V27 电气装置用结构件 标准查询与下载

SAE AS81714/12A-2010 系列I,双列线连接部分接头排接线盒,接线系统

TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, DOUBLE, SERIES I

DIN EN 4199-004:2010 航空航天系列.航空器用连接带.第004部分:-65℃至150℃镀锡的圆形连接带或-65℃至260℃下镀镍连接带用圆形编织铜导体.产品标准.德文和英文版本EN 4199-004-2009

Aerospace series - Bonding straps for aircraft - Part 004: Round bonding straps, copper, tin plated -65 °C up to 150 °C and nickel plated -65 °C up to 260 °C - Product standard; German and English version EN 4199-004:2009

DIN EN 6049-003:2010 航空航天系列.电缆装置.间位芳香族聚酰胺纤维保护套管.第003部分:编制管状形可膨胀的产品标准.德文及英文版本EN 6049-003-2009

This standard defines the characteristics of tubular braided expandable mechanical protection sleeves for electrical cable and cable bundles made from Meta-aramid fibres and provided with a water repelled protection.

Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard; German and English version EN 6049-003:2009

SAE AS23190/4-2008 1类V型电缆导线扎匝和支撑用金属衬垫夹具安装五金件

Mounting Hardware, Cushion Clamp, Metal for Cable Harness Tying and Support, Type V, Class 1

SAE AS23190-A3-2008 电缆线束捆绑和支撑用的塑料和金属带材,夹子和安装硬件

Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support

Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support

HB 7818-2006 中心固定尼龙支架

本标准规定了中心固定尼龙支架（以下简称支架）的结构、尺寸和要求。 本标准适用于与尼龙系带配合以固定导线束。使用温度为-40 ℃～85 ℃，支架用螺钉固定。

Central fixed nylon bracket

HB 7820-2006 平行固定T型尼龙支架

本标准规定了平行固定T型尼龙支架（以下简称支架）的结构、尺寸和要求。 本标准适用于与尼龙系带配合以固定导线束。使用温度为-40 ℃～85 ℃，支架用铆接固定。

Parallel fixed T nylon bracket

HB 7822-2006 双面固定尼龙支架

本标准规定了双面固定尼龙支架（以下简称支架）的结构、尺寸和要求。 本标准适用于与尼龙系带配合以固定导线束。使用温度为-40 ℃～85 ℃，支架用铆固定。

Double sides fixed nylon bracket

HB 7823-2006 侧面固定尼龙支架

本标准规定了侧面固定尼龙支架（以下简称支架）的结构、尺寸和要求。 本标准适用于与尼龙系带配合以固定导线束。使用温度为-40 ℃～85 ℃，支架用螺钉固定。

Side face fixed nylon bracket

HB 7819-2006 垂直固定T型尼龙支架

本标准规定了垂直固定T型尼龙支架（以下简称支架）的结构、尺寸和要求。 本标准适用于与尼龙系带配合以固定导线束。使用温度为-40 ℃～85 ℃，支架用铆接固定。

Vertical fixed T nylon bracket

HB 7821-2006 单面固定尼龙支架

本标准规定了单面固定尼龙支架（以下简称支架）的结构、尺寸和要求。 本标准适用于与尼龙系带配合以固定导线束。使用温度为-40 ℃～85 ℃，支架用铆接固定。

Single side fixed nylon bracket

NF L54-174-010*NF EN 3218-010:2006 航空航天系列.带金属套和螺丝锁紧矩形连接器.第010部分:EN 3218-006到EN 3218-008连接器保护套管.标准产品

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 010 : protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard.

DIN EN 2591-100:2006 航空航天系列.电和光学连接元件.试验方法.第100部分:总则

This standard specifies the general requirements for the methods of testing elements of electrical, optical and data transmission system connections used in aerospace applications.#,,#

Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General; German and English version EN 2591-100:2005

AECMA PREN 3155-001-2006 航空航天系列.用在连接部件的电接点.第001部分:技术规范

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make hut find it generally acceptable it would be helpful if you would notify US accordingly. Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Aerospace series Electrical contacts used in elements of connection Part 001: Technical specification Edition P 4

AECMA PREN 3155-009-2006 航空航天系列.用在连接部件的电接点.第009部分:A型卷边S级塞孔电接点　产品标准

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Electrical Contacts Used in Elements of Connection Part 009: Contacts, Electrical, Female, Type A, Crimp, Class S Product Standard Edition P 3

AECMA PREN 3155-015-2005 航空航天系列.用在连接部件的电接点.第015部分:A型卷边S级塞孔电接点 产品标准

The text of this standard, which exists in three equivalent versions (English, French, German), has been drawn up under the responsability of A ECMA (Association Européenne des Constructeurs de Matériel Aérospatial) and has .receive.d the agreement of Official Services concerned.

Aerospace series Electrical contacts used in elements of connection Part 015: Contacts, electrical, female, type A, crimp, class S Product standard Edition P 4

BS EN 12312-17:2004 航空航天系列.飞行器地面支持设备.特殊要求.空调设备

This document specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of specific air conditioning equipment for aircraft ground support, when carried out in accordance with the specifications given by the manufacturer or his authorised repre-sentative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This document is not dealing with the hazards of air conditioning machinery itself, but with the equipment for the specific application of such machinery as aircraft ground support equipment. This document applies to all types of moveable air conditioning equipment with evaporators for cooling, heating and ventilating the interior of civil aircraft from outside (ground air conditioning). Examples see Annex A. It also applies to air conditioning units and accessories, e.g. hoses, couplers, mounted on moveable parts of passenger boarding bridges and/or moveable parts of fixed centralized aircraft air conditioning equipment, whether passenger boarding bridge mounted or ramp integrated. This document does not establish requirements for noise and vibration Noise and vibration are dealt with respectively in prEN 1915-4 and prEN 1915-3.. This document is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron. This Part of EN 12312 is not applicable to air conditioning equipment, which is manufactured before the date of publication of this standard by CEN.

Aerospace series - Aircraft ground support equipment - Specific requirements - Air conditioning equipment

SAE AS24122-2004 FSC6150 单相交流115 V外部电源线束 [代替: NAVY MS24122,版本C,中国民航 注意 3,NAVY MS24122,版本C,有效,注意 2,NAVY MS24122 版本 C,有效注意 1,NAVY MS24122 版本 C,NAVY MS24122 版本 B,NAVY MS24122 版本 A,NAV

WIRING HARNESS - EXTERNAL POWER, 115 VOLT AC, SINGLE PHASE FSC 6150 [Superseded: NAVY MS24122 REV C CANC NOTICE 3, NAVY MS24122 REV C VALID NOTICE 2, NAVY MS24122 REV C VALID NOTICE 1, NAVY MS24122 REV C, NAVY MS24122 REV B, NAVY MS24122 REV A, NAVTABLE IS ABOUT LENGTH, SIZE AND TERMINAL

WIRING HARNESS - EXTERNAL POWER, 115 VOLT AC, SINGLE PHASE FSC 6150 [Superseded: NAVY MS24122 REV C CANC NOTICE 3, NAVY MS24122 REV C VALID NOTICE 2, NAVY MS24122 REV C VALID NOTICE 1, NAVY MS24122 REV C, NAVY MS24122 REV B, NAVY MS24122 REV A, NAV

SAE AS4882A-2003 用于电缆或电线的快速释放,铰接,加衬垫的环形夹具

CLAMP, LOOP, CUSHIONED, HINGED, QUICK RELEASE - CABLE OR WIRETABLE 1 - DIMENSIONS

CLAMP, LOOP, CUSHIONED, HINGED, QUICK RELEASE - CABLE OR WIRE

NAVY MIL-H-904 J NOTICE 1-2003 手工操作悬挂钩空中吊运车电动起重机链(用以代替NAVY MIL-H-00904 G(1))

MIL-H-904J is inactive for new design and is no longer used, except for replacement purposes. Future acquisitions for new design of MIL-H-904J should be made under ASME HST-3, "Performance Standard for Manually Lever Operated Chain Hoists".

HOISTS, CHAIN, HAND-OPERATED, HOOK AND TROLLEY SUSPENSION [Use In Lieu Of: NAVY MIL-H-00904 G (1)]