V11 航空与航天用金属铸锻材料 标准查询与下载

EN 6090:2016 航空航天系列-垫圈、止动

This European Standard specifies the dimensions, tolerances, required characteristics and mass of a retaining washer for use in fuselage interior equipment and structural applications.

Aerospace series - Washer, retaining

EN 16602-70-71:2016 航天产品保险-材料,工艺及其数据选择

This Standard specifies the requirements applicable to materials, processes and their data selection to satisfy the mission performance requirements. This Standard covers the following: selection criteria and rules; utilization criteria and rules. The provisions of this Standard apply to all actors involved at all levels in the production of space systems. These can include manned and unmanned spacecraft, launchers, satellites, payloads, experiments, electrical ground support equipment, mechanical ground support equipment, and their corresponding organizations. This standard may be tailored for the specific characteristics and constraints of a space project in conformance with ECSS-S-ST-00.

Space product assurance - Materials@ processes and their data selection

DIN EN 4700-002:2016 航空航天系列.钢和耐热合金.锻制产品.技术规范.第002部分:棒材和型材;德文和英文版本EN 4700-002-2016

Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section; German and English version EN 4700-002:2016

EN 6092:2016 航空航天系列-插座、浮动式、双接线片

This European Standard specifies the dimensions, tolerances, required characteristics and mass of a receptacle for use in fuselage interior equipment and structural applications. This standard shall be used in conjunction with studs per EN 6088 or EN 6105.

Aerospace series - Receptacle, floating, double lug

EN 6094:2016 航空航天系列-垫圈,弹簧,钻孔装埋

This European Standard specifies the dimensions, tolerances, required characteristics and mass of a countersunk spring washer for use in fuselage interior equipment and structural applications.

Aerospace series - Washer@ spring@ countersunk

EN 16602-20-08:2016 航天产品保险-航天器硬件的存储,搬运和运输

The standard specifies requirements to ensure safe handling, storage, transportation of space segment hardware, including associated items to avoid degradation from integration up to launch. The standard is applicable to: Space systems, Space segments, Assembled Spacecraft, Space segment elements, Spacecraft Modules, space segment subsystems, space segment equipment, partly manufactured space segment equipment. Intended programs are all space programs and target users all space hardware suppliers and customers. The standard does not cover obsolescence management issues. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00. NOTE This standard is applicable to GSE, when mentioned in the different clauses of this standard.

Space product assurance - Storage@ handling and transportation of spacecraft hardware

EN 16603-32-08:2016 空间工程 材料

ECSS-E-ST-32-08 specifies the mechanical engineering requirements for materials. This Standard also encompasses the mechanical effects of the natural and induced environments to which materials used for space applications can be subjected. This standard specifies requirements for the establishment of the mechanical and physical properties of the materials to be used for space applications, and the verification of these requirements. Verification includes destructive and non-destructive test methods. Quality assurance requirements for materials (e.g. procurement and control) are covered by ECSS-Q-ST-70. This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.

Space engineering - Materials

EN 16602-20-07:2016 航天产品保险-空间试验中心的质量和安全保证

This standard specifies quality assurance and safety assurance requirements for space test centres, applicable to the test process, test personnel (both, of the customer and the space test centre), test facilities, test environment and any operations related to the test specimen under responsibility of the space test centre as requested by the customer. This standard may be tailored for the specific characteristic and constraints of a space project in conformance with ECSS-S-ST-00.

Space product assurance - Quality and safety assurance for space test centres

EN 2997-014:2016 航空航天系列.连接器.耐火或不耐火的螺纹环连接的环形电子连接器航空航天系列连接器.耐火或不耐火的螺纹环连接的环形电子连接器

This standard specifies the characteristics of square flange mounted receptacles with integrated accessory in the family of circular electrical connectors coupled by threaded ring. It applies to class defined in Table 3. For contacts, filler plugs associated with this receptacle, see EN 2997-002. For plugs, see EN 2997-008 and EN 2997-016 and for protective covers, see EN 2997-009.

Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 014: Square flange receptacle with integrated ac

EN 4474:2016 航空航天系列-热镀铝涂层-涂覆方法

This European Standard defines the coating methods and characteristics of aluminium pigmented coatings to EN 4473 which may be applied to fasteners in titanium, titanium alloys, heat resisting nickel base or cobalt base alloys and corrosion resisting steels.

Aerospace series - Aluminium pigmented coatings - Coating methods

DIN EN 4377:2016 航空航天系列.耐热合金NiCr19Fe19Nb5Mo3(2.4668).非热处理.锻坯.a/D≤300 mm.德文和英文版本EN 4377-2015

Aerospace series - Heat resisting alloy NiCr19Fe19Nb5Mo3 (2.4668) - Non heat treated - Forging stock - a or D <= 300 mm; German and English version EN 4377:2015

BS EN 4700-002:2016 航空航天系列.钢和耐热合金.锻制产品.技术规范.棒材和型材

Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Bar and section

EN 9104-002:2016 航空航天系列-质量管理体系-航空航天质量管理体系认证/注册程序的要求

The requirements established in this document are applicable to the IAQG and associated sectors for managing oversight to established requirements contained in EN 9104-series standards (i.e., EN 9104-001, EN 9104-002, EN 9104-003). The requirements are applicable to IAQG working groups for oversight. NOTE All required forms are depicted in Appendix A. These form exhibits are provided for reference only; the current versions of these forms are available on the IAQG website. The purpose of this standard is to document the ICOP oversight process and define a robust shared oversight process which provides objective evidence of conformance to established aerospace industry EN 9100-series standards (i.e., EN 9100, EN 9110, EN 9120) requirements and associated accreditation/certification.

Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs

EN 3909:2016 航空航天系列-电子元件和附属配件用试验流体和试验方法

This standard specifies the list of test fluids to be used to demonstrate that components and sub-assemblies will not be adversely affected by contamination by fluids types that they may typically be exposed to. The fluids listed are representative of those commonly used and encountered in airborne and ground operations, and align with the requirements of fluids susceptibility of ISO 7137. This shall not be considered an exhaustive list and additional test fluids may be instructed in the product standard, against which compliance needs to be demonstrated. This standard, when used in conjunction with the test requirements defined in Clause 6 or the product standard shall be considered the starting point to test a component to determine its minimum performance capability when exposed to the fluids listed. Test results obtained from a number of sources over a considerable period of time have shown that, in many cases, widely varying results can be obtained when using fluids that are used in service. The practice of specifying fluids based on performance criteria rather than their constituents can mean variations in test results between batches of the fluid obtained from different manufacturers, or even from the same manufacturer. For this reason the EN 3909 Standard recommends the use of "standard test fluids" which are specified by their constituents and contain the chemicals that may be found in commonly used fluids.

Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies

EN 9239:2016 航空航天系列-项目管理-风险管理指南

This document enables to answer specific needs in the field of Aeronautics although it does not present any sectorial characteristic and may therefore apply to the needs of other areas. However, the specificity of some areas can lead to the use of existing sectorial standards such as EN ISO 17666 Space systems - Risk management (ISO 17666:2003). This document: - proposes the main steps for setting up Risk Management framework within programme Management. This guideline may serve as a basis for writing a Risk Management specification; - describes a process for controlling programme risks within the defined boundaries that are considered as tolerable. This standard process can be used as a methodological guide for writing the programme Risk Management Plan; - recognises the need for knowledge management related to Risk Management, in order to capitalize and to share lessons learnt with other programmes, as well as the maturity assessment of the Risk Management; - identifies useful documents for Risk Management; - proposes an example of a typical checklist of risks related to a programme; in addition; - addresses opportunities. An opportunity is an uncertain event with positive consequences on the programme.

Aerospace series - Programme Management - Guide for the risk management

EN 4644-003:2016 航空航天系列-连续工作温度175℃(或125℃)下矩形模块和矩形插件的电连接器和光连接器-第003部分:矩形插入件-产品标准

This European Standard specifies the characteristics of rectangular inserts used in the family of electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous, coupled by a locking mechanism or rack and panel.

Aerospace series - Connector@ electrical and optical@ rectangular@ modular@ rectangular inserts@ operating temperature 175 ��(or 125 �� continuous - Part 003: Rectangular inserts - Product standard

EN 4644-133:2016 航空航天系列-连续工作温度175℃(或125℃)下矩形模块和矩形插件的电连接器和光连接器-第133部分:机架和面板应用的尺寸3插座C级和D级-产品标准

This European Standard specifies the size 3 receptacle for rack and panel application used in the family of modular rectangular electrical and optical connector with rectangular inserts. The plug corresponding to this receptacle is defined in EN 4644-131.

Aerospace series - Connector@ electrical and optical@ rectangular@ modular@ rectangular inserts@ operating temperature 175 ��(or 125 �� continuous - Part 133: Size 3 receptacle for rack and panel application@ class C and D - Product Standard

EN 4697:2016 航空航天系列.乘客座椅配件通用和安装要求

This European Standard specifies the installation and removal requirements and the space envelopes for passenger seat fittings on aircraft. The purpose is to reduce the installation time and the tooling required for seat installation by standardizing the seat attachment fasteners (fittings).

Aerospace series - General and installation requirements for passenger seat fittings

EN 4644-141:2016 航空航天系列-连续工作温度175℃(或125℃)下矩形模块和矩形插件的电连接器和光连接器-第141部分:机架和面板应用4级插头C级和D级-产品标准

This European Standard specifies the size 4 plug for rack and panel applications used in the family of modular rectangular electrical and optical connector with rectangular inserts. The receptacle corresponding to this plug is defined in EN 4644-142. This size 4 plug connector can also be mated with two size 2 receptacle connectors.

Aerospace series - Connector@ electrical and optical@ rectangular@ modular@ rectangular inserts@ operating temperature 175 ��(or 125 �� continuous - Part 141: Size 4 plug for rack and panel applications@ class C and D - Product standard

EN 4700-002:2016 航空航天系列.钢和耐热合金.锻制产品.技术规范.棒材和型材

This European Standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy bar and section. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section