共找到 861 条与 车身(驾驶室)及附件 相关的标准,共 58 页
This document specifies the criteria for judgement of usability of child restraint systems (CRS) when installing them with the vehicle seat belts. This document provides criteria for judgement of: — ease of availability of instructions; — clarity of instruction manual and labelling; and — ease of use of design related features of the CRS related to the installation in a vehicle. NOTE Booster system usability evaluation is covered by ISO 29061-5.
Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 3: Installation of child restraint systems using vehicle seat belts
This document provides criteria for judgement of usability of booster seat child restraint systems (CRS) when installing them and securing a child. The document provides criteria for judgement of: — ease of availability of instructions; — clarity of instruction manual and labelling; and — ease of use of design related features of the CRS related to the installation in a vehicle. The procedure can also be used for evaluation of vehicle integrated booster systems. NOTE Although ISOFIX is defined in the original “ISOFIX” standard (ISO 13216-1) to be a rigid system, the term “ISOFIX” in this document is extended to include flexible CRS attachments (LATCH, UAS).
Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 5: Installation and securing of child in a booster system
Road vehicles - Child seat presence and orientation detection system (CPOD) - Part 3: Labelling
Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017); German version EN ISO 8936:2017
Awnings for leisure accommodation vehicles. Requirements and test methods
Fingerprint identification device for automobiles
Automobile cab torsion bar flipping and locking mechanism
This document specifies requirements, test methods and material performance characteristics for vehicle awnings. It applies to awnings intended to be pitched and struck. This document is not applicable to: a) sun awnings: structure detachable from the vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow; NOTE 1 A sun awning can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document. b) external blinds: structure permanently fixed to a vehicle which is used to provide shelter from the sun, but is not designed or constructed to provide shelter from wind, rain or snow; c) NOTE 2 An external blind can be used with additional front and side panels to form an enclosure, but this enclosure would not meet the requirements of an awning as defined in this document. fixed awnings: permanent awning which is not designed for mobile use. EXAMPLE Awnings equipped with square aluminium frames or timber supporting structures and the possibility to install living compartment windows and doors.
Awnings for leisure accommodation vehicles - Requirements and test methods
Road vehicles. Tests for rigid plastic safety glazing materials
Road vehicles. Pedestrian protection. Head impact test method
Road vehicles - Pedestrian protection - Head impact test method
Road vehicles. Safety glazing materials. Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
Technical requirements for inspection of restraint systems for child occupants of imported and exported motor vehicles
本标准规定了挂车空气悬架总成(以下悬架总成)的术语和定义、分类及基本参数、要求、试验方法、检验规则和标志、使用说明书、包装、运输、贮存。 本标准适用于由前支架、导向臂、减震器、空气弹簧等零部件组成的挂车空气悬架总成(不包含悬架控制系统),其它结构的总成也参照使用。
Trailer Air Suspension Assembly Specifications
Road vehicles - Determination of resistance to forced entry of security glass constructions used in vehicle glazing - Test of glazing systems
Road vehicles. Safety glazing materials. Test methods for properties of electrically heated glazing
Road vehicles - Safety glazing materials - Test methods for properties of electrically heated glazing
本标准规定了乘用车门内饰板总成的要求、试验方法、检验规则及标志、包装、运输、储存。本标准适用于由各种材料通过成型工艺制成的乘用车门内饰板总成,但不适用于安装于其上的操纵件或电气件。
Door trim panel assembly for passenger cars
本标准规定了汽车用前照灯清洗喷嘴总成的术语和定义、技术要求、试验方法、检验规则及标志、包装、运输和储存。 本标准适用于汽车用前照灯清洗喷嘴总成。
Headlamp cleaning nozzle assembly
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号