W63 针织品 标准查询与下载

JIS L 1094:2014 机织品和针织品静电倾向的测试方法

Testing methods for electrostatic propensity of woven and knitted fabrics

ASTM D3782-14 男人和男孩用针织大礼服织物和针织休闲夹克、家常裤和裤子织物的标准性能规格

5.1 Knitted fabrics should meet all of the requirements in Table 1 to be suitable for use in the manufacture of dress suits and sportswear jackets, slacks, and trousers for men and boys. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable some fabrics that do not conform to all of the requirements in Table 1. For example, the fabric could be dyed in shades that do not meet the requirement in Table 1 for colorfastness to light, yet be acceptable to the ultimate consumer because the shade is fashionable. In such cases, one or more of the requirements may be modified by mutual agreement between the purchaser and the seller. 5.2.1 If any of the requirements in Table 1 are modified by mutual agreement between the purchaser and the seller, any reference to the specification shall specify that “this fabric meets ASTM Specification D3782 except for the following characteristic(s).” 5.3 The uses and significance of particular properties are discussed in the appropriate sections of the specific methods. 1.1 This performance specification covers men's and boys' knitted dress suit and knitted sportswear jacket, slack, and trouser fabrics composed of any textile fiber or mixture of textile fibers. 1.2 This performance specification is not applicable to knitted fabrics used for interlinings. 1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Menrsquo;s and Boysrsquo; Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics

ASTM D3995-14 男人和女人针织职业装织物的标准性能规格:女装和职业装

5.1 Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modifed by mutual agreement between the purchaser and the seller. 5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D3995 except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers the minimum performance requirements for men's and women's knitted fabrics for dress and vocational career apparel composed of any textile fiber or mixtures of textile fibers. 1.2 This performance specification is not applicable to career apparel fabrics such as those used in protective clothing, that do not patently fit the categories Career Apparel or Career Apparel, Dress (see Terminology D7022 for these terms). Minimum performance specifications for such fabrics should be as agreed between the purchaser and the seller. 1.3 These requirements apply to the length and width directions for those factors where each fabric direction is pertinent. 1.4 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Menrsquo;s and Womenrsquo;s Knitted Career Apparel Fabrics: Dress and Vocational

ASTM D4119-14 男人及男孩用针织衬衫织物的标准性能规格

5.1 Upon agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified upon agreement between the purchaser and the seller. 5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D4119 except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The uses and significance of particular properties and methods are discussed in the appropriate sections of the specified methods. 1.1 This performance specification covers knitted fabrics comprised of any textile fiber or mixture of fibers, used in men's and boy's dress shirts. 1.2 This performance specification is not applicable to knitted fabrics used for interlinings. 1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Menrsquo;s and Boysrsquo; Knitted Dress Shirt Fabrics

ASTM D4156-14 妇女和女孩用针织运动服织物的标准性能规格

5.1 Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. 5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D4156 except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers knitted fabrics comprised of any textile fiber or mixture of fibers, used in women's and girl's sportswear. 1.2 These requirements apply to the length and width directions for those properties where each fabric direction is pertinent. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Womenrsquo;s and Girlsrsquo; Knitted Sportswear Fabrics

ASTM D4115-14 妇女及女孩用针织和机织服装,手套织物的标准性能规格

5.1 Upon agreement between the purchaser and the supplier, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified upon agreement between the purchaser and the supplier. 5.2.1 In such cases, any references to the specification shall specify that. “This fabric meets ASTM Specification D4115 except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The significance and use of particular properties and methods are discussed in the appropriate sections of the specified methods. 1.1 This performance specification covers woven and knitted fabrics comprised of any textile fiber or mixture of fibers to be used in women's and girls' dress gloves. 1.2 This performance specification is not applicable to fabrics used for interlinings and industrial-protective clothing. 1.3 These requirements apply to the length and width directions for those properties where each fabric direction is pertinent. 1.4 The following precautinary statement pertains only to the test methods portion, Section 7, of this performance specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Womenrsquo;s and Girlsrsquo; Knitted and Woven Dress Glove Fabrics

GOST 5007-2014 针织五指手套和连指手套 通用规格

Knitted gloves and mittens. General specifications

ASTM D4116-14 妇女及女孩用针织和机织紧身束腰胸衣织物的标准性能规格

5.1 Upon agreement between the purchaser and the supplier, fabrics intended for this end use should meet all the requirements listed in Table 1 of this performance specification. 5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified upon agreement between the purchaser and the supplier. 5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D4116 except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The uses and significance of particular properties and methods are discussed in the appropriate sections of the specified methods. 1.1 This performance specification covers woven and knitted fabrics composed of any textile fiber or mixture of fibers used in corsets, girdles or a combination of the same. 1.2 This performance specification is not applicable to knitted or woven corset-girdle-combination fabrics, to knitted lace fabrics, and to fabrics used for interlinings. 1.3 These requirements apply to the length and width directions for those properties where each fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Womenrsquo;s and Girlsrsquo; Knitted and Woven Corset-Girdle-Combination Fabrics

