U25 舱室设备 标准查询与下载

UL 1100-1989 船上使用的酒精和煤油烹饪设备

Alcohol and kerosene cooking appliances for marine use

CB/T 3872-1999 船用厨房污物粉碎机

A waste pulverizer for the ship's kitchens

NAVY MIL-B-16305 B VALID NOTICE 1-1989 难熔绝缘砖

MIL-B-l6305B, dated 8 April 1964, has been reviewed and determined to be valid for use in acquisition.

BRICK, REFRACTORY, INSULATING

CB/T 139-1999 船用小五金通用技术条件

General specification for marine hardwares

ASTM F1245-89(2001) 船舶用压缩和自闭型,单式与双式水龙头

1.1 This specification covers single and double compression and self-closing faucets for shipboard plumbing installations. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The following precautionary caveat pertains only to the test methods portion, Section 10, of this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

ASTM F1245-89(2006) 船舶用压缩和自闭型,单式与双式水龙头

1.1 This specification covers single and double compression and self-closing faucets for shipboard plumbing installations. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The following precautionary caveat pertains only to the test methods portion, Section 10, of this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

ASTM F1244-89(2004) 船舶起居室

1.1 This specification covers the construction of marine berths for officers, crew, and passengers. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Berths, Marine

ASTM F1245-89(1994) 船舶用压缩和自闭型,单式与双式水龙头

1.1 This specification covers single and double compression and self-closing faucets for shipboard plumbing installations. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The following precautionary caveat pertains only to the test methods portion, Section 10, of this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

CB/T 3288-1987 阻火型服务窗

Fire-retardant service window

CB* 3288-1987 阻火型服务窗

本标准适用于船舶厨房间、储藏室、小卖部等的阻大型服务商。 本标准符合《1971年国际海上人命安全公约1981年修正案》的"C"级要求

Firestop service window

ISO 5780:1987 造船 舷窗 定位

Specifies the allowable positioning of windows according to ISO 1751, applicable for passenger and cargo ships. Annexes give a formula for calculation of design pressure and present simplified graphs for positioning of windows.

Shipbuilding; Side scuttles; Positioning

ISO 5779:1987 造船 普通矩形窗 定位

Specifies the allowable positioning of windows according to ISO 3903, applicable for passenger and cargo ships. Annexes give a formula for calculation of design pressure and present simplified graphs for positioning of windows.

Shipbuilding; Ordinary rectangular windows; Positioning

CB* 3305-1987 小型可调电热水器

本标准规定的小型可调电热水器用于船舶厨房间清洗各种炊具用水的加热。 此热水器具有自动进水、断水、自动加热、控温等性能。

Small adjustable electric water heater

CB* 3287-1987 玻璃钢冷藏室门

本标准规定的玻璃钢冷藏室门用于船舶上贮存鱼、肉、蔬菜等的玻璃冷藏室。

Fiberglass refrigerator door

UL 1119-1987 气流型船用卫生设施

Flow-through marine sanitation devices

JIS F 2316:1987 气候相应配件.紧密钢门

Fittings for weather-tight steel doors

ISO 8863:1987 船舶驾驶室窗 用热空气加热窗格玻璃

Is based on an outdoor air temperature of -20 鳦 and applies to all conditions except those encountered in extremely cold climates. Applies to seagoing merchant ships. The annex gives recommendations regarding the air jets.

Ship's wheelhouse windows; Heating by hot air of glass panes

ANSI/ASTM F1070:1987 船用非锁闭门规范

This specification to be used in conjunction with Specification F1073, covers the principal dimensions and the mechanical requirements for manufacturing steel, aluminum, and glass-reinforced plastic non-tight, personnel doors and dutch doors, with the exception of joiner, joiner dutch doors, and expanded metal doors, for marine use. The doors will be used in non-tight bulkheads. When fire protection requirements are applicable to the location of these doors, then the use of aluminum and glass-reinforced plastic doors shall be unacceptable. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Specification for Doors, Non-Tight, for Marine Use

ANSI/ASTM F1018a:1987 钢制应急齿轮箱规范

This specification covers the design, material, and manufacture of steel emergency gear stowage lockers. Emergency gear lockers shall be of four types (see Section ). The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Specification for Steel Emergency Gear Stowage Locker

ANSI/ASTM F1073:1987 船用防水、防气体/防空气和防风雨门配件和非密封门规范

This specification covers the principal design and type of material for manufacturing fittings for watertight/gastight/airtight, weathertight, and non-tight doors, for marine use. Note that "gastight" is commercial terminology which also means "airtight" in naval terminology. The fittings are intended for use on all doors for marine use, except joiner and expanded metal doors.

Specification for Door Fittings, for Watertight/Gastight/Airtight, Weathertight, and Non-Tight Doors, for Marine Use