W55 纺织制品综合 标准查询与下载

ISO 13029:2012 纺织品.动态条件下利用改良的热阻湿租测试仪进行干燥速率测定

This International Standard specifies a method for measuring the drying rate of fabric products for sports, leisure use or underwear, that have contact with the skin in their normal use, and other similar fabric products. The method is not applicable to textiles that cannot be permeated by water vapour or for those textiles which are more than 5 mm thick.

Textiles - Determination of drying rate in dynamic state by the modified sweating-guarded hotplate

ISO 13629-1:2012 纺织品.纺织产品抗真菌性测定.第1部分:发光法

Textiles - Determination of antifungal activity of textile products - Part 1: Luminescence method

NF G07-136:2012 纺织品.织物试验用家庭洗涤和烘干程序

Textiles - Domestic washing and drying procedures for textile testing.

ISO/TR 11827:2012 纺织品.成分测试.纤维鉴定

Textiles - Composition testing - Identification of fibres

ISO 12027:2012 纺织品.棉纤维粘性.糖色彩反映探测

Textiles - Cotton-fibre stickiness - Detection of sugar by colour reaction

SN/T 2558.3-2012 进出口功能性纺织品检验方法.第3部分：免烫性能

SN/T 2558的本部分规定了进出口纺织品的免烫性能要求、试验方法和检验规则。 本部分适用于具有免烫性能要求的进出口功能性纺织品。

Method for the inspection of functional textiles for import and export.Part 3:Iron-free performance

NF G08-004*NF EN ISO 3758:2012 纺织品.使用符号的保养标签规则

Textiles - Care labelling code using symbols.

DIN EN 14362-1:2012 纺织品.衍生自偶氮染色剂的特定芳香胺的测定方法.第1部分:没经过萃取取得的特定偶氮染色剂使用的检测.德文版本 EN 14362-1-2012

Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres; German version EN 14362-1:2012

DIN CEN/TR 16298:2012 纺织品和纺织产品.智能纺织品.定义,分类,应用和标准化需要.德文版本 CEN/TR 16298-2011

Textiles and textile products - Smart textiles - Definitions, categorisation, applications and standardization needs; German version CEN/TR 16298:2011

BS EN 13772:2011 织物和纺织品.燃烧性能.幕布和窗帘.着火的垂直取向样品的火焰蔓延测量

Textiles and textile products. Burning behaviour. Curtains and drapes. Measurement of flame spread of vertically oriented specimens with large ignition source

DIN EN ISO 105-B10:2012 纺织品.色牢度测验.第B10部分:人工气候老化.暴露于过滤氙弧辐射(ISO 105-B10-2011).德文版 EN ISO 105-B10-2011

Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011); German version EN ISO 105-B10:2011

ASTM D4850-12 织物和织物试验方法的有关标准术语

1.1 This terminology covers definitions of technical terms used in the industry related to textile fabrics. Terms that are generally understood or adequately defined in other readily available sources are not included. Other terminology standards that have terms related to textile fabrics are shown in 2.1

Standard Terminology Relating to Fabrics and Fabric Test Methods

ASTM D6544-12 紫外线(UV)传输测试前纺织品制备标准规程

The significance of this practice is that cloth, labeled as UV-protective, which will ultimately be submitted for UV transmittance testing will be in a state that simulates their condition at the end of two years of normal seasonal use. Therefore, the UV-protection level ultimately placed on a label estimates the maximum UV transmittance of the garment fabric during a two-year life cycle.1.1 This practice covers standardized exposures to laundering, simulated sunlight, and chlorinated pool water to which cloth, labeled as ultraviolet-(UV) protective, must be exposed prior to testing for UV transmission. 1.2 This practice leads to measurement of the residual level of UV-protection in fabrics or garments labeled as sun- or UV-protective, after exposure to conditions that relate to about two years of seasonal use. The UV transmission measurements may be done in accordance with AATCC Test Method 183 using fabrics prepared in accordance with this practice. This measurement may be used in support of a label statement regarding UV protection. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing

ASTM D6603-12 防紫外线纺织品标识的标准规格

1.1 This standard describes labeling requirements for textile products intended for the protection of humans from UVA and UVB radiation. 1.2 This standard is not intended to be used for the labeling of medical-device sun protective fabrics and clothing whose labeling is specified in the U.S. Food and Drug Administration's Draft Guidance for the Preparation of a Premarket Notification document. 1.3 The label requirements are in addition to those required by the Care Labeling Rule and fiber content (composition) labeling acts (Wool Products Labeling Act of 1939, and The Textile Fiber Products Identification Act). 1.4 This document contains terminology to be used in the labeling of UV-protective textiles. 1.5 Labeling recommended in this specification will be based on UV protection data collected by instrumental methods.

Standard Specification for Labeling of UV-Protective Textiles

ASTM D3990-12(2016) 织物瑕疵的相关标准术语

1.1 This terminology covers defects in both woven and knit fabrics. Descriptions of the defects, illustrations, and related material are given under the most frequently used terms; synonym(s) are listed in parentheses and cross referenced.

