W63 针织品 标准查询与下载

FZ/T 73020-2004 针织休闲服装

本标准规定了针织休闲服装产品的号型、要求、试验方法、判定规则、标志、包装、运输和贮存。 本标准适用于鉴定以针织面料为主要材料制成的针织休闲服装的品质。

Knitted Casual Wear

FZ/T 73019.2-2004 针织塑身内衣 调整型

本标准规定了针织塑身内衣调整型产品的定义、分类和型号、要求、试验方法、判定规则、产品使用说明、包装、运输、贮存。 本标准适用于以经编、纬编针织面料为主要材料制成的针织塑身内衣调整型产品。

Adjustable knitted shapewear

FZ/T 73019.1-2004 针织塑身内衣 弹力型

本标准规定了针织塑身内衣弹力型产品的号型、要求、试验方法、判定规则、产品使用说明和包装。 本标准适用于鉴定弹力型针织塑身内衣及无侧边缝型针织塑身内衣产品的品质。

elastic knitted shapewear

FZ/T 73013-2004 针织泳装

本标准规定了针织泳装的产品分类和型号、要求、试验方法、判定规则及产品使用说明、包装、运输、贮存。 本标准适用于鉴定氨纶与锦纶交织而成的经编、纬编针织泳装产品。其他纺织纤维制成的针织泳装可参照执行。

Knitted swimming suits

FZ/T 73022-2004 针织保暖内衣

本标准规定了针织保暖内衣产品号型、要求、试验方法、判定规则、标志和包装。 本标准适用于鉴定针织保暖内衣产品的品质。本标准不适用于絮片类产品。

knitted thermal underwear

DIN EN 13770:2002 纺织品.针织鞋袜耐磨性的测定; 德文版本 EN 13770:2002

The document specifies test methods for the determination of the abrasion resistance of knitted footwear garments such as ankle socks, socks, hoses, and half-hoses, and heavy stockings. The test methods apply to any of these articles, whatever is their size, composition and structure.

Textiles - Determination of the abrasion resistance of knitted footwear garments; German version EN 13770:2002

FZ/T 73005-2002 低含毛混纺及仿毛针织品

本标准规定了低含毛混纺及仿毛针织品的技术要求、试验方法、检验规则和包装、标志等全部技术特征。 本标准适用于鉴定含毛30%以下的低含毛混纺针织品以及非毛纤维纯纺或混纺的仿毛针织品的品质。

Low wool content and wool like knitting goods

FZ/T 73018-2002 毛针织品

本标准规定了毛针织品的分类、技术要求、试验方法、检验规则和包装、标志等全部技术特征。 本标准适用于鉴定精、粗梳纯毛针织品和含毛30%及以上的毛棍纺针织品的品质。

Wool knitting goods

FZ/T 73008-2002 针织T恤衫

本标准规定了针织T恤衫产品的分类、要求、试验方法、判定规则、标志、包装、运输和贮存。 本标准适用于鉴定针织T恤衫的品质。

Knitted T-shirt

FZ/T 73007-2002 针织运动服

本标准规定了针织运动服的产品分类、要求、试验方法、判定规则、标志、包装、运输和贮存。 本标准适用于鉴定针织运动服的品质。

Knitted sportwear

ASTM D4771-02 室内家具编织装饰用纤维的标准性能规范

1.1 This specification covers the performance requirements for knitted upholstery fabrics as used in the manufacture of new indoor furniture for general domestic use. These requirements apply to both the wale and course directions for those factors where each fabric direction is pertinent. 1.2 This specification is not applicable to fabrics used in contract, porch, deck, or lawn furniture; nor for woven fabrics, bonded or laminated fabrics, or surface-coated fabrics (such as vinyls and urethanes). 1.3 The following safety hazards caveat pertains only to the test methods described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Note 2.

Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture

ASTM D4035-02(2008) 针织领带和围巾织物的标准性能规范

Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D 4035 except for the following characteristic(s).” Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods.1.1 This performance specification covers knitted necktie and scarf fabrics composed of any textile fiber or mixture of textile fibers. 1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Knitted Necktie and Scarf Fabrics

ASTM D3996-02(2008) 针织泳装织物的标准性能规范

Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D 3996 except for the following characteristic(s).” Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods.1.1 This performance specification covers circular and warp knitted fabrics for use in knit swimwear, composed of any textile fiber or mixture of textile fibers. 1.2 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.3 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Knit Swimwear Fabrics

ASTM D3782-02(2008) 男人及男孩用针织套装织物和针织运动夹克、运动裤及裤子织物的标准性能规范

Knitted fabrics should meet all of the requirements in Table 1 to be suitable for use in the manufacture of dress suits and sportswear jackets, slacks, and trousers for men and boys. It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable some fabrics that do not conform to all of the requirements in Table 1. For example, the fabric could be dyed in shades that do not meet the requirement in Table 1 for colorfastness to light, yet be acceptable to the ultimate consumer because the shade is fashionable. In such cases, one or more of the requirements may be modified by mutual agreement between the purchaser and the seller. If any of the requirements in Table 1 are modified by mutual agreement between the purchaser and the seller, any reference to the specification shall specify that “this fabric meets ASTM Specification D 3782 except for the following characteristic(s).” The uses and significance of particular properties are discussed in the appropriate sections of the specific methods.1.1 This performance specification covers men''s and boys'' knitted dress suit and knitted sportswear jacket, slack, and trouser fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance specification is not applicable to knitted fabrics used for interlinings. 1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Men''s and Boys'' Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics

ASTM D4037-02(2013) 机织、针织或植绒床罩织物的标准性能规格

4.1 Fabrics intended for this end-use should meet all of the requirements listed in Table 1. 4.2 It should be recognized that fabrics can be produced with an almost infinite number of construction variables (for example, type of fibers, percentage of fibers, yarn twist, yarn number, warp and pick count, chemical and mechanical finishes). Additionally, fashion or aesthetics dictate that the ultimate consumer may find acceptable articles made from fabrics that do not conform to all of the requirements in Table 1. 4.2.1 Hence, no single performance specification can possibly apply to all the various fabrics that could be utilized for this end-use. 4.3 The uses and significance of particular properties and test emthods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers the performance requirements for woven, knitted, or flocked fabrics to be used in the manufacturing of bedspreads. 1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics

FZ/T 64011-2001 桑蚕丝针织服装

本标准规定了静电植绒织物的要求、抽样、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以机织物、针织物为基布的静电植绒织物。

Static flocking fabrics

FZ/T 43015-2001 桑蚕丝针织服装

本标准规定了桑蚕丝纬编圆机针织服装(以下简称桑蚕丝针织服装)的产品品种、规格、要求、分等规定、试验方法、检验规则、包装和标志。 本标准适用于鉴定桑蚕丝针织服装的品质，桑蚕丝与其他纤维混纺、交织的针织服装可参照执行。 本标准不适用于细丝针织服装品质的鉴定。

Silk knitting garments

SANS 8498:1990 机织织物．缺陷描述．词汇

Describes defects which commonly appear during the inspection of woven piece-goods.

Woven fabrics - Description of defects - Vocabulary

ASTM D4235-01 妇女和女孩用针织女衬衫和服装织物标准性能规范

1.1 This performance specification covers knitted fabrics comprised of any textile fiber or mixture of fibers, used in women''s and girls'' blouses and dresses women''s and girls'' knitted blouse and dress fabrics composed of any fiber or mixture of textile fibers. 1.2 These requirements apply to the length and width directions for those properties where each fabric direction is pertinent. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Women''s and Girls'' Knitted Blouse and Dress Fabrics

ASTM D4119-01 男人及男孩用针织衬衫织物的标准性能规范

1.1 This performance specification covers knitted fabrics comprised of any textile fiber or mixture of fibers, used in men''s and boy''s dress shirts. 1.2 This performance specification is not applicable to knitted fabrics used for interlinings. 1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Men''s and Boys'' Knitted Dress Shirt Fabrics