V44 生命保障系统与设备 标准查询与下载

ISO 22538-3:2007 航天系统.氧气安全.第3部分:氧气系统及组件用非金属材料的选择

This part of ISO 22538 describes a process for the selection of non-metallic materials for oxygen systems and their components. This part of ISO 22538 applies equally to ground support equipment, launch vehicles and spacecraft.

Space systems - Oxygen safety - Part 3: Selection of non-metallic materials for oxygen systems and components

ISO 22538-4:2007 航天系统.氧气安全.第4部分:氧气系统及组件的危险分析

This part of ISO 22538 provides a process for conducting hazards analyses on parts, components and systems in oxygen and oxygen-enriched environments. This part of ISO 22538 identifies processes that may be used on ground support equipment, launch vehicles and spacecraft.

Space systems - Oxygen safety - Part 4: Hazards analyses for oxygen systems and components

SAE AS4468C-2007 引用水用内衬硅125 psi软管组件的采购规范

This SAE Aerospace Standard (AS) covers the requirements for a flexible, lightweight, low pressure, self-extinguishing, silicone hose assembly. The hose has a fully fluorinated fluoropolymer inner liner and is primarily intended for use in aircraft potable water systems.

Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification

ISO 11075:2007 航空器.除冰液和防冰液.ISO I型

This International Standard defines the requirements for ISO type I fluids used in the removal and prevention of ice, snow, or frost on exterior surfaces of main line and regional civil transport airplanes on the ground. This International Standard is applicable to de-icing/anti-icing fluids for use on airplanes in general. However, the applicability may have limitations for particular airplane types. It is the airplane operator’s responsibility to consult the aircraft operations manual, the aircraft maintenance manual and the service letters of the airplane manufacturer, to determine any limitations/restrictions relating to the use of de-icing/anti-icing fluids that conform to this International Standard for the type and model of airplane to be treated. See also ISO 11076.

Aircraft - De-icing/anti-icing fluids - ISO type I

GJB 1800A-2007 弹射座椅型乘员应急离机救生系统通用规范

本规范规定了敞开式向上弹射座椅型乘员应急离机救生系统的设计、制造、试验和验收通用技术要求。 本规范适用于敞开式向上弹射座椅型乘员应急离机救生系统（以下简称救生系统）单座或多座飞机救生系统。

Genereal specincation for ejection seat type of aircrew emergency escape system

GJB 5966-2007 军用直升机应急漂浮装置通用规范

本规范规定了军用直升机应急漂浮装置的通用技术要求。 本规范适用于军用直升机应急漂浮装置。

General specincation for emergency floatation gear of military helicopter

SAE ARP5252-2007 滑梯/救生筏的应急便携性

This SAE Aerospace Recommended Practice (ARP) recommends design features for facilitating relocation of portable slide/rafts for deployment at an alternate exit under ditching conditions.

Emergency Portability of Slide/Rafts

GJB 5868-2006 乘员应急离机救生系统弹射动力装置通用规范

本规范规定了乘员应急离机救生系统弹射动力装置（以下简称弹射动力装置）的通用技术要求、质量保证规定和交货准备等。 本规范适用于弹射动力装置的研制、生产、检验（试验）和验收，也适用于救生系统其他火箭发动机。

General specification for propulsion devices of aircrew emergency escape system

GJB 5869-2006 乘员应急离机救生系统弹射驱动装置通用规范

本规范规定了乘员应急离机救生系统弹药驱动装置（以下简称弹药驱动装置）的通用技术要求、质量保证规定和交货准备等。 本规范适用于乘员应急离机就生系统弹药驱动装置的设计、、制造、鉴定与验收。本规范不适用于火箭、火箭弹射器、燃气管路和外挂物分离机构。

General specification for cartridge actuated devices of the aircrew escape system

BS 5N 100-5:2006 航空器供氧系统和设备.包括搬运、储藏和补给与氧气相关的着火和爆炸危害指南

This part of BS N 100 provides guidance on the dangers, and avoidance of, fire and explosion hazards associated with oxygen. Annex A provides additional guidance and recommendations on liquid and gaseous oxygen handling, storage and aircraft replenishment.

Aircraft oxygen systems and equipment - Guide to fire and explosion hazards associated with oxygen, including handling, storage and replenishment

DIN EN 926-1:2006 滑翔伞设备.滑翔伞.第1部分:结构强度要求和试验方法

This European Standard is applicable to paragliders as defined in 2.1. This part of EN 926 specifies requirements and test methods for the resistance of a paraglider to static and dynamic loads and sets the minimum strength threshold for its qualification.

Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength; English version of DIN EN 926-1:2006-10

AIR FORCE QPL-6645-27 (1)-2006 一般规格的全体人员降落伞

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defens

PARACHUTES, PERSONNEL, GENERAL SPECIFICATION FOR

GJB 5583-2006 航弹伞通用规范

本规范规定了航弹伞的通用要求。 本规范适用于航弹伞设计、制造和验收。

General specification for aerial bomb parachute

GJB 5550-2006 机载跳伞供氧系统通用规范

本规范规定了军用飞机机载跳伞供氧系统、成品及附件的通用要求。

General specification for parachute oxygen supply system

GJB 2339A-2006 抛放弹通用规范

本规范规定了抛放弹的通用技术要求、质量保证规定和交货准备等内容。 本规范适用于飞机救生装置用抛放弹和机载悬挂装置用抛放弹的设计、制造和验收。其它用途抛放弹亦可参照使用。

General specification for cartridge

SAE AS861B-2006 供氧系统的一般最低标准

This standard covers all types of oxygen breathing equipment used in non-military aircraft. It is intended that this standard supplement the requirements of the detail specification or drawings of specific components or assemblies, e.g., regulators, masks, cylinders, etc. Where a conflict exists between this and detail specifications, detail specifications shall take precedence. This standard defines minimum general standards for the design, fabrication, testing, and packaging of oxygen breathing equipment.

Minimum General Standards for Oxygen Systems

HB 7789-2005 水分离器通用规范

本规范规定了水分离器的通用技术要求、质量保证规定和交货准备等。 本规范适用于水分离器的设备、试验及验收。

General specification for water separator

HB 7788-2005 飞机增压座舱温度控制系统通用规范

本规范规定了飞机增压座舱温度控制系统的通用技术要求、质量保证规定等。 本规范适用于飞机增压座舱温度控制系统（以下简称温度控制系统）的设计、制造与验收、非增压座舱温度控制系统的设计、制造也可参照使用。

General specification for pressurrized cabin temperature control system of aircraft

GJB 5468-2005 航空座椅弹射弹性能试验方法

本标准规定了航空座椅弹射弹性能试验的测试系统、试验程序及数据处理等内容。 本标准适用于航空座椅弹射的弹射初速、最大弹射过载、过载作用时间、最大过载增长速律、平均过载增长速率等性能参数的测试。

Test method of performance for aerial ejection seat cartridge

SAE AIR1609A-2005 飞机加湿

This SAE Aerospace Information Report (AIR) covers the design parameters for various methods of humidification applicable to aircraft, the physiological aspects of low humidities, the possible benefits of controlling cabin humidity, the penalties associated with humidification, and the problems which must be solved for practical aircraft humidification systems. The design information is applicable to commercial and military aircraft. The physiological aspects cover all aircraft environmental control applications. The purpose of this (AIR) is to provide guidelines for the design of aircraft humidification systems. Physiological effects of humidity levels on crew and passengers are reviewed. Various techniques used for cabin humidification are discussed and evaluated. Various potential problems and penalties associated with humidification systems are also described.

(R) Aircraft Humidification