T33 润滑件、密封件、联接件 标准查询与下载

SAE J1692-1993 阀座密封圈信息报告.信息报告代替Ford ESE-M1A106-A,ESE-M1A122–A

This SAE Information Report provides engineers and designers with: a. types of valve seat inserts and their nomenclature; b. valve seat insert alloy designations and their chemistries; c. valve seat insert alloy metallurgy; d. typical mechanical and physical properties of insert alloys; e. recommended interference fits; f. installation procedures; and g. application considerations.

Valve Seat Insert Information Report, Information Report Supersedes Ford ESE-M1A106-A, ESE-M1A122-A

JIS D 2609:1993 道路车辆用液压盘形制动器的橡胶密封件

Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid

ANSI/SAE J654-1993 固定和往复式弹性材料传动装置密封件

Static and Reciprocating Elastomeric Transmission Seals

DIN 71501:1992 汽车用椭圆形法兰

The dimensions and materials are given.

Oval flanges for motor vehicles

SAE J1605-1992 制动主缸储液室垫圈

This standard covers performance requirements and methods of test for master cylinder reservoir diaphragm gaskets that will provide a functional seal and protection from outside dirt and water.

Brake Master Cylinder Reservoir Diaphragm Gasket

JIS D 2301:1990 汽车用叉型配件

この規格は，自動車用クレビス継手に用いるクレビス(めねじ式)，クレビスピン及びアィ(以下，クレビス継手部品という。)について規定する。

Clevis fitting parts for automobiles

NF R12-780:1989 道路车辆.连接辅助设备.连接尺寸

Road vehicles. Additional for grip. Overall dimensions.

NF R17-110:1988 道路车辆.卡车后横架机械连接装置安装

Road vehicles. Mounting of mechanical coupling devices on rear cross members of trucks.

DIN ISO 8719:1988 商用车辆和客车.齿轮传动的空气压缩机用的四孔法兰盘

The flanges are used for mounting compressors on reciprocating internal combustion engines for commercial vehicles and buses.

Commercial vehicles and buses; four-hole flanges for gear-driven air compressors; identical with ISO 8719, edition 1986

DIN ISO 7647:1987 商用车辆和汽车.齿轮箱法兰.S型.与ISO 7647, 1986版相同

The standard specifies the dimensions necessary for the interchangeability of gear box flanges type S on commercial vehicles.

Commercial vehicles and buses; gearbox flanges; type S; identical with ISO 7647, edition 1986

DIN ISO 7646:1987 商用车辆和汽车.齿轮箱法兰.A型. 与ISO 7646, 1986版相同

The standard specifies the dimensions necessary for the interchangeability of gear box flanges type A on commercial vehicles.

Commercial vehicles and buses; gearbox flanges; type A; identical with ISO 7646, edition 1986

ISO 8755:1986 商用车辆.牵引车辆和挂车之间机械连接.40mm牵引杆连接器

Commercial road vehicles; Mechanical connections between towing vehicles and trailers; 40 mm drawbar coupling

ISO 1102:1986 商用道路车辆.牵引车和挂车之间的机械连接.直径50mm的牵引杆连接器

Commercial road vehicles; Mechanical connections between towing vehicles and trailers; 50 mm drawbar couplings

ISO 7646:1986 商用车辆和公共汽车 齿轮箱法兰 A型

Specifies the nominal dimensions and tolerances which affect the interchangeability between gearbox flanges and mating parts used on commercial vehicles and buses. The flanges type A are not interchangeable with type S flanges dealt with in ISO 7647. Some figures illustrate shapes and reference quantities of concern.

Commercial vehicles and buses; Gearbox flanges; Type A

ISO 7647:1986 商用车辆和公共汽车 齿轮箱法兰 S型

Specifies the nominal dimensions and tolerances which affect the interchangeability between gearbox flanges and mating parts used on commercial vehicles and buses. The flanges type S are not interchangeable with type A flanges dealt with in ISO 7646. Some figures illustrate shapes and reference quantities of concern.

Commercial vehicles and buses; Gearbox flanges; Type S

ISO 8719:1986 商业用车辆和公共汽车.齿轮传动空气压缩机用四孔法兰盘

Commercial vehicles and buses; Four-hole flanges for gear-driven air compressors

ISO 7632:1985 道路车辆 使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫圈(最高工作温度120℃)

Specifies the performance test methods and requirements for seals used in disc brake cylinders. Applies to solid section type seals (square, rectangular,'O'-ring) mounted stationary in the cylinder bore or on the movable piston of disc brakes. Describes the apparatus, preparation of specimens, and test procedures; lists test requirements.

Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 7630:1985 道路车辆 使用石油基液压制动液的鼓式制动轮缸的弹性O形密封圈(最高工作温度120℃)

Specifies the performance test methods and requirements for elastomeric O-rings used in brake wheel cylinders. Applies to solid O-ring seals mounted stationary in the cylinder bore or on the movable piston of drum brakes. These seals shall be suitable for operation in a temperature range of -40 to +120 鳦.

Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

ISO 7631:1985 道路车辆 使用石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封垫圈(最高工作温度120℃)

Specifies performance tests of brake cups and seals for braking systems. Requirements relating to chemical composition, tensile strength and elongation of the rubber compound are not included. Applies to moulded seals (cups or double-lipped type gland seals), 60 mm in diameter or less, compounded from high temperature resistant rubber.

Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)

DIN 3761-1:1984 汽车用唇型旋转轴密封件.第1部分:术语、公式符号、公差

Rotary shaft lip type seals for automobils; terms, formula symbols, tolerances

Rotary shaft lip type seals for automobils; terms, formula symbols, tolerances