V72 航天器动力系统 标准查询与下载

QJ 3203-2005 小推力液体推进系统表面张力贮箱通用规范

本规范规定了小推力液体推进系统表面张力贮箱的技术要求、质量保证规定和交货准备。 本标准适用于航天器用小推力推进系统表面张力贮箱（以下简称贮箱）的研制、生产、试验和验收。

General specification for surface tension tank of low-thrust liquid propulsion system

GJB 5400-2005 氢氧火箭发动机阀门用金属波纹管规范

本规范规定了氢氧火箭发动机阀门用金属波纹管（以下简称波纹管）的要求、质量保证规定、交货准备等。 本规范适用于波纹管的试制、制造、检验与验收。

Specification for valve metal bellows of hydrogen-oxygen rocket engine

QJ 3214-2005 复合固体推进剂研制生产单位安全评价

本标准规定了航天复合固体推进剂研制生产单位安全评价的项目、内容、方法和等级。 本标准适用于航天复合固体推进剂研制生产单位的安全生产现状的安全评价。

Safety evaluation for factory on research, development and production composite solid propellant

QJ 3208-2005 火箭推进剂输送系统金属膜盒式蓄压器通用规范

本规范规定了火箭推进剂输送系统金属膜盒式蓄压器（以下简称蓄压器）的技术要求、质量保证规定和交货准备。 本规范适用于运载火箭推进剂输送系统金属膜盒式蓄压器设计、生产和试验。

General specification for metal aneroid accummulator of rocket propellant transfer system

CISPR 12 Edition 5.1-2005 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

The limits in this International Standard are designed to provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential environment. Compliance with this standard may not provide adequate protection for new types of radio transmissions or receivers used in the residential environment nearer than 10 m to the vehicle or device. NOTE 1 Experience has shown that compliance with this standard may provide satisfactory protection for receivers of other types of transmissions when used in the residential environment, including radio transmissions in frequency ranges other than that specified. This standard applies to the emission of broadband and narrowband electromagnetic energy which may cause interference to radio reception and which is emitted from a) vehicles propelled by an internal combustion engine, electrical means or both (see 3.1); b) boats propelled by an internal combustion engine, electrical means or both (see 3.2). Boats are to be tested in the same manner as vehicles except where they have unique characteristics as explicitly stated in this standard; c) devices equipped with internal combustion engines (see 3.3). This standard includes limits and test methods for both broadband and narrowband emissions. This standard does not apply to aircraft, traction systems (railway, tramway and trolley bus), or to incomplete vehicles. NOTE 2 Protection of receivers used on board the same vehicle as the disturbance source(s) are covered by CISPR 25. The measurement of electromagnetic disturbances while the vehicle is connected to power mains for charging is not covered in this standard. The user is referred to appropriate IEC and CISPR standards which define measurement techniques and limits for this condition.

Vehicles,boats,and internal combustion engine driven devices-Radio disturbance characteristics-Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices

CISPR 20 Edition 5.2-2005 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This standard for immunity requirements applies to television broadcast receivers, sound broadcast receivers and associated equipment intended for use in the residential, commercial and light industrial environment. This standard describes the methods of measurement and specified limits applicable to sound and television receivers and to associated equipment with regard to their immunity characteristics to disturbing signals. This standard is also applicable to the immunity of outdoor units of direct to home (DTH) satellite receiving systems for individual reception. NOTE 1 Receiving systems for collective reception, in particular cable distribution head ends (Community Antenna Television, CATV) and community reception systems (Master Antenna Television, MATV) are covered by IEC 60728-2. NOTE 2 Broadcast receivers for digital signals are covered by Annex I and Annex J.

