U25 舱室设备 标准查询与下载

DIN 83105:2002 船舶用重型铰链门的铰链

Hings in accordance with the document are preferably used for heavy hinged doors on ships according to DIN 83100-1 and DIN 83100-11.

Hinges for heavy hinged doors on ships

DIN 83100-1:2002 船舶用重型铰链门.第1部分:防风雨(ISO型)、分类和交货技术条件

Heavy hinged doors on ships - Part 1: Weathertight (ISO-type), classification, technical delivery conditions

DIN 83100-3:2002 船用重型铰链门.第3部分:防风雨(ISO型)门.安装

The document is an supplement of ISO 6042. The details not included in ISO 6042 but required for a complet standardardization are laid down.

Heavy hinged doors on ships - Part 3: Weathertight (ISO-type), installation

DIN 83100-2:2002 船舶用重型铰链门.第2部分:防风雨(ISO型)的设计细则

The document is an supplement of ISO 6042. The details not included in ISO 6042 but required for a complet standardardization are laid down.

Heavy hinged doors on ships - Part 2: Weathertight (ISO-type), design details

DIN 83100-12:2002 船用重型铰链门.第12部分:不防风雨门.详细设计要求

Heavy hinged doors in accordance with the document are non-weatertight. They are located on tween decks of ships.

Heavy hinged doors on ships - Part 12: Non weathertight, design details

DIN 83100-11:2002 船舶用重型铰链门.第11部分:无防风雨的、分类和交货技术条件

Heavy hinged doors in accordance with the document are non-weatertight. They are located on tween decks of ships.

Heavy hinged doors on ships - Part 11: Non-weathertight, classification, technical delivery conditions

BS EN ISO 15748-2:2002 船和造船技术.船上和海上结构的轻便供水设备.计算方法

ISO 15748-2 applies to the planning, design and configuration of potable water supply systems on ships, stationary or floating marine structures and inland waterway crafts. It serves to determine the quantity of potable water to be carried on board, the capacity of the pressurized reservoirs and water heaters, the pumping capacity, etc.

Ships and marine technology - Potable water supply on ships and marine structures - Method of calculation

BS EN ISO 15748-1:2002 船舶和海上技术.船上和海上结构的轻便供水设备.计划和设计

ISO 15748-1 applies to the planning, design and configuration of potable water supply systems on ships, stationary or floating marine structures and inland waterway vessels. It specifies the minimum requirements for potable water supply systems to be met in order to protect the potable water and to maintain its quality. ISO 15748-1 also provides hints on components to be used and on laying of the pipelines.

Ships and marine technology. Potable water supply on ships and marine structures. Planning and design

HJB 257-2002 船舶家具及其配置要求

本標準規定了海軍艦船家具的配置、設計、制造、安裝、試驗及檢驗、使用管理等方面的要求。 本标准适用于海军正常排水量不小于100t 的水面战斗舰船、潜艇和军用辅助船，其它舰船家具可参照使用。 2 引用文件

The furniture and its configuration requirement for naval vesseles

HJB 256-2002 舰船舱室内部装饰要求

Requirements for interior decoration of ship cabins

GOST R 51936-2002 压力室分类

Pressure chambers. Classification

KS V ISO 8099:2001 小型船舶.卫生间废弃物滞留系统

이 규격은 분뇨의 연속 처리를 위한 임시 분뇨 저장 장치의 설계, 건조 및 설치에 대한 요

Small craft－Toilet waste retention systems

ASTM F782-01(2012) 船用门和家具的标准规范

1.1 This specification covers the construction of furniture doors for use where invoked by other marine furniture specifications. 1.2 This specification applies to all furniture doors for marine furniture, in items requiring hinged doors. 1.3 Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are for information only.

Standard Specification for Doors, Furniture, Marine

ASTM F782-01(2007) 船用家具门的标准规范

1.1 This specification covers the construction of furniture doors for use where invoked by other marine furniture specifications. 1.2 This specification applies to all furniture doors for marine furniture, in items requiring hinged doors. 1.3 Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are for information only.

Standard Specification for Doors, Furniture, Marine

ASTM F782-01 船用家具门的标准规范

1.1 This specification covers the construction of furniture doors for use where invoked by other marine furniture specifications. 1.2 This specification applies to all furniture doors for marine furniture, in items requiring hinged doors. 1.3 Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are for information only.

Standard Specification for Doors, Furniture, Marine

ANSI/ASTM F782:2001 船用家具门规范

This specification covers the construction of furniture doors for use where invoked by other marine furniture specifications. This specification applies to all furniture doors for marine furniture, in items requiring hinged doors. Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are for information only.

Specification for Doors, Furniture, Marine

ANSI/ASTM F821:2001 国内航线用船舶内部钢制门和门框的规范

This specification covers the construction of standard and custom-built interior steel doors and frames for ships including U.S. Coast Guard certificated vessels with domestic routes. Doors and frames are to be hollow metal construction with the door insulated for sound or fire. The doors are intended for use in staterooms, lavatories, passageways, and other areas protected from weather. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.

Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

ANSI/ASTM F1197:2001 防水拉门控制系统标准规范

This specification covers the design, manufacture, and testing of controls and operating mechanisms for use with sliding watertight doors meeting the requirements of Specification F 1196. The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only.

Specification for Sliding Watertight Door Control Systems

ANSI/ASTM F1196:2001 防水拉门组件标准规范

This specification covers the design, manufacture, and testing of sliding watertight door assemblies intended to ensure the watertight integrity of personnel access openings in watertight bulkheads. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Specification for Sliding Watertight Door Assemblies

ISO 8099:2000 小艇 厕所污物集存系统

This International Standard specifies requirements for the design, construction, and installation of systems for temporary retention of sewage for subsequent disposal. It applies to small craft of hull length up to 24 m.

Small craft - Toilet waste retention systems