Standard Terminology Relating to Fabric Defects

ASTM D276-12 识别纺织品中纤维的标准试验方法

These test methods are a generally reliable means of identifying the generic types of fibers present in a sample of textile material of unknown composition. The methods are generally not useful for distinguishing fibers of the same generic class from different manufacturers or for distinguishing different fiber types of the same generic class from one producer. Many fibers are chemically modified by their producers in various ways so as to alter their properties. It is possible for such modifications to interfere seriously with the analyses used in these test methods. Considerable experience and diligence of the analyst may be necessary to resolve satisfactorily these difficulties. Dyes, lubricants, and delustrants are not present normally in amounts large enough to interfere with the analyses. These test methods are not recommended for acceptance testing of commercial shipments because of the qualitative nature of the results and because of the limitations previously noted. Note 28212;For statements on precision and bias of the standard quantitative test methods for determining physical properties for confirmation of fiber identification refer to the cited test method. The precision and bias of the nonstandard quantitative test methods described are strongly influenced by the skill of the operator. The limited use of the test methods for qualitative identification cannot justify the effort that would be necessary to determine the precision and bias of the techniques. 5.5 Qualitative and quantitative fiber identification is actively pursued by Committee RA24 (Fiber Identification) of AATCC and presented in AATCC Test Method 20 and Test Method 20A. Since precision and bias development is also part of the AATCC test methods, both AATCC and ASTM D13 have agreed that new development will take place in RA24. However, because there is valuable information still present in the ASTM standards, Test Methods D276 and D629 will be maintained as active standards by ASTM.1.1 These test methods cover the identification of the following textile fibers used commercially in the United States: Acetate (secondary)Nylon Acrylic Nytril Anidex Olefin Aramid Polycarbonate AsbestosPolyester Cotton Ramie Cuprammonium rayonRayon (viscose) Flax Saran FluorocarbonSilk Glass Spandex Hemp Triacetate Jute Vinal LycocellVinyon ModacrylicWool Novoloid 1.2 Man-made fibers are listed in 1.1 under the generic names approved by the Federal Trade Commission and listed in Terminology

Standard Test Methods for Identification of Fibers in Textiles

ASTM D4966-12e1 纺织品耐磨性的标准试验方法(马丁代尔(Martindale)磨损试验机法)

5.1 Acceptance Testing—this test method is not considered satisfactory for acceptance testing of commercial shipments of fabric. The between-laboratory precision of this test method is poor and, because of the nature of abrasion testing itself, technicians frequently fail to obtain results in agreement on the same type of testing instrument, both within and between laboratories. Although this test method is not recommended for acceptance testing, it is useful because it is used widely, especially outside the United States. 5.1.1 In case of a dispute arising from differences in reported test results when using this test method for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens that are as homogeneous as possible and that are from a lot of material of the type in question. The test specimens then should be assigned randomly in equal numbers to each laboratory for testing. The average results from the two laboratories should be compared using Students t-test for unpaired data and an acceptable probability level chosen by the two parties before the testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results in light of the known bias. 5.2 The resistance to abrasion also is affected greatly by the conditions of the tests, such as the nature of abradant; variable action of the abradant over the area of specimen abraded, the tension on the specimen, the pressure between the specimen and abradant, and the dimensional changes in the specimen. 5.3 Abrasion tests are all subject to variation due to changes in the abradant during specific tests. The abradant must be changed accordingly at frequent intervals or checked periodically against a standard. With disposable abradants, the abradant is used only once or changed after limited use. With permanent abradants that use hardened metal or equivalent surfaces, it is assumed that the abradant will not change appreciably in a specific series of tests, but obviously similar abradants used in different laboratories will not likely change at the same rate due to differences in usage. Permanent abradants also may change due to pick up of finishing or other material from test fabrics and must accordingly be cleaned at frequent intervals. The measurement of the relative amount of abrasion also may be affected by the method of evaluation and may be influenced by the judgment of the operator. 5.4 The resistance of textile materials to abrasion as measured on a testing machine in the laboratory is generally only one of several factors contributing to wear performance or durability as experienced in the actual use of the material. While “abrasion resistance” (often stated in terms of the number of cycles on a specified machine, using a specified technique to produce a specified degree or amount of abrasion) and “durability” (defined as the ability to withstand deterioration or wearing out in use, including the effects of abrasion) frequently are related, the relationship varies with different end uses, and different factors may be necessary in any calculation of predicted durability from specific abrasion data.

Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)

KS K ISO 3018:2011 铺地织物.长方形铺地织物.尺寸的测定

이 표준은 길이 대 너비의 비율이 5 미만인 수직 및 기계직의 직사각형 텍스타일 바닥재의

Rectangular textile floor coverings－Determination of dimensions

KS K ISO 8543:2011 铺地织物.质量的测定方法

이 표준은 단위면적당 총 질량, 단위면적당 총 파일 질량, 기포 위 단위면적당 파일 질량의

Textile floor coverings－Methods for determination of mass

KS K ISO 23232:2011 纺织品.拒水性.水/乙醇溶液电阻试验

이 표준은 수성(aqueous) 오염 물질에 대한 저항성을 평가하는 데 적용한다. 이 표준

Textiles-Aqueous liquid repellency-Water/alcohol solution resistance test