U06 船舶工艺 标准查询与下载

CB/T 4208-2013 船体分段肋板拉入法工艺要求

本标准规定了船体分段肋板拉入法工艺的人员、操作前准备、工艺要求和检验等。本标准适用于5万吨级以上油船和散货船,基准面平直的双层底、舷侧、上下边水舱等的非水密肋板、肋骨框的安装。其他船型可参照执行。

Technology requirements for floor pull-in method

CB/T 4224-2013 船舶推进系统零部件表面光整加工技术要求

本标准规定了船舶推进系统零部件(以下简称“零部件”)表面光整加工的术语和定义、一般要求、光整加工前准备、光整加工技术要求、检验方法、光整加工后处理等内容。本标准适用于船舶推进系统金属零部件表面精加工。

Technical requirements of surface finishing for ship propulsion system's parts

ISO 16145-4:2013 船舶和海洋技术.防护涂层和检验方法.第4部分:水溶性盐总量的自动测量方法

This part of ISO 16145 describes the characteristics of an automated measuring method by using a conductivity meter for the assessment of the total surface density of various water-soluble salts on steel surfaces prior to coating applications for dedicated sea water ballast tanks, void spaces of bulk carriers and oil tankers, and cargo oil tanks of crude tankers in compliance with PSPC stipulated by IMO Res. MSC.215(82), IMO Res.MSC.244(83), and IMO Res.MSC.288(87). This method describes a procedure for rapid evaluation of the surface of steel for the presence of ionic contamination by determining the total concentration of water-soluble ionic contaminants by means of a conductivity test. This method may be equivalent to ISO 8502-9:1998. NOTE 1 The individual surface densities of chlorides, sulphates, etc. cannot be determined by this method. This method assesses ionic contaminants only. These represent the greater part of the contamination. The ionic contaminants are thus considered as one single contaminant. NOTE 2 This method is used as an alternative measurement method for PSPC when demonstrated to comply with NACE SP0508:2010 as described in the footnote of PSPC regarding seawater ballast tanks in all types of ships and double-side skin spaces of bulk carriers and cargo oil tanks.

Ships and marine technology - Protective coatings and inspection method - Part 4: Automated measuring method for the total amount of water-soluble salts

BS ISO 16145-4:2013 船舶和海洋技术.防护涂层和检验方法.水溶性盐总量的自动测量方法

Ships and marine technology. Protective coatings and inspection method. Automated measuring method for the total amount of water-soluble salts

CB/Z 125-2012 潜艇船体结构焊接质量检验规则和质量分级

本标准规定了潜艇船体结构焊接的检查范围、检查方法、焊缝的质量评定和分级等要求。本标准适用于母材公称厚度为3 mm~100 mm的921A钢、922A钢、923钢、907A钢及980钢等材料的船体结构潜艇焊接质量检验和分级。用于潜艇建造的其他水下用耐压结构件可参照本标准。

Inspection regulation of welding quality for submarine hull structure and quality classification

DIN EN 16222:2012 船体阴极保护.德文版本EN 16222-2012

This European Standard defines the general criteria and recommendations for cathodic protection of immersed external ship hulls and appurtenances. This European Standard does not cover safety and environmental protection aspects associated with cathodic protection. Relevant national or international regulations and classification society requirements apply.

Cathodic protection of ship hulls; German version EN 16222:2012

BS ISO 30002:2012 船舶和海洋技术.船舶回收管理系统.船舶回收的筛选导则(及试算报表合同)

Ships and marine technology. Ship recycling management systems. Guidelines for selection of ship recyclers (and pro forma contract)

BS ISO 13073-1:2012 船舶和海洋技术.船舶防污系统的风险评价.船舶防污系统用生物活性物质的海上环境风险评价方法

Ships and marine technology. Risk assessment on anti-fouling systems on ships. Marine environmental risk assessment method of biocidally active substances used for anti-fouling systems on ships

KS V 0060-2012 船舶通风系统图形符号

이 표준은 주로 선박의 통풍 계통에 사용하는 그림 기호(이하 그림 기호라 한다.)에 대하여

Graphical symbols for ships ventilation system

BS EN 16222:2012 船体阴极保护

Cathodic protection of ship hulls

ISO 16145-2:2012 船舶和海洋技术.防护涂层和检验方法.第2部分:散货船和油轮孔隙空间

This part of ISO 16145 specifies a method of protective coatings and its inspection of void spaces of bulk carriers and oil tankers which are contracted and agreed to apply PSPC/VOID [IMO Res.MSC.244 (83)] for new building on or after 5 October 2007.

