S81 牵引变电 标准查询与下载
共找到 97 条与 牵引变电 相关的标准，共 7 页
Railway application. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363
- ICS
- 45.060.20
- CCS
- S81
- 发布
- 2013-10-31
- 实施
- 2013-10-31
TB/T 1869的本部分规定了主要用于50 Hz交流连续式轨道电路或直流电力牵引的50 Hz相敏轨道电路中作为受电端中继变压器(以下简称变压器)的产品型号、技木要求、试验方法、检验规则及标志、包装、运输、贮存。本部分适用于变压器的设计、制造、检验和维修。
Transformers for railway signaling.Part5: BZ series track relay transformers
- ICS
- 45.020
- CCS
- S81
- 发布
- 2013-03-13
- 实施
- 2013-07-01
本标准规定了电气化铁路动态无功补偿装置的术语和定义、分类、技术要求、检验方法、检验规则、标志、包装、运输、储存等。本标准适用于单相工频交流电气化铁路用动态无功补偿装置。
Dynamic reactive power compensation device for electrified railway
- ICS
- 29.280
- CCS
- S81
- 发布
- 2013-02-20
- 实施
Railway applications. Rolling stock equipment. Capacitors for power electronics. Electric double-layer capacitors
- ICS
- 31.060.10;45.060.01
- CCS
- S81
- 发布
- 2012-10-31
- 实施
- 2012-10-31
Railway applications. Current collection systems. Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
- ICS
- 29.280;45.060.10
- CCS
- S81
- 发布
- 2012-02-29
- 实施
- 2012-02-29
Railway applications - Fixed installations - Process, measures and demonstration of safety for electric traction systems; German version CLC/TS 50562:2011
- ICS
- 29.280
- CCS
- S81
- 发布
- 2012-01
- 实施
- 2012-01-01
"This part of IEC 62196 is applicable to plugs@ socket-outlets@ connectors@ inlets and cable assemblies for electric vehicles (EV)@ herein referred to as ""accessories""@ intended for use in conductive charging systems which incorporate control means@ with a rated operating voltage not exceeding ?C 690 V a.c. 50 Hz ?C 60 Hz@ at a rated current not exceeding 250 A@ ?C 1 500 V d.c. at a rated current not exceeding 400 A. These accessories and cable assemblies are intended to be used for circuits specified in IEC 61851-1:2010 which operate at different voltages and frequencies and which may include ELV and communication signals. The accessories covered by this standard are intended only to be used with vehicles that comply with the requirements of 7.2.3.1 of IEC 61851-1:2010. These accessories and cable assemblies are to be used in an ambient temperature of between ?C30 ??and +50 ?? NOTE In some countries@ other requirements may apply. These accessories are intended to be connected only to cables with copper or copper-alloy conductors. The accessories covered by this standard are for use in certain modes of charging EVs. These modes are defined in IEC 61851-1:2010. These definitions and a description of the types of connection (cases A@ B and C)@ also described in IEC 61851-1:2010@ are reproduced herein as Annex A. NOTE In the following country@ Mode 1 will not be allowed: UK. This standard does not apply to those standardised accessories used in charging systems where the use of such accessories constructed to the requirements of other standards is permitted (e.g. in mode 1 and mode 2). Such standardized accessories may be used for those situations (mode and case) identified in IEC 61851-1:2010. This standard can be used as a guide for accessories with a lesser number of contacts and lower ratings for use with light duty vehicles."
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
- ICS
- 29.120.30;43.040.10;43.120
- CCS
- S81
- 发布
- 2011-10
- 实施
- 2014-06-25
This standard applies to plugs@ socket-outlets@ vehicle connectors and vehicle inlets with pins and contact-tubes of standardized configurations@ herein referred to as accessories. They have a nominal rated operating voltage not exceeding 500 V a.c.@ 50 to 60 Hz@ and a rated current not exceeding 63 A three-phase or 70 A single phase@ for use in conductive charging of electric vehicles. This standard covers the basic interface accessories for vehicle supply as specified in IEC 62196-1@ and intended for use in conductive charging systems for circuits specified in IEC 61851-1:2010. Electric vehicles covers all road vehicles@ including plug-in hybrid road vehicles (PHEV)@ that derive all or part of their energy from on-board batteries. NOTE 1 These accessories may provide a contact that can be used for the proximity contact function. These accessories are intended to be used for circuits specified in IEC 61851-1:2010 which operate at different voltages and frequencies and which may include ELV and communication signals. These accessories may be used for bidirectional energy transmission (under consideration). This standard applies to the accessories to be used in an ambient temperature of between ?C 30 ??and + 50 ?? NOTE 2 In the following country@ other requirements may apply: FI. These accessories are intended to be connected only to cables with copper or copper-alloy conductors. Vehicle inlet and vehicle connector to this standard are intended to be used for charging in modes 1@ 2 and 3@ cases B and C. The socket-outlets and plugs covered by this standard are intended to be used for charging mode 3 only@ case A and B. The modes and permissible connections are specified in Part 1.
