11-01
This European Standard applies to pneumatic half couplings designed to couple either the brake pipes ormain reservoir pipes of railway vehicles, without taking the type of vehicles and track-gauge into consideration. This European Standard gives the requirements for the design, dimensions, testing and quality assurance ofpneumatic half couplings.
Railway applications - Pneumatic half couplings; German version EN 15807:2011
- ICS
- 45.040;45.060.01
- CCS
- S33
- 发布
- 2011-05
- 实施
This European Standard specifies the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements. It is limited to the structural requirements of bogie frames including bolsters and axlebox housings. For the purpose of this European Standard, these terms are taken to include all functional attachments, e.g. damper brackets.
Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-04-30
- 实施
- 2011-04-30
This European Standard consolidates all the separate requirements specified in rolling stock TSIs and European Standards relating to bogies and running gear together into an overall requirement and process that ensures a functional and safe design is achieved for a defined operating envelope. There are many European Standards that specify the design requirements and associated processes of bogie and running gear components and sub-assemblies. There are also European standards that specify vehicle performance and validation requirements that depend directly on the bogies or running gear. The objective of this standard is to bring all these separate design criteria together. This is accomplished by specifying the design and validation processes to be used for bogies and running gear with particular focus on the two key disciplines of dynamic behaviour and structural integrity. To ensure that safe operation can be continued throughout the product life the definition of a maintenance plan is also required. This European Standard is applicable to bogies and running gear intended for vehicles that will operate under the Interoperability Directives on designated TEN routes. The requirements, however, can be used in other applications at the discretion of the interested parties. It specifies the requirements to achieve a satisfactory design of bogie or running gear and to validate the design against the relevant performance and safety criteria. Technical requirements are specified directly or by making reference to the relevant European standards and include the nature and content of an auditable record that should be produced of the design and validation processes. The requirements address only the design and validation of bogies and running gear. No requirements are set for other systems components that are attached to the bogies or running gear, except to establish that a satisfactory interface has been provided. NOTE Specifications that relate to bogies and running gear can only be considered in the context of a specific vehicle application. Therefore the performance, both safety and otherwise, can relate only to the bogies and running gear as part of a vehicle configuration and not to the individual elements of the bogies or running gear.
Railway applications. Requirements for bogies and running gears
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-04-30
- 实施
- 2011-04-30
This standard: 1) defines the forces and moments to be taken into account with reference to masses and braking conditions; 2) gives the stress calculation method for axles with outside axle journals; 3) specifies the maximum permissible stresses to be assumed in calculations for steel grade EA1N defined in EN 13261; 4) describes the method for determination of the maximum permissible stresses for other steel grades; 5) determines the diameters for the various sections of the axle and recommends the preferred shapes and transitions to ensure adequate service performance. This standard is applicable to: 6) solid and hollow axles of railway rolling stock used for the transportation of passengers and freight; 7) axles defined in EN 13261; 8) all gauges. This standard is applicable to axles fitted to rolling stock intended to run under normal European conditions. Before using this standard, if there is any doubt as to whether the railway operating conditions are normal, it is necessary to determine whether an additional design factor has to be applied to the maximum permissible stresses. The calculation of wheelsets for special applications (e. g. tamping/lining/levelling machines) may be made according to this standard only for the load cases of free-running and running in train formation. This standard does not apply to workload cases. They are calculated separately. For light rail and tramway applications, other standards or documents agreed between the customer and supplier may be applied. Non-powered axles of motor bogies and locomotives are analysed according to the requirements of EN 13104.
Railway applications - Wheelsets and bogies - Non-powered axles - Design method; German version EN 13103:2009+A1:2010
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-02
- 实施
Railway applications - Wheelsets and bogies - Non-powered axles - Design guide.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01-01
- 实施
Railway applications - Wheelsets and bogies - Wheels - Tread profile.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01-01
- 实施
- 2011-01-15
Railway applications - Wheelsets and bogies - Wheels - Tread profile.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01-01
- 实施
Railway applications - Wheelsets and bogies - Non-powered axles - Design guide.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01-01
- 实施
- 2011-01-15
Railway applications - Wheelsets and bogies - Axles - Product requirements.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-01-01
- 实施
