U40 船用主辅机综合 标准查询与下载

ANSI/AGMA 6133-2008 船舶推动传动装置用材料

Identifies commonly used alloy steels, heat treatment and inspection requirements for through hardened, case hardened and surface hardened gearing for main propulsion marine service over 1500 horsepower. Mechanical, metallurgical and nondestructive test requirements are provided for various heat treat processes and metallurgical quality grades of gearing. Metric edition of AGMA 6033-CXX.

Materials for Marine Propulsion Gearing

SAE J1223-2006 船用化油器和燃油喷射节气门体

This SAE Recommended Practice covers all carburetors and throttle bodies used on permanently installed gasoline marine engines. To recommend design practices and test procedures for carburetors and throttle bodies used in a marine environment.

Marine Carburetors and Fuel Injection Throttle Bodies

JIS F 7601:2006 造船.船舶用机械零备件

この規格は，船舶の機関部に装備される機器に対する予備品の供給数量について規定する。なお，電気関係の予備品は含めていない。

Shipbuilding -- Spare parts for ships machinery

JIS F 0503:2005 造船.船舶机械用螺旋弹簧

この規格は，船舶機関部に使用する圧縮ばね又は引張ばねのうち，円形断面の材料を使用し，熱間又は冷間で成形される円筒形コイルばね(以下，ばねという。)について規定する。

Shipbuilding -- Coiled springs for marine machinery

KS V ISO 9775:2005 小型船舶.功率15kW~40kW舷外挂机的遥控操作系统

이 규격은 단일 선외기 출력이 15 kW 내지 40 kW인 소형 선박용 원격 푸시-풀 케이

Small craft－Remote steering systems forsingle outboard motors of 15 kW to 40 kW power

KS V ISO 6050:2005 造船.球鼻艏和侧推器符号

이 규격은 구상 선수와 현측 스러스터의 위치를 나타내기 위하여 선체에 사용되는 기호 (sy

Bulbous bow and side thruster symbols

KS V ISO 8845:2004 舱内安装的发动机的船只.螺旋桨轴端和轴壳

이 규격은 선내에 엔진이 있는 레저용 및 상업용 소형 선박에 설치할 목적으로 설계된 축지름

Small craft with inboard engine-Propeller shaft ends and bosses with 1:16 taper

DIN EN ISO 3715-1:2004 船舶和海上技术.船舶用推进装置.推进器的几何学词汇

This part of ISO 3715 gives terms and definitions for screw propellers used in the propulsion plants of ships and other vessels (such as mobile offshore drilling units) that are self-propelled or propulsion-assisted. The definitions are valid only for the hydrodynamically effective part of the propeller. No definitions are given for the mechanical construction of the hub. Vocabulary for hydraulically operated controllable-pitch propeller plants is given in ISO 3715-2.

Ships and marine technology - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers (ISO 3715-1:2002); German version EN ISO 3715-1:2004

DIN EN ISO 3715-2:2003 船舶和海上技术.船舶推进器.第2部分:变距推进器术语

The document gives terms and definitions applicable exclusively to continuously variable and hydraulic operated controllable-pitch propeller units. It does not cover controllable-pitch propeller units for which only a few specified pitch settings apply.

Ships and marine technology - Propulsion plants for ships - Part 2: Vocabulary for controllable-pitch propeller plants (ISO 3715-2:2001); German version EN ISO 3715-2:2002