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
- ICS
- 29.120.30;43.040.10;43.120
- CCS
- S81
- 发布
- 2011-10
- 实施
- 2016-02-29
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1 : protective provisions against electric shock.
- ICS
- 29.280
- CCS
- S81
- 发布
- 2011-08-01
- 实施
- 2011-08-27
Railway applications - Fixed installations - Traction transformers; German version EN 50329:2003 + A1:2010, Corrigendum to DIN EN 50329 (VDE 0115-329):2011-02
- ICS
- 29.180;29.280
- CCS
- S81
- 发布
- 2011-04
- 实施
Railway applications - Fixed installations - Traction transformers; German version EN 50329:2003 + A1:2010
- ICS
- 29.180;29.280
- CCS
- S81
- 发布
- 2011-02
- 实施
- 2011-02-01
Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access); German version EN 50367:2006, Corrigendum to DIN EN 50367 (VDE 0115-605):2006-11; German version CENE
- ICS
- 29.280;45.060.10
- CCS
- S81
- 发布
- 2010-11
- 实施
Railway applications - Supply voltages of traction systems; German version EN 50163:2004, Corrigendum to DIN EN 50163 (VDE 0115-102):2005-07; German version CENELEC-Cor.:2010 to EN 50163:2004
- ICS
- 29.280
- CCS
- S81
- 发布
- 2010-11
- 实施
Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability; German version EN 50388:2005, Corrigendum to DIN EN 50388 (VDE 0115-606):2006-
- ICS
- 29.280;45.060.01
- CCS
- S81
- 发布
- 2010-11
- 实施
Railway applications - Fixed installations - Traction transformers; German version EN 50329:2003, Corrigendum to DIN EN 50329 (VDE 0115-329):2003-09; German version CENELEC-Cor.:2006 to EN 50329:2003
- ICS
- 29.180;29.280
- CCS
- S81
- 发布
- 2010-11
- 实施
Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2002/A2:2007, Corrigendum to DIN EN 50317/A2 (VDE 0115-503
- ICS
- 29.280;45.060.10
- CCS
- S81
- 发布
- 2010-11
- 实施
This European Standard specifies the general assembly characteristics which are to be applied to pantographs, to enable current collection from the overhead contact line system. It also specifies the tests the pantographs have to perform, excluding insulators. This European Standard is not applicable to pantograph dielectric tests, which are to be performed on the pantograph installed on the vehicle roof. If no other requirement is agreed between customer and supplier, insulation coordination according to EN 50124-1 may be used. This European Standard is not applicable to pantographs used on isolated metros and light rail systems. These pantographs are considered in EN 50206-2.
Railway applications. Rolling stock. Pantographs: Characteristics and tests. Part 1: Pantographs for main line wehicles
- ICS
- 29.280
- CCS
- S81
- 发布
- 2010-09-30
- 实施
- 2010-09-30
This Technical Specification covers requirements for electric pumps which generate the circulation of insulation liquid in traction transformers and reactors of rail vehicles and their associated cooling system. The pumps covered by this Technical Specification are rotodynamic pumps driven by a squirrel cage induction motor which is immersed in the insulating liquid. CLC/TS 50537-2 gives consideration to both technical and normative requirements of the railway environment and restricts the variety provided by industry-wide standards for pumps (for example EN 50216-7 and EN ISO 9906). It determines requirements and tests enabling the interchangeability especially regarding electrical, mechanical and hydraulic interfaces. Furthermore, service conditions are described.
Railway applications - Mounted parts of the traction transformer and cooling system - Pump for insulating liquid for traction transformers and reactors
- ICS
- 23.080;29.180;45.060.01
- CCS
- S81
- 发布
- 2010-07-31
- 实施
- 2010-07-31
本标准规定了铁路综合接地系统测量方法的术语和定义、一般性规定、土壤电阻率测量方法、独立接地体接地电阻测量方法、铁路综合接地系统电气完整性测量方法、铁路综合接地系统接地阻抗测量方法、场区地表电位梯度、跨步电压和接触电压测量方法、铁路综合接地系统轨道电位和设备电位测量方法。
Measurement method for railway integrated grounding system
- ICS
- 29.280
- CCS
- S81
- 发布
- 2010-06-26
- 实施
- 2010-12-01
This Technical Specification covers requirements for centrifugal and peripheral electric pumps which generate the circulation of cooling liquid in converters of rail vehicles and their associated cooling system. The pumps covered in this Technical Specification are rotodynamic pumps driven by canned motors or magnetically coupled motors. CLC/TS 50537-3 gives consideration to both technical and normative requirements of the railway environment and restricts the variety provided by industry-wide standards for pumps (for example EN 50216-7, EN 733 and EN ISO 9906). It determines requirements and tests enabling the interchangeability especially regarding electrical, mechanical and hydraulic interfaces. Furthermore, service conditions are described.
Railway applications - Mounted parts of the traction transformer and cooling system - Water pump for traction converters
- ICS
- 23.080;29.180;45.060.10
- CCS
- S81
- 发布
- 2010-04-30
- 实施
- 2010-04-30
