V16 热加工工艺 标准查询与下载

SAE AMS4148D-1999 UNS A97175 固溶及沉淀热处理的(7175-T66)铝合金型锻

This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of August 2006. It is recommended, therefore, that this specification not be specified for new designs.

Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat Treated UNS A97175

SAE AMS-C-26074-1998 化学镀镍涂层要求

This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of October, 2005. It is recommended, therefore that this specifications not be specified for new designs. "NONCURRENT" refers to those specifications which have previously been widely used and which may be required for production or processing of existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs.

Coatings, Electroless Nickel Requirements for

SAE AMS-C-81562-1998 镉,锡镉和锌涂层(机械沉积)

This specification covers the requirements for three types and three classes of mechanically deposited cadmium, tin-cadmium or zinc coatings on metallic surfaces by impacting (peen plating).

Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited)

QJ 3071-1998 等离子弧焊技术条件

Plasma arc welding technical conditions

HB 7608-1998 高温合金、不锈钢真空电子束焊接质量检验

本标准规定了高温合金、不锈钢真空电子束焊接质量的技术要求和检验规则。 　　本标准适用于铁基、镍基、钴基高温合金及不锈钢锻、铸、轧可焊材料的同种和异种焊件真空电子束焊接的质量检验。

High temperature alloy, stainless vacuum electron beam welding quality inspection

HB/Z 317-1998 热固性塑料制品注塑工艺

本标准规定了热固性塑料制品注塑成型的材料、设备与工装、工艺过程、后处理、二次加工与涂（浸）漆、过程控制、安全与卫生等。 　　本标准适用于热固性酚醛类、氨基类塑料制品的注塑成型。

Injection molding process of thermosetting plastic products

NAVY QPL-19565-26-1998 热绝缘防火和水的水蒸气屏障外壳混合物

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

COATING COMPOUNDS, THERMAL INSULATION, FIRE- AND WATER-RESISTANT, VAPOR-BARRIER

QJ 2045A-1998 弹性合金的热处理

Heat Treatment of Elastic Alloys

QJ 1703A-1998 铸造铝合金的热处理

Heat Treatment of Cast Aluminum Alloy

AECMA PREN 3785-1998 航空航天系列37度球形抗热喷口盖组英尺系列

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make but find it generally acceptable it would be helpful if you would noti@ us accordingly. Suggestions entailing revision of the text should indicate the preferred wording.

Aerospace Series Pipe Couplings, 37 Degree, Spherical, in Heat Resisting Steel Cap Assemblies Inch Series

HB/Z 5020-1997 铸造铝镍钴永磁合金热处理

本技术文件适用于HB5018-77铸造铝镍、铝镍钴、铝镍钴钛系永磁合金的热处理，是工厂编制工艺文件的依据

Heat Treatment of Cast AlNiCo Permanent Magnetic Alloy

HB/Z 80-1997 航空用不锈钢和耐热钢热处理说明书

本说明书规定了航空产品常用的不锈钢、耐热钢热处理工艺规范、工艺要求、热处理设备、质量控制及检验有关要求。是指导部内工厂不锈钢、耐热钢制件热处理的主要技术文件。

Instructions for heat treatment of stainless steel and heat-resistant steel for aviation

HB 5018-1997 铸造铝镍钴永磁合金

本标准适用于航空工厂铸造并经热处理的铝镍、铝镍钴、铝镍钴钛系永磁合金。

Cast AlNiCo permanent magnet alloy

HB/Z 309-1997 高温合金及不锈钢真空钎焊

本标准规定了高温合金及不锈钢真空钎焊的文件、设备、材料、钎焊操作过程、检验及补焊要求。 　　本标准适用于航空发动机及其它航空产品中的高温合金及不锈钢制件的真空钎焊。

High temperature alloy and stainless vacuum braze welding

QJ 2906-1997 镁合金的热处理

Heat Treatment of Magnesium Alloys

QJ 2868-1997 二氧化碳气体保护半自动焊工艺规范

Carbon dioxide gas shielded semi-automatic welding process specification

QJ 1666-1995 钛及钛合金熔焊技术条件

Titanium and titanium alloy fusion welding technical conditions

AECMA PREN 2663-1997 航空航天系列.Ni-PH3601(NiCr22Mo9Nb)溶液处理片 ,带坯0,2mm小于或等于a＜10mm

This standard specifies the method of leakage by integrity testing of tube used under pressure, intended for aerospace construction.

Aerospace Series Heat Resisting Alloy Ni-PH3601 (NiCr22Mo9Nb) Solution Treated Sheet, Strip and Plate 0,2 mm Less Than or Equal to a Less Than or Equal to 10 mm Edition P 2

QJ 2905-1997 加工铜及铜合金的热处理

Heat treatment for machining copper and copper alloys

NAVY DOD-I-24688 (1)-1996 开路聚酰亚胺泡沫吸收声热型绝缘板

This amendment forms a part of DOD-I-24688, dated 18 August 1987, andis approved for use by all Departments and Agencies of the Department of Defense.

INSULATION PANEL, THERMAL AND ACOUSTIC ABSORPTIVE, OPEN-CELL POLYIMIDE FOAM