U47 舱室辅机 标准查询与下载

CB/T 4195-2011 船舶控制设备用无油空气压缩机

本标准规定了船舶自动控制仪表用无油空气压缩机的技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于额定排气压力为0.7 MPa和1 MPa，容积流量最大为360 m/h的空压机的设计、制造、试验和验收等。

Marine oil-free air compressor for control use-Technical specification

CB/T 4193-2011 潜水装具用高压活塞空气压缩机

本标准规定了潜水装具用高压活塞空气压缩机的技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于潜水作业人员呼吸用的额定排气压力为15MPa以上（含15MPa）的空压机的设计、制造、试验和验收等。

Air compressor for high pressure reciprocating air diving apparatus

CB/T 4182-2011 船用油水界面探测器要求

本标准规定了船用油水界面探测器的要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于探测器的设计、制造和验收。

Require of Marine Oil-water Interface Detector

CB/T 3523-2011 船用立式海水泵

本标准规定了在温度为0℃～50℃、湿度为95%的机舱内以电动机驱动的船用立式海水泵（以下简称泵）的要求、试验方法、检验规则和标志、包装、运输和贮存等。 本标准适用于船舶冷却系统、压载系统、消防系统、日用水系统和海水淡化装置等使用泵的设计、生产与试验验收。

Marine vertical sea water pump

ASTM F1511-11 船用泵机械密封件的标准规范

1.1 This specification covers mechanical end-face seals for centrifugal and positive displacement pumps for shipboard use. 1.2 The following types of seals are not included in this specification: lip seals, oil seals, circumferential seals, or labyrinth seals. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. A companion hard metric standard is in the process of preparation. 1.4 Special requirements for U.S. Navy Shipboard Pump Applications are included in Supplement S1.

Standard Specification for Mechanical Seals for Shipboard Pump Applications

ANSI/ABYC H-22-2011 电动舱底水泵系统

This standard is a guide for the design, construction, installation, operation, and control of electric bilge pump systems.

Electric Bilge Pump Systems

ASTM F998-10 船用离心泵的标准规范

1.1 This specification covers the requirements applicable to the design and construction of centrifugal pumps for shipboard application. The three classes of service covered by this specification are as follows: 1.1.1 Class 1—Freshwater, 1.1.2 Class 2—Seawater, and 1.1.3 Class 3—Hydrocarbon pumps (less than 1500 SSU). 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.

Standard Specification for Centrifugal Pump, Shipboard Use

GJB 6850.147-2009 水面舰船系泊和航行试验规程 第147部分：冷藏系统试验

Surface ship mooring and sailing test procedures part 147: Refrigeration system test

GJB 6850.166-2009 水面舰船系泊和航行试验规程 第166部分：空气压缩机和压缩空气系统试验

Surface ship mooring and sea test procedures part 166: Air compressor and compressed air system test

GJB 6850.145-2009 水面舰船系泊和航行试验规程 第145部分：通风系统试验

Surface ship mooring and sailing test procedures part 145: Ventilation system test

GJB 6850.146-2009 水面舰船系泊和航行试验规程 第146部分：空气调节系统试验

Surface ship mooring and sailing test procedures part 146: air conditioning system test

ANSI/ASTM F2798:2009 船用无泄漏润滑油泵通过马达泵油的规范

Specification For Sealless Lube Oil Pump With Oil Through Motor For Marine Applications

ISO 7547:2002/Cor 1:2008 船舶和海洋技术.起居舱室的空调和通风.设计条件和计算基础.技术勘误1

Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations; Technical Corrigendum 1

Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations; Technical Corrigendum 1

SANS 15083:2008 小艇.舱底泵吸系统

Specifies requirements for pumping or alternative means designed to remove normal accumulations of bilge water for small craft with a hull length of up to 24 m. Does not set requirements for bilge pumps or bilge-pumping systems designed for damage contro

Small craft - Bilge-pumping systems

CB/T 3979-2008 碟式分离机模块

本标准规定了了船用碟式分离机模块（以下简称模块）的分类和标记、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于船舶燃油、滑油模块的设计、制造和检验。

Disc separator module

ANSI/ASTM F1510:2007 商用船只旋转式正排量泵的规范

This specification defines the requirements applicable to design and construction of rotary positive displacement pumps for shipboard use. The classes of service are shown in Section 4. This specification will not include pumps for hydraulic service or cargo unloading applications.

Specification for Rotary Positive Displacement Pumps, Commercial Ships Use

ASTM F1510-07 船用旋转容积式泵用标准规范

1.1 This specification defines the requirements applicable to design and construction of rotary positive displacement pumps for shipboard use. The classes of service are shown in Section 4. 1.2 This specification will not include pumps for hydraulic service or cargo unloading applications.

Standard Specification for Rotary Positive Displacement Pumps, Ships Use

GJB 5904-2006 舰船用离心泵机械密封规范

本规范规定了舰船用离心泵机械密封的要求、质量保证规定、交货准备等。 本规范适用于舰船用离心泵、旋涡泵及其它类似泵的机械密封。

Specification of mechanical seal for centrifugal pump on ships

KS V 7012-2006 船舶发动机用转速计

이 규격은 선박의 기관에 사용하는 회전 적산계 및 회전 속도계(이하 회전계라 한다.)의

Ships-Tachometer for engine

UL 1105 BULLETINS-2006 船用过滤器和分离器

Marine use filters, strainers and separators

Marine use filters, strainers and separators