U25 舱室设备 标准查询与下载

BS EN ISO 5778:2000 船舶和航海技术.防风雨的小型钢舱盖

This International Standard specifies the main dimensions, location and number of fittings, materials and quality of manufacture for small weathertight steel hatches for application on board ships in order to ensure interchangeability of the hatches. The remaining dimensions are left to the manufacturer. The hatches are suitable for loading operations and for giving access to storage compartments and dry cargo holds. The hatches are not suitable as an access to any kind of tanks and shall not be used as escape hatches. These hatches generally conform to the requirements of the International Convention on Load Lines 1966 (LLC66). The possibility for application in position 1 and position 2 has to be considered for each situation and, where necessary, the hatch covers shall be provided with additional stiffening. NOTE —Users of this International Standard should note that while observing the requirements of this standard, they should, at the same time, ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

Ships and marine technology - Small weathertight steel hatches

ISO 15371:2000 船舶与海上技术 船上厨房深油炸烹调设备用灭火系统 防火试验

1 This International Standard covers the performance during fire tests of pre-engineered fire-extinguishing system units intended for the protection of galley deep-fat cooking equipment. 2 Pre-engineered fire-extinguishing system units are required to comply also with the requirements for construction and performance as applicable to specific types, designs, sizes and arrangements, but all such additional requirements which apply are not considered to be within the scope of these requirements for fire tests.

Ships and marine technology - Fire-extinguishing systems for protection of galley deep-fat cooking equipment - Fire tests

KS V 7032-1999 船舶用焚化装置设备标准

이 규격은 선박의 운항 중에 생성되는 폐기물 및 그 밖의 선 내 쓰레기를 소각하기 위하여

Application standard of incinerator for marine use

ISO 5894:1999 船舶与海上技术 盖子用螺栓固定的人孔

This International Standard specifies requirements for watertight and oiltight manholes of the current type with bolted covers, for general shipboard use other than for pressure vessels. It specifies the dimensions for the holes in the plating and the number, size and position of the fasteners. All forms of manhole, whether of raised coaming, surface mounted or recessed cover types, shall conform to these principal particulars. The details of the manholes shall be the responsibility of the manufacturer. NOTE Users of this International Standard should note that, while observing the requirements of the standard, they should at the same time ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

Ships and marine technology - Manholes with bolted covers

JT/T 411-1999 水上可降解餐具通用技术条件

本标准规定了水上使用的可降解餐具的通用技术要求、试验方法、检验规则，以及产品标志、包装、运输、贮存和保质期的要求。 本标准适用于在水上使用的以天然植物纤维为主要原料的可降解餐具的制造。

General specification for degradable container used on the water

UL 1100-1999 船上使用的酒精和煤油烹饪设备

The requirements in this standard apply to the construction and performance Characteristics of solidified fuel cooking appliances for use on boats, including counter-top assemblies. insert surface assemblies, insert ovens, and ranges (surface cooking units and ovens included in the one appliance).

UL Standard for Safety Alcohol and Kerosene Cooking Appliances for Marine Use

JIS F 2321:1999 小型防风雨钢舱口

Small weathertight steel hatches

JIS F 2318:1999 防风雨单扇钢门

この規格は，船上で使用する鋼製風雨密一枚戸の互換性を確保するために，その主要寸法，材料及び製品の品質について規定する。ここに規定していない寸法は，製造業者の任意とする。

Weathertight single-leaf steel doors

HJB 199-1999 水面舰艇舱室.微小气候的医学要求

Medical requirements of microclimate for naval surface ship compartments

DIN 83423:1998 舱底排水井的过滤器盖

Strainer covers in accordance with this standard are provided for drain wells in cargo holes. They may either be screwed into the countersunk manhole-covers in the case that the bilge wells are closed with tight covers in the event of special cargo, or they are inserted in a cutout of the double bottom in the case that the bilge wells shall ramain open.#,,#

Strainer covers for bilge wells

ISO 6042:1998 船舶与海上技术 钢质单扇风雨密门

This International Standard specifies the main dimensions, materials, quality and conditions of manufacture for weathertight single-leaf steel doors for application on board ships, in order to ensure interchangeability of the steel doors. The remaining dimensions, welding and other details are left to the manufacturer. These doors generally conform to the requirements of the International Convention on Load Lines 1966 (LLC66). The possibility for application of the doors to position 1 and position 2 has to be considered for each situation and, where necessary, the doors shall be provided with additional stiffening (see also table 1). Annex A provides the dimensions of openings in bulkheads. NOTE — Users of this International Standard should note that while observing the requirements of this standard they should, at the same time, ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

Ships and marine technology - Weathertight single-leaf steel doors

JIS F 2413:1997 造船和船舶结构.船用侧舷窗

この規格は，船舶用丸窓の種類(系列，級別及び形式)及びこれらの丸窓について互換性と構造上必要な寸法，材料，試験，表示及び製品の呼び方について規定する。

Shipbuilding and marine structures -- Ships' side scuttles

DIN 87226:1997 排水口.露天甲板侧边排水口

The document specifies scuppers which are fitted to component parts that form the boundary of the deck, such as face plates, coamings or bulwark, at deck height. It also lays down the dimensions of the hole in the components which is required for the draining water.#,,#

Scupper - Side cuppers for free decks

DIN 87223:1997 带存水弯头的不可关闭排水口

The document contains drawings, dimensions and manufacturing details for scuppers of nominal diameter 50, which are provided for the installation in ship's deck. These scuppers are mainly applied in ship's accommodation areas.

Scupper with water trap, non shut-off type

DIN 87224:1997 带存水弯头的可关闭排水口

The document contains drawings, dimensions and manufacturing details for scuppers of nominal diameter 50, which are provided for the installation in ship's deck. These scuppers are mainly applied in ship's accommodation areas.

Scupper with water trap, shut-off type

DIN 87225:1997 露天甲板排水口

The document contains drawings, dimensions and manufacturing details for scuppers of nominal diameter 50 or more, which are provided for the installation in ship's deck. These scuppers are mainly applied in ship's accommodation areas.

Scuppers for free decks

ANSI/ASTM F1433:1997 机械制冷空调器规范

This specification covers self-contained mechanically refrigerated air conditioners for shipboard use in air circulation, air cooling, and dehumidification. These air conditioners are intended for use in compartments and areas where central system air conditioning is not provided. The values stated in SI metric units are to be regarded as standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Specification for Mechanically Refrigerated Air Conditioner

JT/T 355-1995 走廊窗

corridor window

NAVY MIL-A-22262 B (2)-1996 船体喷抛清理喷沙法媒质

This amendment forms a part of MIL-A-22262B(SH), dated 5 April 1993, and is approved for use by the Naval Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.

ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING

NF J83-243:1996 内河航运船舶.舷梯子

Inland navigation vessels. Boarding ladders.