T38 照明与信号设备 标准查询与下载

ANSI/UL 234-2012 供游乐车辆使用的低压照明装置的安全性标准

The following changes in requirements to the Standard for Low Voltage Lighting Fixtures for Use in Recreational Vehicles, UL 234, are being proposed: 1. New Paragraph 1.3 to include reference to UL 8750 for requirements for LED components and subassemblies 2. Editorial correction to add Fahrenheit equivalent in 28.3(b)

Standard for Safety for Low Voltage Lighting Fixtures for Use in Recreational Vehicles

SAE J572-2011 建筑和工业机器密封照明装置要求

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Standard applies to 145 mm nominal headlamp and floodlamp units. To define the dimensional requirements for sealed lighting units and assure their interchangeability.

Requirements for Sealed Lighting Unit for Construction and Industrial Machines

SAE J1957-2011 全宽小于2032 mm的车辆中央高位刹车灯

This SAE Standard provides test procedures, performance requirements, and guidelines for center high mounted stop lamps (CHMSL) for use on vehicles less than 2032 mm in overall width.

Central High Mounted Stop Lamp Standard for Vehicles Less than 2032 mm Overall Width

SAE J588-2011 总宽度小于2032 mm的机动车辆上使用的转向指示灯

This SAE Standard provides test procedures, requirements, and guidelines for turn signal lamps intended for use on vehicles of less than 2032 mm in overall width.

Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width

SAE J2498-2011 应急车辆使用的报警灯系统最低性能

This SAE Recommended Practice provides test procedures, requirements, and guidelines for the system of optical warning devices used on emergency vehicles.

Minimum Performance of the Warning Light System Used on Emergency Vehicles

ISO 2575:2010/Amd 1:2011 公路用车.控制装置,指示灯与指示装置用符号;修改件1

Road vehicles - Symbols for controls, indicators and tell-tales; Amendment 1

DIN 14642:2011 车辆用带安装设备的防爆型便携式探照灯

Portable searchlight with mounting equipment for vehicles, explosion-proof

SAE J1889-2011 发光二极管信号和标识照明装置

This SAE Recommended Practice applies to functions of motor vehicle signalling and marking lighting devices which use light emitting diodes (L.E.D.'s) as light sources.This report provides test methods,requirements,and guidelines applicable to the special characteristics of L.E.D lighting devices.This Recommended Practice is in addition to those require for device designed with incandescent light sources.This report is intended to be a guide to standard practice and is subject to change to reflect additional experience and technical advances.

L.E.D. Signal and Marking Lighting Devices

SAE J573-2011 信号和标识光源

Most signal and marking lighting devices have light sources (bulbs), which can be based on either filament or LED technology. To assure field replacement, it is important that light source types employed be readily available in normal service channels. This document defines the physical, electrical, and photometric characteristics necessary to achieve a proper replacement for popular types of signal and marking light sources. Some of the design characteristics in this document are listed solely for the sake of standardization and are not intended to describe the performance of lighting devices (lamp assemblies) on the vehicle.

Signal and Marking Light Sources

SAE J586-2011 总宽度小于2032 mm的机动车辆上使用的停止灯具

This SAE Standard provides test procedures, requirements, and guidelines for stop lamps intended for use on vehicles of less than 2032 mm in overall width.

Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width

SAE J887-2011 校车警示灯

This document provided design guidelines, test procedure references, and performance requirements for red and yellow overhead devices on school bus vehicles which are used to alert traffice to stop when passengers are loading and unloading.

School Bus Warning Lamps

JIS D 0032 ERRATUM 1:2011 勘误表

ERRATUM

JIS D 0032:2011 道路车辆.控制装置,指示仪,信号装置的符号

Road vehicles -- Symbols for controls, indicators and tell-tales

SAE J974-2011 农业设备用闪光警报灯

This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for agricultural equipment.

Flashing Warning Lamp for Agricultural Equipment

SAE J280-2011 雪上汽车的前照灯

This standard provides test methods and requirements for snowmobile headlamps.

Snowmobile Headlamps

SAE J278-2011 雪上汽车刹车灯

This document provides test methods and requirements for the stop lamp on snowmobiles.

Snowmobile Stop Lamp

SAE J279-2011 雪上汽车尾灯(后位灯)

The SAE document provides test methods and requirements for tail lamps for snowmobiles.

Snowmobile Tail Lamp (Rear Position Lamp)

SAE J99-2011 高速公路上工业设备的照明和标志

To provide specifications for lighting and marking of industrial wheeled equipment whenever such equipment is operated or traveling on a highway.

Lighting and Marking of Industrial Equipment on Highways (Stabilized Type)

SAE J583-2011 前雾灯

This SAE Standard provides test procedures, performance requirements, design guidelines and installation guidelines for front fog lamps. RATIONALE: Updated section 6.4 Color to esclude the color between white and selective yellow to harmonize with ECE R19. Changed from.....shall be white to selective yellow....to.....shall be white or selective yellow.

Front Fog Lamps

SAE J581-2011 辅助远光灯

This SAE Standard provides test procedures, performance requirements and guidelines for auxiliary high beam lamps.

Auxiliary High Beam Lamps (Stabilized Type)