T04 基础标准与通用方法 标准查询与下载

EN ISO 18541-1:2014 道路车辆.标准化汽车维修保养信息(RMI).第1部分:一般信息和用例定义(ISO 18541-1:2014)

Dieser Teil der Norm enthält allgemeine Informationen und Strukturen der einzelnen Teile der Normenreihe. Außerdem werden Anwendungsfälle in Bezug auf Systeme für Reparatur- und Wartungsinformationen (RMI) festgelegt, die der Standardisierung des Zugangs auf RMI durch unabhängige Marktteilnehmer dienen. Dieser Teil der Norm beschreibt die auf den standardisierten Zugang zu RMI zutreffenden Anwendungsfälle. Die Anwendungsfälle spiegeln reale Szenarien wider (z. B. bei der Instandhaltung von Fahrzeugen), der für den Zugang zu Informationen erforderlich ist, um Pannenhilfe, Untersuchungen, Diagnose, Reparaturen und Wartungen, sowie die Neuprogrammierung und Ersatz elektronischer Steuergeräte (ECUs), durchzuführen. RMI-Systeme, die vom Personal für die Durchführung von Instandhaltungsleistungen verwendet werden, bestehen aus: - einem webbasierten System, das Zugang zu RMI gewährt, die für die Durchführung von Instandhaltungsleistung(en) erforderlich ist (sind); - liefert spezifische RMI-Kontaktinformationen; - einem Sicherheitsrahmen, mit dem der Zugang zu diebstahlrelevanten RMI geschützt wird. Dieser Teil der Norm gibt einen Überblick über die gesamte Norm und deren Anwendung auf die Automobilindustrie. Dieser Teil der Norm gilt für leichte Personenkraftwagen und Nutzfahrzeuge, wie in der Verordnung (EG) 715/2007, Art. 2 festgelegt.

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 1: General information and use case definition

BS PD ISO/TS 18571:2014 道路车辆. 非模糊信号的客观评价指标

Road vehicles. Objective rating metric for non-ambiguous signals

SAE J2880-2014 推荐绿色比赛协议

These Protocols can be used for all forms of motorsports; however, only certain combinations of Green Racing Elements will result in motorsport competitions that are recognized as Green Racing events. As new information, fuels and technologies emerge, addendums or new protocols will be developed. The SAE International (SAE) Motorsports Engineering Activity is also an invaluable source of reference materials and ongoing technical advice providing access to the constantly evolving set of best safety and operational practices for current and emerging technologies. This is especially true with regard to high voltage safety and the adoption of other advanced pro

Recommended Green Racing Protocols

DIN 72552-4:2014 汽车用终端标记.第4部分:一览表

Terminal markings for motor vehicles - Part 4: Summary

SAE J1531-2014 接缝损坏的试验程序

This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.

Seam Damage Test Procedure

SAE J1060-2014 与机动车轮胎有关的乘坐舒适特性和噪音评价的主观等级评价

This SAE Recommended Practice establishes a rating scale for subjective evaluations of noise and discomfort in motor vehicles. Through test procedures utilizing specific vehicles on specific roads, the scale may be utilized to assess the relative contributions of tires to noise and discomfort. The noise and ride comfort characteristics attributed to automotive tires have traditionally been estimated by subjectively assigning number designations (commonly on a 1 to 10 scale) to the audible and tactile sensations observed while traversing a given road course in a vehicle equipped with the tires under evaluation. Regardless of advances in objective measurement

Subjective Rating Scale for Evaluation of Noise and Ride Comfort Characteristics Related to Motor Vehicle Tires

SAE J57-2014 公路卡车轮胎的声级

This procedure provides for the measurement of the sound generated by a test tire, mounted on a single-axle trailer, operated at multiple speeds. The procedure describes test practices for both United States and International practices. Specifications for the instrumentation, the test site, and the operation of the test apparatus are set forth to minimize the effects of extraneous sound sources and to define the basis of reported sound levels.

Sound Level Of Highway Truck Tires

QC/T 966-2014 汽车塑料件涂层技术条件

本标准规定了汽车塑料件涂层的分类、技术要求和试验方法。本标准适用于具有装饰性和/或防护性的汽车内装塑料件、外装塑料件和发动机舱内塑料件的涂层,标准紧固件和卡扣等小型塑料件的涂层可参照使用。

Coating technical conditions for automotive plastic parts

EN ISO 18542-2:2014 道路车辆.标准化的修理和维护信息(RMI)术语.第2部分:标准化流程实现要求,注册机构(ISO 18542-2:2014)

