T61 拖拉机 标准查询与下载

JB/T 7734-2008 拖拉机防泥水密封性试验方法

本标准规定了拖拉机防泥水密封性试验方法。 本标准适用于轮式拖拉机和手扶拖拉机防泥水密封性试验，船式拖拉机及水田作业的履带拖拉机可参照执行。

Test procedures of slush seal performance of tractors

KS B 7944-2007 农产物干燥机试验方法

이 시험방법은 농ㆍ임산물(곡물은 제외한다.)의 건조에 사용하는 다음의 구조를 가진 농산물

Agricultural products dryer

KS B 7804-2007 农用拖拉机和机械.电力传输连接器

이 규격은 농업용 트랙터에서 12 V 전기를 작업기로 공급하는 소켓과 소켓에 연결되는 플러

Agricultural tractors and machinery－Electrical power transmission connectors

KS B 7852-2007 农业拖拉机牵引性能试验方法

testing method for drawbar performance of agricultural tractors

KS B 7851-2007 农业拖拉机动力输出轴性能试验方法

이 규격은 차륜형, 궤도형, 반궤도형 농업용 트랙터의 동력취출장치에 대한 성능 시험 방법을

Testing method for power take-off performance of agricultural tractors

KS B 7773-2007 农用拖拉机联结器尺寸

이 규격은 농업용 트랙터의 ⊂형 드로바에 대한 주요 치수와 위치를 규정한다.

⊂-type drawbar for agricultural tractors

KS B 7934-2007 农用拖拉机连接销

이 규격은 농림업용 트랙터(동력 경운기와 동력 관리기 포함)와 작업기를 연결하는 데 사용되

Connecting pins for agricultural and forestry tractors-Dimensions and requirements

KS B 7921-2007 农业拖拉机液压输出连接器主要尺寸

이 규격은 농업용 트랙터에서 부착 작업기로 유압 동력을 전달하는 데 사용되는 유압 커플러의

Agricultural tractors and machinery－General purpose quick-action hydraulic couplers

KS B 7774-2007 农用轮式拖拉机车轮安装尺寸

1.1 이 규격은 농업용 차륜형 트랙터 또는 기계의 차륜 부착부에 대한 치수를 규정한다.

Tractors and machinery for agriculture and forestry－Wheel-to-hub fixing dimensions

CSA M5000.1-07-CAN/CSA-2007 农业拖拉机—后置式动力输出轴1、2和3类型.第1部分:主挡板和余隙的一般规范、安全要求和尺寸.第1版本

Agricultural tractors ?Rear-mounted power take-off types 1, 2 and 3 ?Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone First Edition

Agricultural tractors ?Rear-mounted power take-off types 1, 2 and 3 ?Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone First Edition

CSA M5673-1-07-CAN/CSA-2007 农业拖拉机和机械—动力输出万向节传动轴和电源输入连接.第1部分:一般制造业和安全要求

Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the user of the Standard to judge its suitability for his or her particular purpose.

Agricultural tractors and machinery ?Power take-off drive shafts and powerinput connection ?Part 1: General manufacturing and safety requirements First Edition

CSA M5000.3-07-CAN/CSA-2007 农用拖拉机 后置式取力器 1、2 和 3 型 第3部分：取力器主要尺寸和花键尺寸、取力器位置 第一版

L.'ASSOCIATIO\ C.4X4l)ll'XSEI)E NORMAL.1- SATIOS (ACNOK). Saus les ;:uspices de laquelle cette Norme nationale u cil. Preparec. Recut ses lettres patentes en 1919 et son acb*rcdii:ition ali sein du Systeme de nornies nationales p;ir IC Conseil canadie

Agricultural tractors - PTOs mounted - rear of types 1, 2 and 3 - Part 3: Main dimensions of the PTO and dimensions of the splines, location of the PTO first edition

CSA M5673-2-07-CAN/CSA-2007 农业拖拉机和机械—动力输出万向节传动轴和电源输入连接.第2部分.功率输出万向节传动轴的使用位置及间隙的规范

This Standard applies to those structures and components in CANDU nuclear power plants which require seismic qualification by analytical methods (see CSA Standard CAN3-N289.1, General Requirements for Seismic Qualification of CANDU Nuclear Power Plan

Agricultural tractors and machinery ?Power take-off drive shafts and power-input connection ?Part 2: Specification for use of PTO drive shafts, and position and clearance of PTO drive line and PIC for various attachments First Edition

CSA M5000.2-07-CAN/CSA-2007 农用拖拉机 安装式动力输出装置 1、2和3型后部 第2部分：拖拉机 窄轨、防护罩和间隙区域的尺寸

Agricultural tractors ?Rear-mounted power take-off types 1, 2 and 3 ?Part 2: Narrow-track tractors, dimensions for master shield and clearance zone

Agricultural tractors - PTOs mounted - rear of types 1, 2 and 3 - Part 2: Tractors - narrow gauge, dimensions of protective shield and clearance area

CSA M6489-3-07-CAN/CSA-2007 农业车—吊车与拖曳车之间的机械连接.第3部分:拖拉机牵引板.第1版本

Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the user of the Standard to judge its suitability for his or her particular purpose.

Agricultural vehicles ?Mechanical connections between towed and towing vehicles ?Part 3: Tractor drawbar First Edition

JB/T 6000-2007 农林拖拉机斜坡工作适应性.静态试验方法

本标准规定了农林拖拉机在斜坡上其配套发动机保持正常工作能力的静态试验方法。 本标准适用于农林轮式和履带拖拉机。

Agricultural and forest tractor.Static test procedures on slope

NF U02-052-3:2006 高地隙拖拉机.倾斜稳定性和倾覆防护.第3部分:使用结构和信息

High-clearance tractors - Stability on slopes and protection in event of overturning - Part 3 : information and instructions for use.

JB/T 10651-2006 手扶拖拉机底盘

本标准规定了手扶拖拉机底盘的定义、技术要求、试验方法、检验规则、交货、标志、包装、运输与贮存。 本标准适用于各类手扶拖拉机底盘（以下简称底盘）。

Specifications of chassis of walking tractor

ISO 3463:2006 农林用轮式拖拉机.倾翻保护结构(ROPS).动态试验方法和验收条件

This International Standard specifies a dynamic test method and the acceptance conditions for roll-over protective structures (cab or frame) of wheeled tractors for agriculture and forestry. It is applicable to tractors having at least two axles for wheels mounted with pneumatic tyres, or having tracks insteads of wheels, with an unballasted tractor mass of not less than 600 kg, but generally less than 6000 kg, and with a minium track width of the rear wheels greater than 1150 mm.

Tractors for agriculture and forestry - Roll-over protective structures (ROPS) - Dynamic test method and acceptance conditions

ISO 5700:2006 农林用轮式拖拉机.倾翻保护结构(ROPS).静态试验方法和验收条件

This International Standard specifies a static test method and the acceptance conditions for roll-over protective structures (cab or frame) of agriculture and forestry. It is applicable to tractors having at least two axles for wheels mounted with pneumatic tyres, or having tracks instead of wheels, with an unballasted tractor mass of not less than 800 kg and a minimum track width of the rear wheels greater than 1150 mm.

Tractors for agriculture and forestry - Roll-over protective structures (ROPS) - Static test method and acceptance conditions