U06 船舶工艺 标准查询与下载

CB/T 4150-2011 船舶分段涂装前跟踪补涂工艺要求

本标准规定了船舶分段涂装前跟踪补涂的施工前准备、人员、施工环境、工艺流程、施工及检验等要求。 本标准适用于钢质船舶建造分段涂装前跟踪补涂作业。

Technology requirements of touch up before block painting for ship

CB/Z 254-2011 合同设计、详细设计和生产设计相互衔接的基本要求

本标准规定了船舶的合同设计、详细设计和生产设计三个设计阶段的主要内容，以及生产设计对合同设计、详细设计的图样和技术文件的要求。 本标准适用于按合同设计、详细设计和生产设计三个设计阶段划分的船舶产品设计。

Basic requirements of contract design,detailed design and production design interrelated

CB/T 4127-2011 集装箱船舱口盖、绑扎桥和舷边支柱一体化安装工艺

本标准规定了集装箱船舱口盖、绑扎桥和舷边支柱一体化安装的基本要求、安装前的准备和安装顺序、安装工艺等。 本标准适用于集装箱船用舱口盖、绑扎桥和舷边支柱的安装和验收。

Incorporate fixing technics of hatch covers, platforms and deck-stanchions for container vessel

CB/T 3559-2011 船舶钢焊缝超声波检测工艺和质量分级

本标准规定了船舶钢焊缝超声波检测的人员、设备和器材要求、方法和焊缝质量分级等。 本标准适用于母材厚度8 mm～150 mm的铁素体钢全熔透焊缝A型脉冲反射式手工接触的超声波检测，对于母材厚度为6 mm～＜8 mm的薄板，可参照本标准进行检测。 本标准不适用于铸钢及奥氏体不锈钢焊缝、外径小于250 mm和内外径之比小于0.7的筒体纵向焊缝、外径小于200 mm的筒体周向焊缝、各种尺寸曲面相贯焊缝。

Ship steel weld ultrasonic testing technology and quality classification

CB/T 4125-2011 船舶压载舱涂层破损面积的评估与计算方法

本标准规定了船舶压载舱涂层破损的术语和定义、检查方法及涂层破损区域面积的评估与计算方法等。 本标准适用于满足国际海事组织（IMO）制定的《所有类型船舶专用海水压载舱和散货船双舷侧处所保护涂层性能标准》（英文缩写为PSPC）要求的船舶专用海水压载舱和散货船双舷侧处所涂装时涂层的破损面积评估与计算。其它船舶舱室涂装时涂层的破损面积评估与计算亦可参照执行。

Assessment and calculating method for damaged coatings area of ballast tanks for ship

CB/T 3558-2011 船舶钢焊缝射线检测工艺和质量分级

本标准规定了用于船舶钢焊缝射线检测的一般要求、技术等级、工艺条件、检测实施和焊缝质量分级。 本标准适用于母材厚度为2 mm～200 mm钢熔化焊对接接头的射线照相检测，为船舶制造提供的其他部件和成品钢焊缝的射线检测可参照本标准执行。

Ship steel weld radiographic testing technology and quality classification

CB/T 4122-2011 船舶碳素钢管TIG焊接技术要求

本标准规定了船舶制造中的碳素钢管采用手工钨极氩气保护焊的焊接条件、焊接准备、焊接工艺、焊后检验和修补、安全防护。 本标准适用于壁厚不大于10㎜的碳素钢管TIG对接焊。

Technical requirements for tungsten inert gas arc welding of marine carbon pipes

CB/T 4126-2011 集装箱船导轨架安装工艺

本标准规定了集装箱船导轨架的安装条件、安装工具和工装、安装程序和安装方法。 本标准适用于导轨架的安装。

Installation technology of guide rails for container ship

SC/T 8117-2010 玻璃纤维增强塑料渔船木质阴模制作

本标准规定了玻璃纤维增强塑料渔船木质阴模的模具骨材制作、整体式木质阴模制作、横向分模式木质阴模制作、质量控制。 本标准适用于玻璃纤维增强塑料渔船木质阴模的制作。其他玻璃纤维增强塑料船艇亦可参考应用。

Female die making of wooden for fiberglass reinforced plastic fishing vessel

ISO 30003:2009 船舶和航海技术.船舶回收管理体系.船舶回收管理提供的船体审核和鉴定要求

This International Standard contains principles and requirements for bodies providing the audit and certification of ship recycling management systems according to management system standards and standards such as ISO 30000.