ISO 18542 ist in zwei Teile untergliedert: Teil 1 "General information and use case definition" - in diesem Teil sind ein Rahmen und ein Prozess fur die Festlegung von Benennungen festgelegt; Teil 2 "Standardized process implementation requirements, Registration authority" - in diesem Teil werden die Anforderungen an die Prozessimplementierung fur ein Terminologiemanagementsystem und fur eine Registrierungsstelle mit einem digitalen Anhang festgelegt. Der Hauptzweck der Normenreihe ISO 18542 ist es, unabhangige Marktteilnehmer bei der Suche auf RMI-Websites von Fahrzeugherstellern zu unterstutzen. Dieser Teil der ISO 18542 legt fest: die technischen Anforderungen, die von dem Terminologiemanagementsystem [TMS] erfullt werden mussen, das fur die Verwaltung und Speicherung der festgelegten RMI-Terminologie eingesetzt wird; die Anforderungen an die Registrierungsstelle [RA] (d. h. die Stelle, die fur die Pflege und Veroffentlichung der festgelegten RMI-Terminologie verantwortlich ist); Der Rahmen und der Prozess fur die Erarbeitung festgelegter Terminologie ist Gegenstand von ISO 18542-1. Die Zielgruppe dieses Teils von ISO 18542 sind technische Fachkrafte, insbesondere jene, die fur die Implementierung des Mandats M/421 verantwortlich sind.

Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements@ Registration Authority

ISO 18542-2:2014 道路车辆. 标准化维修与维护信息(RMI)术语. 第2部分: 标准化过程实施要求, 注册机构

— Part 1: General information and use case definition: defines a framework and a process for agreeing terms — Part 2: Standardized process implementation requirements, Registration Authority: defines the process implementation requirements for a Terminology Management System and for a Registration Authority with a Digital Annex. The purpose of the ISO 18542 series is to facilitate searching by Independent Operators (IOs) of Vehicle Manufacturer (VM) Repair and Maintenance Information (RMI) websites. This part of ISO 18542 specifies: — the technical requirements that must be met by the Terminology Management System (TMS) that will be used to manage and store the ‘Agreed RMI Terminology’; — the requirements for the Registration Authority (RA) (i.e. the agency responsible for maintaining and publishing the ‘Agreed RMI Terminology’). The framework and process for creating ‘Agreed Terminology’ is the subject of ISO 18542-1. The target audience for this part of ISO 18542-2 is a technical one, and focused on those responsible for the implementation of mandate M/421.

Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 2: Standardized process implementation requirements, Registration Authority

SAE J1113/4-2014 辐射电磁场抗扰性体电流注入(BCI)法

This SAE Standard defines a method for evaluating the immunity of automotive electrical/electronic devices to radiated electromagnetic fields coupled to the vehicle wiring harness. The method, called Bulk Current Injection (BCI), uses a current probe to inject RF onto the wiring harness in the frequency range of 1 to 400 MHz. BCI is one of a number of test methods that can be used to simulate the electromagnetic field.

Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method

ISO 10605:2008/Amd 1:2014 道路车辆. 静电放电引起电气干扰的试验方法; 修改件1

Road vehicles - Test methods for electrical disturbances from electrostatic discharge; Amendment 1

ISO/TS 18506:2014 碰撞试验中道路使用者保护评价的构建伤害风险曲线规程

Procedure to construct injury risk curves for the evaluation of road user protection in crash tests

KS R 0098-2013 汽车排放的大气污染物质控制术语

Glossary of terms relating to control of air pollutions from automobiles emissions

KS R 0097-2013 汽车主要系统术语

Glossary of terms relating to main systems of automobiles

KS R ISO 12097-2:2013 道路车辆.安全气囊零部件.第2部分:安全气囊模块试验

이 표준은 도로 차량용 에어백 모듈을 위한 시험방법을 규정하며, 환경적인 절차와 요구조건에 대하여 명시한다.KS R ISO 12097-3은 인플레이터 어셈블리의 시험을 다룬다.

Road vehicles ― Airbag components – Part 2: Testing of airbag modules

BS ISO 14229-5:2013 道路车辆. 统一诊断服务 (UDS). 互联网协议实施的统一诊断服务 (UDSonIP)

Road vehicles. Unified diagnostic services (UDS). Unified diagnostic services on Internet Protocol implementation (UDSonIP)

ISO/TR 10982:2013 道路车辆.评估发生位移的车辆乘员与展开气囊的相互影响的试验规程

This Technical Report outlines a number of test procedures that can be used for investigating the interactions that could occur between the deploying air bag and the occupant who is near the module at the time of deployment. Static and dynamic tests to investigate both driver and passenger systems are described. Comparative evaluation of the designs can be conducted using static tests. Favourable systems may be evaluated, if deemed necessary, by appropriate dynamic tests. Children and infants restrained in child or infants seats are the subject of another Technical Report.

Road vehicles.Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags

ISO 23828:2013 燃料电池道路车辆.能量消耗测量.供以压缩氢燃料的车辆

This International Standard specifies the procedures for measuring the energy consumption of fuel cell passenger cars and light-duty trucks that use compressed hydrogen and which are not externally chargeable.

Fuel cell road vehicles.Energy consumption measurement.Vehicles fuelled with compressed hydrogen

KS R ISO 12021-1:2013 道路车辆.外部风压敏感度.第1部分:利用风力发送进行的开放回路试验方法

Road vehicles－Sensitivity to lateral wind－Part 1：Open-loop test method using wind generator input