V44 生命保障系统与设备 标准查询与下载

ARINC 760-1 ITEM 6.0-2000 精密着陆功能(空白部分)

Precision Landing Function (Blank Section)

Precision Landing Function (Blank Section)

ARINC 760-1 ITEM 7.0-2000 特高频航海功能(空白部分)

VHF Navigation Function (Blank Section)

VHF Navigation Function (Blank Section)

ARINC 760-1 ITEM 4.0-2000 飞行管理功能

Flight Management Function

Flight Management Function

BS 3N 3:2000 航空用供氧装置

This British Standard specifies the characteristics of liquid and gaseous oxygen supplied for the replenishment of airborne oxygen systems.

Breathing oxygen for airborne applications

NAVY A-A-59682-2000 25-救生筏等设备

This commercial item description identifies the requirements of the inflation valve for 25-person life rafts.

VALVE, INFLATION, 25-PERSON LIFERAFT

SAE ARP1398A-2000 氧气设备试验

This ARP delineates requirements for system cleanliness, test gas supply system, test stand design, environmental chamber definition, instrumentation, dynamic test equipment and testing procedures. The purpose of this SAE Aerospace Recommended Practice (ARP) is to establish or outline, or both, methods and procedures for use in testing oxygen equipment.

Testing of Oxygen Equipment

AP-121AA-07-1999 民用航空器在太平洋空域缩小垂直间隔标准（PVSM）运行适航合格审定程序

Airworthiness Certification Procedures for Civil Aircraft Reduced Vertical Separation Standard (PVSM) Operations in Pacific Airspace

BS 4N 100-1:1999 飞行器供氧系统和设备.设计和安装

This part of BS 4N 100 specifies the general design requirements for airborne oxygen breathing systems, including oxygen storage and generation equipment and ground support equipment. New tests are specified for compatibility of materials for use in the presence of oxygen. This part also provides some guidance and recommendations on the design and installation of items of equipment for use in oxygen systems. NOTE The guidance and recommendations contained herein may be used equally well in non-aerospace applications. In addition, for all equipment for aircraft oxygen systems, conformance to the relevant parts, sections and sub-sections of BS G 100 is specified.

Aircraft oxygen systems and equipment — Part 1: Design and installation

BS 4N 100-6:1999 飞行器供氧系统和设备.选择与氧一起使用的材料的指南和推荐方法

This part of BS N 100 provides guidance and recommendations on the selection of materials for use with oxygen to minimize the risk of ignition and combustion. The guidance and recommendations may be used equally well in non-aerospace applications.

Aircraft oxygen systems and equipment - Guidance and recommendations on the selection of materials for use with oxygen

BS 4N 100-5:1999 飞行器供氧系统和设备.与氧气有联的火灾和爆炸危害的防止指南

This part of BS N 100 provides guidance on the dangers, and avoidance of, fire and explosion hazards associated with oxygen.

Aircraft oxygen systems and equipment - Guide to fire and explosion hazards associated with oxygen

BS 4N 100-4:1999 飞行器供氧系统和设备.生理因素指南

This part of BS 4N 100 provides guidance on the physiological factors which should be considered when designing oxygen systems for use within aircraft.

Aircraft oxygen systems and equipment. Guide to the physiological factors

BS 4N 100-3:1999 飞行器供氧系统和设备.设备和系统的试验

This Part of BS N 100 provides guidance on the methods for testing equipment and systems for use with oxygen. It specifies the design of test rigs and test apparatus and it describes pressure testing and leakage testing of equipment.

Aircraft oxygen systems and equipment - Testing of equipment and systems

BS 4N 100-2:1999 飞行器供氧系统和设备.在有氧气情况下材料的兼容性试验

This part of BS N 100 specifies methods of test and interpretation of results for verifying conformance of non-metallic materials for use in oxygen enriched atmospheres.