Sound and television broadcast receivers and associated equipment-lmmunity characteristics-Limits and methods of measurement

CISPR 16-4-1 Edition 1.1-2005 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This part of CISPR 16-4 gives guidance on the treatment of uncertainties to those who are involved in the development or modification of CISPR electromagnetic compatibility (EMC) standards. In addition, this part provides useful background information for those who apply the standards and the uncertainty aspects in practice. The objectives of this part are: a) to identify the parameters or sources governing the uncertainty associated with the statement that a given product complies with the requirement specified in a CISPR recommendation. This uncertainty will be called ‘standards compliance uncertainty’ (abbreviated as SCU, see 3.16); b) to give guidance on the estimation of the magnitude of the standards compliance uncertainty; c) to give guidance for the implementation of the standards compliance uncertainty into the compliance criterion of a CISPR standardised compliance test. As such, this part can be considered as a handbook that can be used by standards writers to incorporate and harmonise uncertainty considerations in existing and future CISPR standards. This part also gives guidance to regulatory authorities, accreditation bodies and test engineers to judge the performance quality of an EMC test-laboratory carrying out CISPR standardised compliance tests. The uncertainty considerations given in this part can also be used as guidance when comparing test results (and its uncertainties) obtained by using different alternative test methods. The uncertainty of a compliance test also relates to the probability of occurrence of an electromagnetic interference (EMI) problem in practice. This aspect is recognized and introduced briefly in this part. However, the problem of relating uncertainties of a compliance test to the occurrence of EMI in practice is not considered within the scope of this part. The scope of this part is limited to all the relevant uncertainty considerations of a standardized EMC compliance test.

Specification for radio disturbance and immunity measuring apparatus and methods-Part 4-1:Uncertainties,statistice and limit modelling-Uncertainties in standardized EMS tests

CISPR 22 AMD 1-2004 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

QJ 2748A-2004 固体火箭发动机密封结构通用技术要求

General technical requirements for seal structure of solid rocket motor

QJ 3199-2004 固体火箭发动机燃烧室壳体通用规范

General specification for chamber case of solid rocket motor

QJ 2406A-2005 固体火箭发动机可靠性设计要求和评审

本标准规定了固体火箭发动机(以下简称发动机）可靠性模型建立、可靠性分配、可靠性预计、可靠性设计准则、故障模式及影响分析、可靠性关键项目等主要工作项目及其评审要求。 本标准适用于战略、战术导弹及宇航用发动机可靠性设计及评审。

Requirement and review for reliability design of solid rocket motor

QJ 1453A-2004 固体火箭发动机燃烧室药柱通用规范

本规范规定了固体火箭发动机燃烧室药柱(含衬层、限燃层，下同) 设计、制造、性能、环境适应 性、检验及交货准备等基本要求。 本规范适用于复合固体推进剂燃烧室药柱(以下简称药柱) 的设计、制造、检验等。

General specification for chamber grain of solid rocket motor

QJ 1393A-2004 固体火箭发动机热力学计算方法和计算机程序

Calculate method and computer program of solid rocket motor thermodynamic

QJ 2038.1A-2004 固体火箭发动机燃烧室界面粘接强度测试方法 第1部分：矩形试件扯离法

Test method for interface bonding strength of solid rocket motor chamber--Part 1: Unstick test for rectangular specimen

QJ 1003A-2004 液体火箭发动机设计程序

Design procedure for liquid propellant rocket engine

QJ 1488A-2004 固体火箭发动机燃烧室绝热层、衬层、人工脱粘层通用规范

General specification for chamber insulation, liner and stress release boot of solid rocket motor

QJ 1004A-2004 固体火箭发动机静止试验程序

Stable test procedures of solid rocket motor

CISPR 29/TR-2004 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This Technical Report describes the algorithms used for objective picture assessment in immunity tests of analogue and digital TV broadcast receivers and associated equipment. The algorithms used were developed on the basis of the specifications included in Annex K1 of CISPR 20. The method of objective picture assessment described in that annex employs the same interference mechanism and is based on the same wanted signal definition as specified in CISPR 20. Objective picture assessment, therefore, constitutes an alternative to the subjective method and offers the advantage of direct correlation to the subjective method.

Television broadcast receivers and associated equipment - Immunity characteristics - Methods of objective picture assessment

CISPR 16-1-2 Edition 1.1-2004 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2:Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

CISPR 11 AMD 1-2004 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This standard is (Amendment 1) Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

(Amendment 1) Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement