W95 染整机械与器具 标准查询与下载
共找到 145 条与 染整机械与器具 相关的标准，共 10 页
本标准规定了交叉卷绕染色用圆锥形筒管的分类、要求、试验方法、检验规则、包装和标志。 本标准适用于半锥角为 4 °20′，绕纱宽度不超过l-25mm的交叉卷绕染色用圆锥形筒管（以下简称“染色锥形管 ”）。 本标准也适用于半锥角为 3°30′、 5°57′，绕纱宽度不超过 l-25mm 的染色锥形管。
Textile machinery and accessories- Cones for cross winding dyeing process- Technology terms
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 2007-05-29
- 实施
- 2007-11-01
本标准规定了圆网印花机的产品分类、要求、试验方法、检验规则、标志和包装、运输、贮存。 本标准适用于天然纤维、化学纤维及其混纺的机织物、针织物、非织造物等印花用的圆网印花机。刮刀式被加工物重量不大于 280 g/m，磁棒式被加工物重量不大于 800 g/m。
Rotary screen printing machine
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 2007-05-29
- 实施
- 2007-10-01
本标准规定了分批整经机的型式、主要技术参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于棉、化纤及混纺97.2tex～5.83tex(6～100)纱整经用的分批整经机。
Batch warping machine
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 2006-03-07
- 实施
- 2006-08-01
이 규격은 생산 설비에서 개별 기계의 조합을 용이하게 하고 구동 장치의 선택을 단순화하기
Textile machinery-Dyeing and finishing machines-Nominal speeds
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 2005-06-13
- 实施
- 2005-06-13
이 규격은 염색 및 후가공기의 권취 장치로 사용되는 A형 및 B형 정사각 바의 치수에 대하
Textile machinery-Square bars winding devices relating to dyeing and finishing machines-Dimensions
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 2005-06-13
- 实施
- 2005-06-13
To be read in conjunction with BS EN ISO 11111-1
Textile machinery - Safety requirements - Dyeing and finishing machinery
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 2005-03-21
- 实施
- 2005-03-21
This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1. It specifies significant hazards and corresponding safety requirements and/or measures for dyeing and finishing machinery. By taking into account the scope of ISO 11111-1 as far as is relevant, this part of ISO 11111 is applicable to all machinery, plant and related equipment intended to be used in preparation, dyeing, printing, fixation, wetting, drying, finishing and making-up/presentation, as specified in Clause 5.
Textile machinery - Safety requirements - Dyeing and finishing machinery
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 2005-03-21
- 实施
- 2005-03-21
This International Standard gives an illustrated nomenclature of machines known as heat-treatment machinery used in the textile finishing industry (bleaching, dyeing, printing and finishing) for the thermal treatmant of fabric with maintenance of the width and adjustment of the latter, if necessary.#,,#
Textile machinery and accessories - Dyeing and finishing machinery - Terms for tentering and heat-treatment machinery (ISO 5250:2003)
- ICS
- 01.040.59;59.120.50
- CCS
- W95
- 发布
- 2004-03
- 实施
This International Standard gives an illustrated nomenclature for the most common ancillary devices place before, between and after dyeing and finishing machines.#,,#
Textile machinery and accessories - Dyeing and finishing machinery - Vocabulary of ancillary devices (ISO 5248:2003)
- ICS
- 01.040.59;59.120.50
- CCS
- W95
- 发布
- 2004-03
- 实施
이 규격은 제직을 위한 경사 준비에 관한 영역에 사용되는 용어를 규정한다.
Textile machinery and accessories-Warping machinery-Preparation of warp for weaving-vocabulary
- ICS
- 59.120.30
- CCS
- W95
- 发布
- 2004-02-14
- 实施
- 2004-02-14
Textile machinery - Dyeing and finishing machines - Nominal speeds (ISO 10457:2002)
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 2003-11
- 实施
This International Standard gives an illustrated nomenclature of machines known as tenters (US) and/or stenters (GB), used in the textile finishing industry (bleaching, dyeing, printing and finishing), for the thermal treatment of fabric with maintenance of the width and adjustment of the latter, if necessary. The terms used are placed under the following headings: 1 Kinds of tentering and heat-treatment machines 2 Machine features 3 Designation of side and indication of dimensions 4 Elements of construction NOTE In addition to terms given in the two official ISO languages (English and French), this International Standard gives the equivalent terms in German, published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
Textile machinery and accessories - Dyeing and finishing machinery - Terms for tentering and heat-treatment machinery
- ICS
- 01.040.59;59.120.50
- CCS
- W95
- 发布
- 2003-07-17
- 实施
- 2003-07-17
This International Standard gives an illustrated nomenclature of machines known as tenters (US) and/or stenters (GB), used in the textile finishing industry (bleaching, dyeing, printing and finishing), for the thermal treatment of fabric with maintenance of the width and adjustment of the latter, if necessary. The terms used are placed under the following headings: 1 Kinds of tentering and heat-treatment machines 2 Machine features 3 Designation of side and indication of dimensions 4 Elements of construction NOTE In addition to terms given in the two official ISO languages (English and French), this International Standard gives the equivalent terms in German, published under the responsibility of the member body for Germany (DIN). However, only the terms and definitions given in the official languages can be considered as ISO terms and definitions.
Textile machinery and accessories - Dyeing and finishing machinery - Terms for tentering and heat-treatment machinery
- ICS
- 01.040.59;59.120.50
- CCS
- W95
- 发布
- 2003-06
- 实施
This International Standard presents an illustrated vocabulary of the most common ancillary devices placed before, between and after dyeing and finishing machines. The terms thus defined are placed under the following headings: 1 Feeding of material 2 Guiding of material 3 Control of speed of material 4 Accumulation of material 5 Treatment of material 6 Delivery of material 7 Transport of material NOTE In addition to terms and definitions in the two official ISO languages (English and French), the equivalents are given in German, under the responsibility of the member body for Germany. However, only the terms and definitions given in the official languages are to be considered as ISO terms and definitions.
Textile machinery and accessories - Dyeing and finishing machinery - Vocabulary for ancillary devices
- ICS
- 01.040.59;59.120.50
- CCS
- W95
- 发布
- 2003-03
- 实施
This International Standard specifies nominal speeds for dyeing and finishing machines, with the aim of simplifying the choice of the drive units and facilitating the combination of individual machines in a production plant.
Textile machinery - Dyeing and finishing machines - Nominal speeds
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 2002-10
- 实施
이 규격은 직기 부속기인 고속 복동식 자카드에 대하여 규정한다.
Double lift jacquard
- ICS
- 59.120.30
- CCS
- W95
- 发布
- 2002-07-30
- 实施
- 2002-07-30
本标准规定了弹性辊的分类、要求、试验方法、检验规则及标记、包装、运输、贮存。 本标准适用于染整设备中的轧光机弹性辊。
Calender flexible roller
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 1999-11-19
- 实施
- 1999-12-01
本标准规定了夹烫机的安全要求和试验方法。 本标准适用于由棉、毛、麻、化纤等织物烫平的夹烫机。
Safety requirements of presses
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 1999-08-06
- 实施
- 2000-01-01
本标准规定了人像精整机的型式、基本参数、技术要求、试验方法、检验规则、包装、运输和贮存。 本标准适用于由棉、毛、麻、丝和化纤等织物制成的上装，经干洗后的敞开式人像精整机。
Body presses
- ICS
- 59.120.50
- CCS
- W95
- 发布
- 1999-08-06
- 实施
- 2000-01-01
