V45 航空仪表 标准查询与下载

DIN EN 303213-4-1:2011 先进场面活动引导和控制系统(A-SMGCS).第4部分:包括其接口的部署非合作传感器用欧洲天空一体化互用性规则EC 552/2004下应用的团体规范

Advanced Surface Movement Guidance and Control System (A-SMGCS) - Part 4: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for a deployed non-cooperative sensor including its interfaces - Sub-pa

DIN EN 303213-1:2011 先进场面活动引导和控制系统(A-SMGCS).第1部分:A-SMGCS等级1包括外部接口用欧洲单一空中互操作性规则EC 552/2004下应用的共同体规范(英文版核准本)

Advanced Surface Movement Guidance and Control System (A-SMGCS) - Part 1: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 1 including external interfaces (Endorsement of the E

GJB 624.16-2010 军用飞机科研试飞训练要求 第16部分：显控仪表

本部分规定了有人驾驶固定翼飞机进行显控仪表科研试飞训练的通用要求。 本部分适用于有人驾驶固定翼飞机显控仪表科研试飞训练的技术准备、组织实施与评价。特种用途固定翼军用飞机可参照执行。

Training requirement of flight test research for military aircraft.Part 16:Display and control instruments

SAE ARP6137-2010 飞机轮胎压力监测系统(TPMS)

A tire pressure monitoring system (TPMS) is a means to electronically measure and report the current tire pressure. Some systems are capable of transmitting the information to the flight deck while other systems are for use on the ground by maintenance personnel (only). This SAE Aerospace Recommended Practice (ARP) document is intended to establish overall component and system function guidelines and minimum performance levels for a TPMS. The system should visually indicate the tire inflation pressure status. These guidelines include, but are not limited to: a) Design recommendations for system components, which: 1. monitor tire inflation, and, 2. are located in/on the tire/wheel assembly, landing gear axle, and/or aircraft avionics compartment. b) Recommended performance and safety guidelines for a TPMS.

Tire Pressure Monitoring Systems (TPMS) for Aircraft

IEEE 292/COR-2010 单一自由度弹簧受限比率陀螺仪用IEEE规范格式勘误表

Errata to IEEE Specification Format for Single- Degree-of-Freedom Spring-Restrained Rate Gyros

Errata to Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros

IEEE 517/COR-2010 自由度单一等级的弹簧受限比率陀螺仪规格尺寸和测试规程.勘误表

Specification format guide and test procedure for single-degree-of-freedom rate-integrating gyros; Errata

IEEE 529/COR-2010 单一自由度比率累计陀螺仪的捷联式应用IEEE标准规范格式指南和测试规程补充件勘误表

Errata to Supplement for Strapdown Applications to IEEE Standard Specification Format Guide and Test Procedures for Single- Degree-of-Freedom Rate-Intergrating Gyros

Errata to Supplement for Strapdown Applications to IEEE Standard Specification Format Guide and Test Procedures for Single-Degree-of-Freedom Rate-Intergrating Gyros

ASTM D6399-10 飞机座舱中空气质量测定用仪器和方法的选择的标准指南

This guide may be used to identify instruments and methods for measuring air quality in aircraft cabins. Such measurements may be undertaken to: Conduct monitoring surveys to characterize the aircraft cabin environment and to assess environmental conditions. Results of such measurements could then be compared with relevant standards or guidelines for assessment of health and comfort of passengers and flight attendants. Investigate passenger and flight attendant complaints; or Measure and compare the performance of new materials and systems for the aircraft cabin environment.1.1 This guide covers information and guidance for the selection of instrumentation and test methods for measuring air quality in aircraft passenger cabins as well as in areas limited to flightcrew access. 1.2 This guide assumes that a list of pollutants to be measured, or analytes of interest, which are present, or may be present, in aircraft cabins is available. 1.3 This guide provides information and guidance to identify levels of concern pertaining to public and occupational exposures to relevant air pollutants. This guide does not address levels of concern, if any, related to degradation of materials or aircraft components because of the presence of air pollutants. 1.4 Based on levels of concern for public and occupational exposures for each pollutant of interest, this guide provides recommendations for developing three aspects of data quality objectives (a) detection limit; (b) precision; and (c) bias. 1.5 This guide summarizes information on technologies for measurement of different groups or classes of air pollutants to provide a basis for selection of instruments and methods. The guide also identifies information resources on types of available measurement systems. 1.6 This guide provides general recommendations for selection of instruments and methods. These recommendations are based on concepts associated with data quality objectives discussed in this guide and the information on available instruments and methods summarized in this guide. 1.7 This guide is specific to chemical contaminants and does not address bioaerosols, which may be present in the cabin environment. 1.8 This guide does not provide details on use or operation of instruments or methods for the measurement of cabin air quality. 1.9 This guide does not provide information on the design of a monitoring strategy, including issues such as frequency of measurement or placement of samplers. 1.10 Users of this guide should be familiar with, or have access to, individuals who have a background in (a) use of instruments and methods for measurement of air pollutants and (b) principles of toxicology and health-effects of environmental exposure to air pollutants. 1.11 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.12 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins

SAE ARP5535-2009 可航空域激光安全观察仪

This document applies to safety observers or spotters involved with the use of outdoor lasersystems. It may be used in conjunction with SAE Aerospace Standard (AS4970) “HumanFactors Considerations for Outdoor Laser Operations in the Navigable Airspace.” Additionalcontrol measures may be applicable and are listed in ANSI Z-136.6-2000.1.1 Purpose:The purpose of this document is to provide guidance to proprietors for the optimal use ofsafety observers during operation of a laser system. It also recommends the minimumrequirements for a safety observer.1.2 Field of Application:SAE AS4970 and ANSI Z136.6 provide guidance and information for the evaluation oflaser operations in navigable airspace. Due to operational/mission requirements, somelaser beams may exceed the maximum permissible exposure (MPE) limits or visualinterference levels as defined in FAA Order 7400.2, ANSI Z136.1, and ANSI Z136.6. Theuse of laser safety observers as control measures to reduce the laser beam hazards to airnavigation are discussed.

Observers for Laser Safety in the Navigable Airspace

GJB 807A-2008 飞机仪表板布局通用要求

本标准规定了显示器、仪表、控制装置和灯光信号装置在飞机仪表板上布局和定位的通用要求。 本标准适用于军用飞机座舱仪表板布局。

General requirements for layout of aircraft instrument panel

GJB 1195A-2008 速率陀螺仪通用规范

本规范规定了速率陀螺仪的通用要求。 本规范适用于各类运载体上所使用的单自由度弹性约束速率陀螺仪（以下简称陀螺）。

General specification of rate gyroscopes

GJB 6347-2008 军用直升机数字视频记录仪通用规范

本规范规定了军用直升机数字视频记录仪通用技术要求。 本规范适用于军用直升机数字视频记录仪(以下简称记录仪,固定翼飞机记录仪也可参照采用。

General specification for digital video recorders of military helicopter

GJB 6368-2008 军用观瞄仪器定型试验规程

本标准规定了军用观瞄仪器设计定型试验的试验目的、试验条件、试验方法、数据处理及结果评定方法。 本标准适用于军用观瞄仪器设计定型试验和生产定型试验,其它相关试验亦可参照、执行。

Approval test procedure for military observation and sight instrument

GJB/J 6202-2008 一等环规检定装置校准规范

本标准规范规定了一等环规检定装置的计量特性、校准条件、校准项目、校准方法、校准结果的处理和复校时间间隔。 本标准规范适用于新制造（或新购置）、使用中、修理后的φ3mm～φ200mm一等环规检定装置的校准。

Calibration specification for device of measuring grade Ⅰring gauge

GJB 6211-2008 航空压力表通用规范

本规范规定了航空压力表的要求、质量保证规定和交货准备。 本规范适用于军用飞机和导弹发射系统中液压、气压和氧气系统的航空压力表（以下简称为压力表）的设计、制造、检验、鉴定和交付。

General specification for aviation pressure meter

HB 7826-2008 空速表通用规范

本规范规定了飞机空速表的要求、质量保证规定及交付准备。 本规范适用于飞机空速表的设计、制造、检验和交付。

General specification for airspeed indicator

HB 7877-2008 座舱高度压差表通用规范

本规范规定了飞机座舱高度压差表的要求、质量保证规定及交付准备。 本规范适用于飞机座舱高度压差表（以下简称压差表）的设计、制造、检验和交付。

General specification for cabin altitude and pressure difference gauge

GJB 6400-2008 战术导弹用光纤陀螺仪通用规范

本规范规定了战术导弹用光纤陀螺仪的技术要求、质量保证规定和交货准备。 本规范适用于战术导弹用光纤陀螺仪的设计、制造、检验和交付。其它用途的光纤陀螺仪也可参照使用。

General specification for the fiber-optic gyroscope of tactical missile

HB 7828-2008 马赫数表通用规范

本规范规定了飞机马赫数表的要求、质量保证规定及交付准备。 本规范适用于马赫数表的设计、制造、检验和交付。

General specification for machmeter

IEEE 1431/COR 1-2008 科里奥利振动陀螺用规范格式指南和试验程序.技术勘误1:图1.陀螺仪的轴和偏离角

Specification format guide and test procedure for coriolis vibratory gyros - Corrigendum 1: Figure 1 - Gyro axes and misalignment angles