Ships and marine technology - Ship recycling management systems - Requirements for bodies providing audit and certification of ship recycling management

ISO 17338:2009 船舶与海洋技术.防火图纸.船只和高速舰船分类的消防等级标志

Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions for ships and high-speed craft

ISO 30000:2009 船舶和海洋技术.船舶重复利用管理系统.船舶重复利用设施的安全和环境噪音用管理系统规范

Ships and marine technology - Ship recycling management systems - Specifications for management systems for safe and environmentally sound ship recycling facilities

ASTM E2680-09e1 外观清晰,透明液体(外观检查程序)的标准试验方法

This method provides a pass/fail test for appearance of clear, transparent liquids. Many liquid organic products have a product specification requiring them to be clear and bright and free of visible particulate matter and of liquid phases other than the main liquid. Producers of these liquid organic products need a test method to confirm the quality of their products meets product specifications for appearance. Appearance is a manufacturing and sales specification test for ethylene glycol products and a loading specification test for methanol wall washes of marine vessels. This test method was originally designed for application to glycols and methanol wall washes of marine vessels, but may be applicable to other clear, transparent liquids. Individuals using this test method for other clear transparent liquids should assure themselves that the method is sufficient for use. There are many factors that could affect the appearance during and after sampling of a liquid product. These factors may include transferring of the liquid into a different sample container, contamination by the sample container or contamination by ambient atmosphere. Sampling and evaluation procedures need to be followed to avoid undesirable effects and assure the appearance of the sample is typical for the liquid as manufactured.1.1 This test method describes the visual assessment of the appearance of clear, transparent liquids for clarity and the presence of undesirable components (contamination) such as suspended matter, free water (or oil) and particulates when examined by transmitted light. Measurements requiring instrumentation are not included in this method. This test method was originally designed for application to glycols and methanol wall washes of marine vessels but may be applicable to other clear transparent liquids. 1.1.1 This method can be used as a field test at storage temperatures or as a laboratory test at room temperatures. 1.1.2 This method provides a rapid pass/fail test for clarity and contamination of clear, transparent liquids. It is a qualitative assessment only. 1.2 Review the current appropriate Material Safety Data Sheets (MSDS) for detailed information concerning toxicity, first aid procedures, and safety precautions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in the section on Hazards, Section 8.

Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)

ASTM E2680-09 清澈透明液体外观(视觉检查规程)的标准试验方法

This method provides a pass/fail test for appearance of clear, transparent liquids. Many liquid organic products have a product specification requiring them to be clear and bright and free of visible particulate matter and of liquid phases other than the main liquid. Producers of these liquid organic products need a test method to confirm the quality of their products meets product specifications for appearance. Appearance is a manufacturing and sales specification test for ethylene glycol products and a loading specification test for methanol wall washes of marine vessels. This test method was originally designed for application to glycols and methanol wall washes of marine vessels, but may be applicable to other clear, transparent liquids. Individuals using this test method for other clear transparent liquids should assure themselves that the method is sufficient for use. There are many factors that could affect the appearance during and after sampling of a liquid product. These factors may include transferring of the liquid into a different sample container, contamination by the sample container or contamination by ambient atmosphere. Sampling and evaluation procedures need to be followed to avoid undesirable effects and assure the appearance of the sample is typical for the liquid as manufactured.1.1 This test method describes the visual assessment of the appearance of clear, transparent liquids for clarity and the presence of undesirable components (contamination) such as suspended matter, free water (or oil) and particulates when examined by transmitted light. Measurements requiring instrumentation are not included in this method. This test method was originally designed for application to glycols and methanol wall washes of marine vessels but may be applicable to other clear transparent liquids. 1.1.1 This method can be used as a field test at storage temperatures or as a laboratory test at room temperatures. 1.1.2 This method provides a rapid pass/fail test for clarity and contamination of clear, transparent liquids. It is a qualitative assessment only. 1.2 Review the current appropriate Material Safety Data Sheets (MSDS) for detailed information concerning toxicity, first aid procedures, and safety precautions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in the section on Hazards, Section 8.

Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)

KS V ISO 9203-1:2008 造船.船体结构零件的布局.第1部分:零件定位

세 부로 나뉘어 구성된 이 시리즈는 선체구조 요소부재의 토폴로지에 대하여 규정하며, 이는

Shipbuilding-Topology of ship hull structure elements-Part 1:Location of elements

KS V ISO 9203-2:2008 造船.船体结构零件的布局.第2部分:零件的描述

세 부로 나뉘어 구성된 이 시리즈는 선체구조 요소부재의 토폴로지에 대하여 규정하며, 이는

Shipbuilding-Topology of ship hull structure elements-Part 2:Description of elements

SAE J2744-2008 船舶诊断用在建设施港口用要求

This document presents the requirements for a built-in service port to be used in vehicles intended to comply with Enhanced Evaporative Emissions Requirements. The primary function of the Service Port (Valve Assembly-Evaporative Emission Canister Purge Harness Service) is to provide non-destructive access to the evaporative emissions system toenable testing of the integrity of the system. The Service Port is used to introduce air pressure or fuel vapors into, or evacuates them out of, the system. This access may be used for the following evaluations:• Evaporative System Certifications Canister Loading and Purging• End-of-line Testing System Integrity• Service (e.g. OBD MIL on) Leak Location and Repair Verification• In-Use Compliance Testing Canister Loading and Purging• Inspection/Maintenance Testing System Integrity and Purge Check1.1 Mission/ThemeThe Service Port is a component of the Evaporative Emissions Subsystem. It shall be an integral part of the Enhanced Evaporative Emission Subsystem and therefore all requirements of that system must be met.1.2 ClassificationThe primary application of this service port will be passenger cars, and light, medium and heavy duty trucks that are required to have OBD II systems and meet Enhanced Evaporative Emissions Standards. This includes gasoline vehicles,and bi-fuel (gasoline/CNG) vehicles intended for sale in the United States and Canada or other marketplaces that adopt Enhanced Evaporative Emission Regulations similar to those in the United States and Canada.

Requirements for Built-in Services Port for On Board Diagnostics

CB/Z 120-2008 604、607钢铸件缺陷补焊

本指导性文件规定了604、607钢铸件缺陷补焊的焊接材料、焊工资格、补焊范围、补焊程序和要求、质量检验等。 本指导性技术文件适用于潜艇用604、607钢铸件调质热处理前后的缺陷补焊及质量检验。

Repair welding for defects of 604，607 steel castings

CB 1404-2008 潜艇总段建造涂装原则工艺要求

本标准规定了采用总段建造法建造的潜艇在涂装作业时对钢板表面处理、涂装作业环境、涂层厚度、涂装安全等要求。 本标准适用于采用总段建造法建造的常规潜艇的建造。

Requirement of painting principle technics for block of hull construction for submarine

CB/Z 67-2008 碳弧气刨工艺要求

本指导性技术文件规定了碳弧气刨条件、工艺及刨后清理。 本指导性技术文件适用于碳钢、铸钢、低合金钢、不锈钢、灰口铸铁、球墨铸铁、可锻铸铁、铜及铜合金、铝及铝合金（铝镁合金除外）、钛及钛合金、镍及镍合金的碳弧气刨工艺。

Technology requirements of carbon arc-air gouging