ASTM D4154-14 男人和男孩用针织和机织海滨服和运动衫织物的标准性能规格

5.1 Upon mutual agreement between the purchaser and the supplier, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification. 5.2 It is recognized that for purposes of fashion or aesthetics, the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the supplier. 5.2.1 In such cases, any references to the specification shall specify that: This fabric meets ASTM Specification D4154 except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1 This performance specification covers knitted and woven fabrics comprised of any textile fiber or mixture of fibers used in men's and boy's beachwear and sports shirts. 1.2 This performance specification is not applicable to knitted and woven fabrics used for interlining and swimwear. 1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Menrsquo;s and Boysrsquo; Knitted and Woven Beachwear and Sports Shirt Fabrics

DB37/T 2408-2013 本色针织劳保手套

本标准适用于以天然纤维、化学纤维为主要原料经机器直接编织制成的劳保手套。

Natural color knitted work gloves

FZ/T 74001-2013 纺织品 针织运动护具

本标准规定了针织运动护具的术语和定义、产品分类、要求、试验方法、判定规则以及标志、包装、运输和贮存。本标准适用于以纺织纤维为主要原料采用针织工艺织造成型的或采用针织布与聚氨酯泡沫材料贴合制作的针织运动护具,包括护腕、护臂、护肘、护肩、护膝、护腿、护踝、护腰及头带等产品。

Textiles.Knitted sports protectors

FZ/T 73045-2013 针织儿童服装

本标准规定了针织儿童服装的产品号型、要求、检验规则、判定规则、产品使用说明、包装、运输和贮存。本标准适用于以针织面料为主要材料制成的3岁(身高100 cm)以上14岁以下儿童穿着的针织服装。本标准不适用于针织棉服装、针织羽绒服装。

Knitted children's wear

FZ/T 73025-2013 婴幼儿针织服饰

本标准规定了婴幼儿针织服饰产品的术语和定义、号型规格、要求、试验方法、判定规则、产品使用说明、包装、运输和贮存。本标准适用于针织面料为主料加工制成的婴幼儿针织服饰,包括内衣(套)、外衣、睡衣、连身装、裤子、袜子、脚套、帽子、围兜、肚围、手套、睡袋、包巾、床上用品等。

Knitted garment and adornment for infant

FZ/T 73048-2013 针织五趾袜

本标准规定了针织五趾袜的术语和定义、产品分类、要求、试验方法、判定规则、产品使用说明、包装、运输、贮存等。本标准适用于鉴定各类纤维编织的经编、纬编五趾袜的品质,其他分趾袜和露趾袜可参照执行。

Knitted five-toe Hosiery

FZ/T 73016-2013 针织保暖内衣 絮片型

本标准规定了针织保暖内衣絮片型产品号型、要求、试验方法、判定规则、产品使用说明、包装、运输和贮存。本标准适用于针织保暖内衣絮片型产品。本标准不适用于非絮片型产品。

Knitted thermal underwear.Wadding category

FZ/T 73046-2013 一体成型文胸

本标准规定了一体成型文胸(含一片式和半片式)的术语和定义、型号和规格、要求、检验规则、判定规则、产品使用说明、包装、运输、贮存。本标准适用于鉴定一体成型文胸(含一片式和半片式)产品的品质。

Moulded bra

FZ/T 73019.2-2013 针织塑身内衣 调整型

本标准规定了针织塑身内衣调整型产品的术语和定义、产品分类和型号、要求、检验规则、判定规则、产品使用说明、包装、运输、贮存。本标准适用于鉴定以经编、纬编针织面料为主要材料制成的针织塑身内衣调整型产品的品质。其他产品可参照执行。

Knitted shape wear.Figured-style

FZ/T 73011-2013 针织腹带

本标准规定了针织腹带的型号、要求、检验规则、判定规则、产品使用说明、包装、运输、贮存。本标准适用于鉴定经纬编针织腹带的品质。

Knitted binder

FZ/T 73047-2013 针织民用手套

本标准规定了针织民用手套的号型、要求、试验方法、判定规则、产品使用说明、包装、运输、贮存。本标准适用于鉴定以各类纺织纤维为主体的针织民用手套的品质(包括编织和缝制)。

Knitted civil gloves

FZ/T 35001-2013 苎麻袜

本标准规定了苎麻袜的术语和定义、要求、试验方法、判定规则、产品使用说明、包装、运输、贮存。本标准适用于鉴定苎麻袜(苎麻纤维含量在50%及以上)的品质。苎麻混纺袜(苎麻含量在35%及以上)可参照执行。

Ramie sock