V72 航天器动力系统 标准查询与下载

CISPR 16-1-2 AMD 1-2004 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This standard is (Amendment 1) Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2:Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

(Amendment 1) Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2:Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

CISPR 16-1-1-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages, currents and fields in the frequency range 9 kHz to 18 GHz. In addition, requirements are specified for specialized equipment for discontinuous disturbance measurements. The requirements include the measurement of broadband and narrowband types of radio disturbance. The receiver types covered include the following: a) the quasi-peak measuring receiver, b) the peak measuring receiver, c) the average measuring receiver, d) the r.m.s. measuring receiver. In addition there are specifications for spectrum analyzers, scanning receivers and audio-frequency voltmeters. The requirements of this publication shall be complied with at all frequencies and for all levels of radio disturbance voltages, currents, power or field strengths within the CISPR indicating range of the measuring equipment. CISPR 16-1 has been reorganised into 5 parts, to accommodate growth and easier maintenance. This first edition of CISPR 16-1-1, together with CISPR 16-1-2, CISPR 16-1-3, CISPR 16-1-4 and CISPR 16-1-5, cancels and replaces the second edition of CISPR 16-1, published in 1999, amendment 1 (2002) and amendment 2 (2003). It contains the relevant clauses of CISPR 16-1 without technical changes.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1:Radio disturbance and immunity measuring apparatus - Measuring apparatus

CISPR 16-2-3-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This part of CISPR 16 is designated a basic standard, which specifies the methods of measurement of radiated disturbance phenomena in the frequency range 9 kHz to 18 GHz.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3:Methods of measurement of disturbances and immunity - Radiated disturbance measurements

CISPR 16-1-3-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and calibration of the absorbing clamp for the measurement of radio disturbance power in the frequency range 30 MHz to 1 GHz. CISPR 16-1 has been reorganised into 5 parts, to accommodate growth and easier maintenance. This first edition of CISPR 16-1-3, together with CISPR 16-1-1, CISPR 16-1-2, CISPR 16-1-4 and CISPR 16-1-5, cancels and replaces the second edition of CISPR 16-1, published in 1999, amendment 1 (2002) and amendment 2 (2003). It contains the relevant clauses of CISPR 16-1 without technical changes.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3:Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-4-2-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This part of CISPR 16 is designated a basic standard, which specifies the manner in which measurement uncertainty is to be taken in to account in determining compliance with CISPR limits. The material is also relevant to any EMC test when interpretation of the results and conclusions reached will be impacted by the uncertainty of the instrumentation used during the testing. Annex A contains the background material used in providing the amount of measurement uncertainty found in generating the CISPR values shown in Clause 4 and hence provides valuable background material for those needing both initial and further information on measurement uncertainty and how to take into account individual uncertainties in the measurement chain. The annex however is not intended to be a tutorial of user manual or to be copied when making uncertainty calculations. For that, the references shown in the bibliography should be used. Measurement instrumentation specifications are given in CISPR 16-1, while the methods of measurement are covered in CISPR 16-2. Further information and background on CISPR and radio disturbances is given in CISPR 16-3. The other parts of CISPR 16-4 contain further information on uncertainties in general, statistics and limit modelling.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2:Uncertainties,statistics and limit modelling - Uncertainty in EMC measurements

CISPR 16-3/TR-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This part of CISPR 16 contains specific technical reports and information on the history of CISPR. Over the years, the CISPR prepared a number of recommendations and reports that have significant technical merit but were not generally available. Reports and recommendations were for some time published in CISPR 7 and 8. At its meeting in Campinas, Brazil, in 1988, subcommittee A agreed on the table of contents of part 3 and to publish the reports for posterity by giving the reports a permanent place in part 3. With the reorganization of CISPR 16 in 2003, the significance of CISPR limits has been moved to CISPR 16-4-3, whereas recommendations on statistics of disturbance complaints and on the report on the determination of limits has been moved to CISPR 16-4-4. The contents of Amendment 1 (2002) has been moved to CISPR 16-4-1.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 3:CISPR technical reports

CISPR 16-2-1-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1:Methods of measurement of disturbances and immunity - Conducted disturbance measurements

CISPR 16-2-2-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2:Methods of measurement of disturbances and immunity - Measurement of disturbance power

CISPR 16-1-2-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2:Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

CISPR 16-1-4-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This part of CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz. Specifications for ancillary apparatus are included for: antennas and test sites, TEM cells, and reverberating chambers. The requirements of this publication shall be complied with at all frequencies and for all levels of radiated disturbances within the CISPR indicating range of the measuring equipment. Methods of measurement are covered in Part 2-3, and further information on radio disturbance is given in Part 3 of CISPR 16. Uncertainties, statistics and limit modelling are covered in Part 4 of CISPR 16.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4:Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances

CISPR 16-4-1/TR-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This technical report gives guidance on the treatment of uncertainties to those who are involved in the development or modification of CISPR electromagnetic compatibility (EMC) standards. In addition, this part provides useful background information for those who apply the standards and the uncertainty aspects in practice. The objectives of this technical report are: a) to identify the parameters or sources governing the uncertainty associated with the statement that a given product complies with the requirement specified in a CISPR recommendation. This uncertainty will be called 'standards compliance uncertainty'. b) to give guidance on the estimation of the magnitude of the standards compliance uncertainty; c) to give guidance for the implementation of the standards compliance uncertainty into the compliance criterion of a CISPR standardised compliance test. As such, this part can be considered as a handbook that can be used by standards writers to incorporate and harmonise uncertainty considerations in existing and future CISPR standards. This part also gives guidance to regulatory authorities, accreditation bodies and test engineers to judge the performance quality of an EMC test-laboratory carrying out CISPR standardised compliance tests. The uncertainty considerations given in this part can also be used as guidance when comparing test results (and its uncertainties) obtained by using different alternative test methods. CISPR 16-3 has been reorganised into 4 parts, to accommodate growth and easier maintenance. This first edition of CISPR 16-4-1, together with CISPR 16-4-3, CISPR 16-4-4 and the second edition of CISPR 16-3, cancels and replaces the first edition of CISPR 16-3, published in 2000, and its amendment 1 (2002). It contains the relevant clauses of CISPR 16-3 without technical changes.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1:Uncertainties,statistics and limit modelling - Uncertainties in standardized EMC tests

CISPR 16-1-5-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This part of CISPR 16 is designated a basic standard which specifies the requirements for calibration test sites, used to perform antenna calibrations, as well as the test antenna characteristics, calibration site verification procedure and site compliance criteria. Further information on calibration site requirements, test antenna considerations and the theory of antennas and site attenuation is provided in informative annexes. Measurement instrumentation specifications are given in CISPR 16-1-1 and CISPR 16-1-4. Further information and background on uncertainties in general is given in CISPR 16-4-1, which may be helpful in establishing uncertainty estimates for the calibration processes of antennas.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5:Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1000 MHz

CISPR 16-2-4-2003 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法

This part of CISPR 16 is designated a basic standard, which specifies the methods of measurement of immunity to EMC phenomena in the frequency range 9 kHz to 18 GHz.

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4:Methods of measurement of disturbances and immunity - Immunity measurements

QJ 3166-2003 液氧/煤油发动机涡轮泵与燃气发生器联合试验方法

Combined test method of liquid oxygen/kerosene engine turbo pump and gas generator

QJ 3159.2-2002 弹用涡轮喷气发动机试验数据处理方法 第2部分:高空模拟试验

本部分规定了弹用涡轮喷气发动机高空模拟试验中测量数据的处理方法。 本部分适用于弹用涡轮喷气发动机高空模拟试验的数据处理。弹用涡轮风扇 发动机高空模拟试验数据处理可参照执行。

Method of test data processing for missile used turbojet-Part2:High altitude simulation test

QJ 3159.3-2002 弹用涡轮喷气发动机试验数据处理方法 第3部分:飞行试验

Method of test data processing for missile used turbojet-Part3:Flight test

QJ 1136A-2002 固体火箭发动机冲击试验方法

本标准规定了固体火箭发动机《以下简称发动机》 冲击试验的目的、条件、技术要求(含安全 技术要求) 、程序和结果评定等。 本标准适用于战略、战术导弹和宇航运载用发动机冲击试验，也适用于发动机部组件冲击试验。

Shock test method for solid rocket motors

QJ 1135A-2002 固体火箭发动机振动试验方法

本标准规定了固体火箭发动机(以下简称发动机) 的正弦与随机振动试验的目的、条件、技术 要求(含安全技术要求) 、程序和结果评定等。 本标准适用于战略、战术导弹和宇航运载用发动机的振动试验，也适用于发动机部组件及其结 构模型振动试验。

Vibration test method for solid rocket motors

QJ 3149-2002 液体火箭发动机吊装安全规定

本标准规定了液体火箭发动机吊装的一般安全技术要求和吊装过程安全规定。 本标准适用于液体火箭发动机(以下简称发动机) 在总装车间和试验台的吊装，其它场所的吊 装可参照执行。

Safety rules for hoisting of liquid rocket engine

QJ 3144-2002 复合固体推进剂厂房危险等级和安全距离的确定

本标准规定了复合固体推进剂(以下简称推进剂) 及其生产工序和厂房(包括工房和库房) 的 危險等級、安全距離及其確定方法和防護士堤等要求。 本标准适用于推进剂及其制品厂房新建、改建、扩建时，确定产品危险等级、厂房危险等级和 安全距离。

Determination for hazard classification and safe distance of composite solid propellant workshop building