Aircraft oxygen systems and equipment - Tests for the compatibility of materials in the presence of oxygen

SAE AS8662-1999 FSC 7340飞行员使用的带有护套的救生猎刀.代替1999年8月30日作废的MIL-K-8662E(1)

This specification covers the requirements for one type of a pilots survival, sheathed, hunting knife with a 5-inch blade and sharpening stone.

Knife, Hunting, Sheathed, Survival, Pilot磗 FSC 7340; Should Be Used Instead of MIL-K-8662E(1), Which Was Cancelled on 30 August 1999

ARINC 655 ITEM 3.0-1999 功能特征

Functional Characteristics

Functional Characteristics

SAE ARP217D-1999 对安装在飞机上的环境控制系统(ECS)的测试选择

This document deals with ground and flight test of airplane installed environmental control systems (ECS). The ECS provide an environment, controlled within specified operational limits of comfort and safety, for humans, animals, and equipment. These limits include the following: pressure, temperature, humidity, ventilation air velocity, ventilation rae, wall temperature, audible noise, vibration, and environment composition (ozone, contaminants, etc.). The ECS are composed of equipment, controls, and indicators that supply, distribute, recycle and exhaust air to maintain the desired environment.

Testing of Airplane Installed Environmental Control Systems (ECS)

SAE ARP1176-1999 氧气系统与部件的清洁和包装[代替:SAE AIR 1176B,SAE AIR 1176A,SAE AS 13591A,SAE AS 13591]

This SAE Aerospace Recommended Practice (ARP) provides recommended practices for cleaning aircraft oxygen equipment such as tubing, pieces parts (including regulator and valve parts), cylinders and ground-based equipment that may be used to support aircraft oxygen systems. These methods may apply to gaseous and liquid oxygen equipment. This document specifies work area details, methods to select suitable cleaning chemicals, cleaning methods, test methods to verify cleanliness level, and methods of packaging the components and parts after cleaning. Person designated to clean oxygen equipment should be qualified and trained to clean oxygen equipment. Cleanliness levels achieved are strongly dependent on the capabilities of the persons performing the cleaning operation.

Oxygen System and Component Cleaning and Packaging [Superseded: SAE AIR 1176B, SAE AIR 1176A, SAE AS 13591A, SAE AS 13591]

SAE AIR1390A-1999 飞机乘务员和乘客的氧气面具的便利位置

The purpose of this document is to provide basic guidelines for use by aircraft interior designers so that oxygen masks connected to oxygen supply systems and oxygen masks made available for use by passengers and crew members are readily accessible and the total system utilized in the event the necessity arises for use of oxygen during flight operations.

Convenient Location of Oxygen Masks for Both the Crew and Passengers of Aircraft

SAE AS8031A-1999 毒性和刺激性气体.航空运输飞行舱(久坐)机组人员的个人防护设备

This SAE Aerospace Standard (AS) covers any protection system that serves the stated purpose. This document establishes minimum performance requirements for emergency equipment, which provides flight deck (sedentary) crewmembers with eye and respiratory protection from toxic atmospheres during in-flight emergencies. Defintion of sedentary: sedentary is herein defined as those flight deck crewmembers that remain seated at their flight deck stations throughout the emergency. For those nonsedentary cabin crewmembers whose duty it is to leave their flight station during an emergency (for example, to actively locate and fight an on-board fire).

Personal Protective Devices for Toxic and Irritating Atmospheres Air Transport Flight Deck (Sedentary) Crewmembers

SAE AS8025A-1999 乘客氧气面罩

This standard covers oronasal type masks which use a continuous flow oxygen supply. Each such mask comprises a facepiece with valves as required, a mask suspension device, a reservoir, or rebreather bag (when used), a length of tubing for connection to the oxygen supply source, and a means for allowing the crew to determine if oxygen is being delivered to the mask. The assembly shall be capable of being stowed suitably to meet the requirements of its intended use. This standard establishes the minimum requirements for the design, construction and performance of continuous flow oxygen masks for passenger cabin occupants in civil commercial aircraft.

Passenger Oxygen Mask