Ships and marine technology - Protective coatings and inspection method - Part 2: Void spaces of bulk carriers and oil tankers

ISO 30004:2012 船舶与海洋技术.船舶拆卸管理体系.执行ISO 30000标准的导则

This International Standard provides generic advice on the application of ISO 30000:2009. It explains the underlying principles of ISO 30000 and describes the intent, typical inputs, processes and typical outputs, for each requirement of ISO 30000. This is to aid in the understanding and implementation of ISO 30000. This International Standard does not create additional requirements to those specified in ISO 30000, nor does it prescribe mandatory approaches to the implementation of ISO 30000. NOTE Occupational health and safety issues may be included when an organization seeks to implement an integrated environmental and occupational health and safety management system.

Ships and marine technology - Ship recycling management systems - Guidelines for the implementation of ISO 30000

KS V ISO 30003:2012 船舶回收管理系统.船舶回收管理评估和认证机构的要求

? ??? ?? ??? ? KS V ISO 30000 ??? ?? ?? ??? ?? ???

Ships and marine technology-Ship recycling management systems-Requirements for bodies providing audit and certification of ship recycling management

KS V ISO 17338:2012 船舶与海洋技术.防火图纸.船只和高速舰船分类的消防等级标志

이 표준은 선박의 화재보호를 위한 온도 및 구조적 경계선(구획)의 화재 등급을 표시하는 도

Ships and marine technology-Drawings for fire protection-Indications of fire rating by divisions for ships and high-speed craft

CB 20031-2011 潜艇用高强度钢铸件补焊要求

本标准规定了潜艇用高强度钢铸件的补焊技术要求、补焊程序、无损检测和记录等。 本标准适用于潜艇用604、607、607A、QZ921和QZ685高强度钢铸件的补焊，水面舰艇及海洋工程应用该类高强度钢祷件补焊时也可参照执行。

Requirements for weld repair of high strength steel castings for the submarine

CB 20030-2011 舰船用钛及钛合金铸件补焊工艺要求

本标准规定了钛及钛合金铸件（简称铸件）补焊范围的确定、补焊前的准备、补焊方法和设备、补焊、补焊后处理、补焊后的检验、补焊记录等。 本标准适用于舰船用ZTA2、ZTA5、ZTi60、ZTA7、ZTC4及钛合金铸件的手工钨极氩弧焊补焊工艺。其他钛合金铸件的补焊也可参照使用。

Technical requirements of repair welding for titanium and tianium alloys cast used of naval ships

CB/T 4150-2011 船舶分段涂装前跟踪补涂工艺要求

本标准规定了船舶分段涂装前跟踪补涂的施工前准备、人员、施工环境、工艺流程、施工及检验等要求。 本标准适用于钢质船舶建造分段涂装前跟踪补涂作业。

Technology requirements of touch up before block painting for ship

CB/T 4125-2011 船舶压载舱涂层破损面积的评估与计算方法

本标准规定了船舶压载舱涂层破损的术语和定义、检查方法及涂层破损区域面积的评估与计算方法等。 本标准适用于满足国际海事组织（IMO）制定的《所有类型船舶专用海水压载舱和散货船双舷侧处所保护涂层性能标准》（英文缩写为PSPC）要求的船舶专用海水压载舱和散货船双舷侧处所涂装时涂层的破损面积评估与计算。其它船舶舱室涂装时涂层的破损面积评估与计算亦可参照执行。

Assessment and calculating method for damaged coatings area of ballast tanks for ship

CB/T 3558-2011 船舶钢焊缝射线检测工艺和质量分级

本标准规定了用于船舶钢焊缝射线检测的一般要求、技术等级、工艺条件、检测实施和焊缝质量分级。 本标准适用于母材厚度为2 mm～200 mm钢熔化焊对接接头的射线照相检测，为船舶制造提供的其他部件和成品钢焊缝的射线检测可参照本标准执行。

Ship steel weld radiographic testing technology and quality classification

CB/T 4127-2011 集装箱船舱口盖、绑扎桥和舷边支柱一体化安装工艺

本标准规定了集装箱船舱口盖、绑扎桥和舷边支柱一体化安装的基本要求、安装前的准备和安装顺序、安装工艺等。 本标准适用于集装箱船用舱口盖、绑扎桥和舷边支柱的安装和验收。

Incorporate fixing technics of hatch covers, platforms and deck-stanchions for container vessel