ISO 22090-1:2002 船舶和海上技术.传递航向装置(THDs).第1部分:航向陀罗仪

This part of ISO 22090 specifies the construction, performance and testing of gyro-compasses as transmitting heading devices required by chapter V, SOLAS 1974 (as amended). A Transmitting heading device (THD) is an electronic device that provides information about the ship's true heading. In addition to the general requirements contained in IMO Resolution A.694 (17) to which IEC 60945 is associated and the relevant standard for the sensing part used, the THD equipment should comply with the following minimum requirements. Where the IMO performance standards that apply to the sensing part do not specify a geographical operating area that the THD should operate; a) at maximum rate of turn 20°/s; b) from 70°latitude south to 70°latitude north as minimum. The THDs complying with the requirements contained in this part of ISO 22090 can be used for heading information as contained in chapter V of the SOLAS Convention. However, ships within a speed range of 30 knots to 70 knots should comply with the requirements of IMO Resolution A.821 (19) In addition, such THDs should meet the dynamic requirements contained in the HSC Code, chapter 13 for the carriage of a suitable device providing heading information. NOTE 1 Several technologies can be used to detect and transmit heading information. It is illogical to standardize the detection of the heading separately from the transmission of the heading. Therefore, separate parts of this part of ISO 22090 refer to different technologies. The requirements of this part of ISO 22090 only apply to gyroscopic technology. Other technologies are covered in other parts of ISO 22090. NOTE 2 All requirements that are extracted from the recommendations of IMO Resolution MSC. 116 (73) on performance standards for transmitting heading devices are printed in italics.

Ships and marine technology - Transmitting heading devices (THDs) - Part 1: Gyro-compasses

JIS F 0401:1999 造船.内燃推进发动机输出的定义和术语

この規格は，船に装備される内燃主機関の出力の呼び方及びその定義について規定する。

Shipbuilding -- Terminology and definition of output of internal combustion propulsion engines

CB/T 3775-1996 船舶燃油系统自动控制装置试验方法

本标准规定了船舶的主、辅柴油机的燃油自动控制装置在船上的试验方法。 本标准主要适用于海洋船舶，其他船舶亦可参照使用。

Test method for automatic control device of marine fuel oil system

ISO 8845:1994 舷内机小艇 带1:16锥度的螺旋桨轴端和轴毂

Specifies the dimensions for interchangeability of propeller bosses and propeller shaft ends in the shaft diameter range of 20 mm to 160 mm with a taper of 1:16, intended for installation in inboard-engined recreational and commercial small craft.

Small craft with inboard engine - Propeller shaft ends and bosses with 1:16 taper

ISO 8665:1994 小艇 船用主机和系统 功率测定及报告书

Specifies the test requirements in addition to those given in ISO 3046-1 for determining the power, at a single point or as a power curve, of marine propulsion engines or systems for recreational craft and other small craft using similar propulsion equipment of up to 24 m hull length. Also provides the means for documenting and checking the declared (rated) power published by the manufacturer.

Small craft - Marine propulsion engines and systems - Power measurements and declarations

JIS F 1024:1994 小船.手动液压驾驶系统

Small craft -- Hand powered hydraulic steering systems

DIN EN 29775:1993 游艇.功率为15KW至40KW单个舷外电动机的遥控系统

The document specifies requirements and test methods for remote push-pull cable steering systems and their major component items, used for small craft with single outboard motors of 15 kW to 40 kW power.#,,#

Small craft; remote steering systems for single outboard motors of 15 kW to 40 kW (ISO 9975:1990); German version EN 29975:1993

JIS F 0024:1993 造船.机械设备.轴系、推进器和喷水式动力系统.词汇

この規格は，軸系，プロペラ及びウォータージェット推進装置関係の用語について規定する。

Shipbuilding -- Machinery -- Shafting, propeller and water jet propulsion system -- Vocabulary

JIS F 7002:1992 船舶.发动机用转速表

この規格は，船の機関に使用する回転積算計及び回転速度計（以下，回転計という。)の種類及びその装備について規定する。

Ships -- Tachometer for engine

NF X50-820:1992 游艇服务业.服务规范和服务规定.游艇和器材的分布.船舶维护和修理.电动机的销售和修理

Boating services. Specifications for service and provision of service. Distribution of yachts and materiel. Ship maintenance and repairing. Motor sale and repairing.

CB/T 3494-1992 船用主机燃油机油日用系统 管路冲洗校术条件

本标准规定了船用主机燃油机油日用系统管路冲洗的基本技术要求，冲洗和检验方法。 本标准适用于船用柴油机动力装置中，以循环方式润滑的机油日用管路和燃油日用管路，其他燃油机油管路亦可参照使用。

Conditions for pipeline flushing of fuel and engine oil daily system of marine main engine