T42 客车 标准查询与下载

ANSI/ILTVA Z135-2012 客运车辆标准.安全和性能规范

This standard provides safety and performance specifications relating to personal transport vehicles, (PTVs), driven by electric motors or internal combustion engines to be operated on designated roadways, or within a closed community where permitted by law or by regulatory authority rules. This standard does not apply to golf cars, which are covered by ANSI Z130.1.

Standard for Personal Transport Vehicles - Safety and Performance Specifications

QC/T 474-2011 客车平顺性评价指标及限值

本标准规定了客车在随机输入行驶工况下的平顺性评价指标及其限值。 本标准适用于M、M类汽车（不含卧铺客车）。

Buses-ride comfort-evaluation value and limits

ISO 14792:2011 道路车辆.重型商用车辆和公共汽车.稳态循环试验

This International Standard specifies tests for determining the steady-state directional control response of heavy vehicles, one of the factors composing vehicle dynamics and road-holding properties. It is applicable to heavy vehicles, i.e. commercial vehicles, combinations, buses and articulated buses as defined in ISO 3833, covered by Categories M3, N2, N3, O3, and O4 of UNECE (United Nations Economic Commission for Europe) and EC vehicle regulations. These categories pertain to trucks and trailers with a maximum mass above 3,5 t and to buses and articulated buses with a maximum mass above 5 t.

Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests

ISO 3888-2:2011 乘用车.车道急剧改变操纵用试验车道.第2部分:故障免除

This part of ISO 3888 defines the dimensions of the test track for a closed-loop, severe lane-change manoeuvre test for subjectively determining the obstacle avoidance performance of a vehicle, one specific part of vehicle dynamics and road-holding ability. It is applicable to passenger cars as defined in ISO 3833 and light commercial vehicles up to a gross vehicle mass of 3,5 t.

Passenger cars - Test track for a severe lane-change manoeuvre - Part 2: Obstacle avoidance

CJ/T 339-2010 快速公共汽车交通（BRT）公共汽车通用技术要求

本标准规定了用于快速公共汽车交通（BRT）（以下简称快速公交）的公共汽车术语和定义、缩略语、分类、要求和试验方法。 本标准适用于车长大于10m、小于等于18m的快速公交公共汽车。

General technical requirements of bus rapid transit(BRT)

SAE J2258-2010 轻型公共车辆

This SAE Standard defines safety requirements relating to the elements of design, operation, and maintenance of light utility vehicles. The safety specifications in this document apply to any self-propelled, operator- controlled, off-highway vehicle 1828 mm (72 in) or less in overall width, exclusive of added accessories and attachments, operable on three or more wheels, primarily intended to transport material loads or people, with a gross vehicle weight of 2500 kg (5500 lb) or less, and a maximum design speed less than 40 km/h (25 mph). This document is not intended to cover Go-Karts (ASTM F2007-07a), fun-Karts (ASTM F2011-02e1), Dune buggies, and all terrain vehicles (ATVs) complying with ANSI/SVIA 1.

Light Utility Vehicles

CJ/T 350-2010 电动公共汽车通用技术条件

本标准规定了电动公共汽车的术语和定义、型号编制、基本要求、车辆专用底盘、车身、车辆管理系统与安全设施、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于车长大于或等于7m，小于或等于18m的电动公共汽车。

General specifications for battery electric bus

JT/T 325-2010 营运客车类型划分及等级评定

本标准规定了营运客车类型、等级划分及评定内容、规则和要求。 本标准适用于经营性旅客运输的客车，是交通运输管理部门对其评级的依据。

Type dividing and class rating for commercial motor-vehicles of passenger transport

QC/T 633-2009 客车座椅

本标准规定了客车座椅的术语、代号和定义、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于M、M类客车的座椅，本标准不适用于M、M类客车中A级和I级客车使用的塑料或木质成型座椅。

The seats of passenger vehicles

SANS 20052:2009 关于M2类和M3类小型公共运输车辆一般结构认证的统一规定

Applies to single-deck rigid vehicles of categories M2 and M3 designed and constructed for the carriage of seated or standing persons and having a capacity not exceeding 22 passengers in addition to the driver.

Uniform provisions concerning the approval of M2 and M3 small capacity vehicles with regard to their general construction

SANS 20036:2009 关于大型客车一般结构认证的统一规定

Applies to single-deck rigid or articulated vehicles that are designed and constructed for the carriage of persons, that have a capacity in excess of 22 passengers, whether seated or standing, in addition to the driver, and that have an overall width exc

Uniform provisions concerning the approval of large passenger vehicles with regard to their general construction

SANS 20107:2009 关于M2类和M3类车辆一般结构认证的统一规定

Applies to single-deck, double-deck, rigid or articulated vehicles of category M2 or M3. Does not apply to vehicles designed for the secure transport of persons, for example prisoners, vehicles specially designed for the carriage of injured or sick perso

Uniform provisions concerning the approval of category M2 or M3 vehicles with regard to their general construction

ISO 11012:2009 大型商用车辆和客车.沿中心驾驶的鉴定开环试验法.摇摆试验和转向试验

Heavy commercial vehicles and buses - Open-loop test methods for the quantification of on-centre handling - Weave test and transition test

DB31/T 306-2008 公交客车通用技术要求

General technical requirements for bus

DB11/T 532-2008 公共汽车通用技术条件

本标准规定了公共汽车术语和定义、分类、等级划分、要求，天然气公共汽车、无轨电车、快速交通公共汽车、社区公共汽车要求和等级评定规则。本标准适用于本市行政区域内车辆长大于6m的公共汽车。

General technical specifications for public city bus

VC 8023-2010 M2和M3类机动车的强制性规范

This specification covers the requirements for motor vehicle models of category M2 and M3, and minibuses, not previously registered or licensed in South Africa, designed or adapted for operation on a public road. NOTE: Except where stated otherwise, a se

Compulsory specification for motor vehicles of category M2 and M3

CJ/T 267-2007 混合动力电动城市客车

本标准规定了混合动力电动城市客车的术语和定义、型号编制规则、要求、试验方法、检验规则、标志、包装、运输及储存。 本标准适用于车长大于9m、小于等于18m的混合动力电动城市客车（以下简称混合动力客车）。

Hybrid electric city bus

SANS 569:2007 开敞客车

Specifies safety requirements for open-sided passenger vehicles that are converted from vehicles of categories M and N and that are designed or adapted for operation on a public road. It does not apply to conversions that retain the enclosed side, rear a

Open-sided passenger vehicles

QC/T 476-2007 客车防雨密封性限值及试验方法

本标准规定了客车防雨密封性限值及试验方法。 本标准适用于GB/T 3730.1-2001《汽车和挂车类型的术语和定义》规定的各类客车。由客车改装的专用车、具有驾驶室和封闭式车厢的汽车可参照执行。

Rain proof performance limit and test method for bus

JASO Z117-1-2007 道路车辆.车辆动态试验方法.第1部分:客车用通用条件

Road vehicles-Vehicle dynamics test methods-Part 1: General conditions for passenger cars