W63 针织品 标准查询与下载

EN ISO 13015:2013 机织物.变形.偏斜和弯曲测定

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Verzugs eines Gewebes fest, bei dem die Schussfaden grundsatzlich senkrecht zu den Kettfaden liegen.

Woven fabrics - Distortion - Determination of skew and bow

ISO 13015:2013 机织物.变形.扭曲和弯曲测定

This International Standard specifies a method for the determination of the distortion of a woven fabric in which the weft yarns are, in principle, perpendicular to the warp yarns.

Woven fabrics.Distortion.Determination of skew and bow

FZ/T 24019-2012 印花羊绒针织品

Printed Cashmere Knitwear

DB43/T 762-2013 拒水、防油、易去污功能针织T恤衫

Water-repellent, oil-repellent, easy-to-stain function knitted T-shirt

DB43/T 763-2013 苎麻生物脱胶技术应用规程

Ramie biological degumming technology application rules

ASTM D4035-13 针织领带和围巾织物的标准性能规格

5.1 Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. 5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D4035 except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers knitted necktie and scarf fabrics composed of any textile fiber or mixture of textile fibers. 1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.3 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Knitted Necktie and Scarf Fabrics

ASTM D3782-13e1 男人和男孩用针织大礼服织物和针织休闲夹克、家常裤和裤子织物的标准性能规格

5.1 Knitted fabrics should meet all of the requirements in Table 1 to be suitable for use in the manufacture of dress suits and sportswear jackets, slacks, and trousers for men and boys. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable some fabrics that do not conform to all of the requirements in Table 1. For example, the fabric could be dyed in shades that do not meet the requirement in Table 1 for colorfastness to light, yet be acceptable to the ultimate consumer because the shade is fashionable. In such cases, one or more of the requirements may be modified by mutual agreement between the purchaser and the seller. 5.2.1 If any of the requirements in Table 1 are modified by mutual agreement between the purchaser and the seller, any reference to the specification shall specify that “this fabric meets ASTM Specification D3782 except for the following characteristic(s).” 5.3 The uses and significance of particular properties are discussed in the appropriate sections of the specific methods. 1.1 This performance specification covers men''s and boys'' knitted dress suit and knitted sportswear jacket, slack, and trouser fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance specification is not applicable to knitted fabrics used for interlinings. 1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Men''s and Boys'' Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics

ASTM D3782-13 男人和男孩用针织大礼服织物和针织休闲夹克、家常裤和裤子织物的标准性能规格

5.1 Knitted fabrics should meet all of the requirements in Table 1 to be suitable for use in the manufacture of dress suits and sportswear jackets, slacks, and trousers for men and boys. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable some fabrics that do not conform to all of the requirements in Table 1. For example, the fabric could be dyed in shades that do not meet the requirement in Table 1 for colorfastness to light, yet be acceptable to the ultimate consumer because the shade is fashionable. In such cases, one or more of the requirements may be modified by mutual agreement between the purchaser and the seller. 5.2.1 If any of the requirements in Table 1 are modified by mutual agreement between the purchaser and the seller, any reference to the specification shall specify that “this fabric meets ASTM Specification D3782 except for the following characteristic(s).” 5.3 The uses and significance of particular properties are discussed in the appropriate sections of the specific methods. 1.1 This performance specification covers men''s and boys'' knitted dress suit and knitted sportswear jacket, slack, and trouser fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance specification is not applicable to knitted fabrics used for interlinings. 1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Men''s and Boys'' Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics

ASTM D3995-13 男人和女人针织职业装织物的标准性能规格:女装和职业装

5.1 Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modifed by mutual agreement between the purchaser and the seller. 5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D3995 except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers the minimum performance requirements for men''s and women''s knitted fabrics for dress and vocational career apparel composed of any textile fiber or mixtures of textile fibers. 1.2 This performance specification is not applicable to career apparel fabrics such as those used in protective clothing, that do not patently fit the categories Career Apparel or Career Apparel, Dress (see Terminology D7022 for these terms). Minimum performance specifications for such fabrics should be as agreed between the purchaser and the seller. 1.3 These requirements apply to the length and width directions for those factors where each fabric direction is pertinent. 1.4 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Men''s and Women''s Knitted Career Apparel Fabrics: Dress and Vocational

FZ/T 70009-2012 毛纺织产品经洗涤后松弛尺寸变化率和毡化尺寸变化率试验方法

本标准规定了测定毛纺织产品经洗涤后松弛尺寸变化率和毡化尺寸变化率的试验方法。本标准适用于可水洗(手洗或机洗)的毛针织产品和毛机织面料。

Test method for relaxation dimensional change and felting dimesional change to washing of wool textiles

FZ/T 70008-2012 毛针织物编织密度系数试验方法

本标准规定了测定毛针织物编织密度系数的试验方法。本标准适用于平纹、罗纹和双罗纹组织的毛针织物。

Test method for cover factor of wool knitted fabrics

FZ/T 73022-2012 针织保暖内衣

本标准规定了针织保暖内衣产品型号、要求、试验方法、判定规则、产品使用说明和包装。 本标准适用于鉴定针织保暖内衣产品品质。 本标准不适用于絮片类产品。

Knitted thermal underwear

FZ/T 73043-2012 针织衬衫

本标准规定了针织衬衫的产品型号、要求、检验规则、判定规则、产品使用说明书、包装、运输和贮存。 本标准适用于鉴定以针织面料为主要材料制成的针织衫的品质。

Knitted shirts

FZ/T 73005-2012 低含毛混纺及仿毛针织品

本标准规定了低含毛混纺及仿毛针织品的技术要求、试验方法、检验及验收规则和包装、标志。 本标准适用于鉴定精、粗梳含羊毛30%以下的低含毛混纺针织品以及非羊毛维纯纺或混纺的仿毛针织品的品质。其他动物毛纤维亦可参照执行。

Low wool content and wool like knitting goods

FZ/T 73044-2012 针织配饰品

本标准规定了针织配饰品的术语和定义、产品规格、要求、检验规则、判定规则、产品使用说明书、包装、运输和贮存。 本标准适用于鉴定以纺织纤维为主要原料，采用针织工艺加工制成的配饰品，包括：发带、腰带、领结、耳套、脖套、臂套、护腕（非运动型）、装饰包、装饰手套等的品质。

Knitted accessories

FZ/T 70014-2012 针织T恤衫规格尺寸系列

本标准规定了针织T恤衫的术语和定义、要求和规格尺寸系列。 本标准适用于针织面料制作的T恤衫正装产品。

A series of size of knitted T-shirt

FZ/T 73020-2012 针织休闲服装

本标准规定了针织休闲服装的产品号型、要求、试验方法、判定规则、产品使用说明书、包装、运输和贮存。 本标准适用于鉴定以纺织针织面料为主要材料制成的针织休闲服装的品质。

Knitted casual wear

SN/T 3472-2012 进出口纺织品质量符合性评价方法 服装 针织服装

本标准规定了进出口针织服装符合性评价的要求、程序和评价报告内容。本标准适用于各类进出口针织服装法规性要求和非法规性要求的质量符合性评价。

The quality conformity evaluation method of textiles for import and export.Clothing.Knitwear

ASTM D5433-12 公共机构和家用毛巾制品的标准性能规范

Upon mutual agreement between the purchaser and the supplier, woven or knitted products intended for this end use should meet all of the requirements listed in Table 1 of this specification for terry products and Table 2 for non terry products. It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable products that do not conform to all of the requirements in Table 1 or Table 2. Therefore, one or more of the requirements listed in Table 1 or Table 2 may be modified by mutual agreement between the purchaser and the seller. In such cases, any references to the specification shall specify that: This product meets ASTM Specification 63-707 except for the following characteristic(s). Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 or Table 2 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style. The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods.1.1 This specification covers the evaluation of specific performance characteristics of importance in woven and knitted kitchen towel, dishcloth, crash towel, huck towel, washcloth, hand towel, bath towel, and bath sheet products for use in institutional and household environments. 1.2 This specification may be used by mutual agreement between the purchaser and the supplier to establish purchasing specification requirements. 1.3 The requirements in Tables 1 and 2 apply to the length and width directions for those properties where fabric direction is pertinent. 1.4 This specification is not applicable for coated and laminated products, nonwoven products, or terry fabrics used for apparel. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. TABLE 1 Woven or Knitted Terry Fabric Specification Requirements Terry Requirements Kitchen Towels DishclothsBath, Hand, Washcloths, Bath SheetsSection Breaking Strength (CRE)7.1 Length178 N (40 lbf) min220 N (50 lbf) min 178 N (40 lbf) min Width133 N (30 lbf) min178 N (40 lbf) min 133 N (30 lbf) min Bursting Strength (knits only) Diaphragm

Standard Performance Specification for Towel Products for Institutional and Household Use

ASTM D5378-12 单位和家用编织和针织浴帘的标准性能规范

Upon mutual agreement between the purchaser and the supplier, woven and knitted products intended for this end use should meet all of the requirements listed in Table 1 of this specification. It is recognized that for the purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable products that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. In such cases, any references to the specification shall specify that: this product meets Specification D5378 except for the following characteristic(s). Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 4.2, ultimate consumer demands dictate varying performance parameters for any particular style. The significance and uses of particular properties and test methods are discussed in the appropriate sections of the specified test methods.1.1 This specification covers the evaluation of specific performance characteristics of importance in woven and knitted shower curtains for use in institutional and household environments. 1.2 This specification may be used by mutual agreement between purchaser and supplier to establish purchasing specification requirements. 1.3 The requirements in Table 1 apply to the length and width directions for those properties where fabric direction is pertinent. 1.4 This specification is not applicable for coated, laminated or vinyl product. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. TABLE 1 Specification Requirements Note8212;Grade in a, b, and c, is based on a numerical scale of 5 for negligible or no color change or color transfer to 1 for severe color change or color transfer. CharacteristicRequirementSection Breaking Force (Load) (CRT) 7.1.1 Dry178 N (40 lbf), minimum Wet89 N (20 lbf), minimum Bursting Force (Knit Fabrics)178 N (40 lbf), minimum7.1.2 Dimensional Change (L× W)3.0 % maximum7.1.3 Skew 4.0 % maximum7.1.4 Colorfastness: Laundering 7.1.5.1

Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use